[Wed May 29 10:58:13 2013] Detection parameters:
  Position = (186.4, 393.1) = 5 39 21.11 -2 30 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.6 +/- 19.0
  Background counts = 29.1
  Rate = 0.005 +/- 0.0005

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 10.63'
[Wed May 29 10:59:10 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Wed May 29 10:59:10 2013] source mask rpix=2.7, npix_max = 40, mask sum = 30, frac = 0.732
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 11.75"
[Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src40.ximg exists
[Wed May 29 10:59:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src40.csv
[Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src40_1.ximg exists
[Wed May 29 10:59:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src40.csv
[Wed May 29 10:59:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src40.csv
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src40.csv
[Wed May 29 10:59:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:43 2013] Warning, spatial fit 40 centroid is now closest to src. 7
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:59:43 2013] Source is confused with source 50
[Wed May 29 11:00:33 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Wed May 29 11:00:33 2013] source mask rpix=2.7, npix_max = 40, mask sum = 30, frac = 0.732
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 11.75"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src40.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src40.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src40.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed May 29 11:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:57 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 13.548705 pixels away
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:48 2013] XMMSAS src. selection expression = ellipse(16166.799377, 34149.764160, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:01:48 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_src.reg
[Wed May 29 11:01:48 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (149, 356) - (224, 431)
[Wed May 29 11:01:48 2013] XMMSAS bgd. selection expression = annulus(16166.799377, 34149.764160, 1087.500000, 2175.000000, X, Y) && !ellipse(18126.383575, 36571.363281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17027.287735, 35446.305237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17946.892000, 32870.012000, 457.064013, 457.064013, 0.000000, X, Y) && !ellipse(15218.076431, 36766.465454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17229.412000, 33430.808000, 1828.256053, 1828.256053, 0.000000, X, Y)
[Wed May 29 11:01:48 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49.gif
[Wed May 29 11:01:58 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_bgd.evt exist, delete to re-create
[Wed May 29 11:01:58 2013] Mean detx,y = (-10441.10, -7099.25) 
[Wed May 29 11:01:58 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_bgd.img exist, delete to re-create
[Wed May 29 11:01:58 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_bgd.pi exist, delete to re-create
[Wed May 29 11:01:58 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed May 29 11:01:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed May 29 11:01:58 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_bgd.lc exist, delete to re-create
[Wed May 29 19:13:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:13:08 2013] rmf not generated due to insufficient counts
[Wed May 29 19:59:42 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:42 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 363.00
[Wed May 29 19:59:42 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_bgd.pi.gz = 741.00
[Wed May 29 19:59:42 2013] Got source and background scale factors 1032435.000000, 4713686.000000
[Wed May 29 19:59:42 2013] User source parameters:
  Position = (186.4, 393.1) = 5 39 21.11 -2 30 33.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 200.7 +/- 20.1
  Background aperture counts = 162.3
  Rate = 0.005 +/- 0.0005

[Wed May 29 19:59:42 2013] Updating counts from extracted products
[Wed May 29 19:59:42 2013] Set source signif. to 200.70/12.74 = 15.75
[Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.00491, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49.arf
[Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:50 2013] Updating source flux to 7.2e-14
[Wed May 29 20:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete