[Wed May 29 10:58:13 2013] Detection parameters:
  Position = (286.4, 353.0) = 5 38 52.08 -2 33 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.9 +/- 19.6
  Background counts = 47.5
  Rate = 0.009 +/- 0.0008

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 4.05'
[Wed May 29 10:59:10 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Wed May 29 10:59:10 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.503
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 8.45"
[Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src43.ximg exists
[Wed May 29 10:59:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src43.csv
[Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed May 29 10:59:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src43.csv
[Wed May 29 10:59:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src43.csv
[Wed May 29 10:59:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:43 2013] Spatial fit model total counts = 1228.710000, observed total counts = 633.000000
[Wed May 29 10:59:43 2013] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:33 2013] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 8.45"
[Wed May 29 11:00:33 2013] source mask rpix=1.9, npix_max = 23, mask sum = 12, frac = 0.503
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 8.45"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src43.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src43.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src43_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src43.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43.csv
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43.csv
[Wed May 29 11:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:57 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 15.005515 pixels away
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:48 2013] XMMSAS src. selection expression = ellipse(24865.973663, 30659.231659, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:01:48 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_src.reg
[Wed May 29 11:01:48 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (249, 315) - (324, 390)
[Wed May 29 11:01:48 2013] XMMSAS bgd. selection expression = annulus(24865.973663, 30659.231659, 1087.500000, 2175.000000, X, Y) && !ellipse(27031.125000, 27626.096200, 1293.880837, 1293.880837, 0.000000, X, Y) && !ellipse(26295.246450, 28017.982386, 1188.443178, 1158.548808, 90.000000, X, Y) && !ellipse(28923.912476, 28989.260712, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27221.791779, 31725.342743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.624420, 30660.925568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27576.795746, 30738.991394, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 11:01:48 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52.gif
[Wed May 29 11:01:59 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.evt exist, delete to re-create
[Wed May 29 11:01:59 2013] Mean detx,y = (-1810.34, -3338.92) 
[Wed May 29 11:01:59 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.img exist, delete to re-create
[Wed May 29 11:01:59 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.pi exist, delete to re-create
[Wed May 29 11:01:59 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Wed May 29 11:01:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Wed May 29 11:01:59 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.lc exist, delete to re-create
[Wed May 29 19:16:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:16:11 2013] rmf not generated due to insufficient counts
[Wed May 29 19:59:42 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:42 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 484.00
[Wed May 29 19:59:42 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.pi.gz = 2079.00
[Wed May 29 19:59:42 2013] Got source and background scale factors 908838.000000, 7534081.000000
[Wed May 29 19:59:42 2013] User source parameters:
  Position = (286.4, 353.0) = 5 38 52.08 -2 33 27.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 233.2 +/- 23.0
  Background aperture counts = 250.8
  Rate = 0.006 +/- 0.0006

[Wed May 29 19:59:42 2013] Updating counts from extracted products
[Wed May 29 19:59:42 2013] Set source signif. to 233.21/15.84 = 14.73
[Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.00571, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52.arf
[Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:50 2013] Updating source flux to 7.7e-14
[Wed May 29 20:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete