[Wed May 29 10:58:12 2013] Detection parameters: Position = (260.0, 192.1) = 5 38 59.74 -2 45 8.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 504.5 +/- 28.5 Background counts = 32.5 Rate = 0.01 +/- 0.0007 [Wed May 29 10:58:15 2013] Off-axis axis estimate = 8.20' [Wed May 29 10:59:10 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting [Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 10.53" [Wed May 29 10:59:10 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055 [Wed May 29 10:59:10 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.53" [Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src29.ximg exists [Wed May 29 10:59:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src29.csv [Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src29_1.ximg exists [Wed May 29 10:59:12 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src29.csv [Wed May 29 10:59:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Wed May 29 10:59:14 2013] Fit fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Wed May 29 10:59:43 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 13.054056 pixels away [Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000 [Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 10:59:43 2013] Assessing source extent using major [Wed May 29 10:59:43 2013] Source does appear to be extended [Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 11:00:33 2013] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting [Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 10.53" [Wed May 29 11:00:33 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055 [Wed May 29 11:00:33 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 10.53" [Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src29.ximg exists [Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src29.csv [Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src29_1.ximg exists [Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src29.csv [Wed May 29 11:00:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists [Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists [Wed May 29 11:00:35 2013] Fit fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly [Wed May 29 11:00:57 2013] Spatial fit model total counts = 772.885000, observed total counts = 771.000000 [Wed May 29 11:00:57 2013] Offset between fit and detection position for source 37 = 0.097604 pixels [Wed May 29 11:00:57 2013] 770.064000 total counts/ 398.143000 bgd. counts: snr = 18.639367 Spatial fit parameters: Offset between fit and detection position for source 37 = 0.097604 pixels Position = (260.1, 192.1) = 5 38 59.72 -2 45 8.0 Extent = 6.3 (5.6-7.1)", rotation angle = 0 Source counts = 371.9 +/- 27.8 Background counts = 398.1 Rate = 0.009 +/- 0.0007 [Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000 [Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 11:00:57 2013] Assessing source extent using major axis lower bound [Wed May 29 11:00:57 2013] Source does appear to be extended [Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 11:01:47 2013] XMMSAS src. selection expression = ellipse(22578.541780, 16666.343000, 378.919211, 378.919211, 0.000000, X, Y) [Wed May 29 11:01:47 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_src.reg [Wed May 29 11:01:47 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (238, 170) - (282, 214) [Wed May 29 11:01:47 2013] XMMSAS bgd. selection expression = annulus(22578.541780, 16666.343000, 631.532018, 1263.064036, X, Y) && !ellipse(24505.372894, 18153.881714, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 29 11:01:47 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37.gif [Wed May 29 11:01:57 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_bgd.evt exist, delete to re-create [Wed May 29 11:01:57 2013] Mean detx,y = (-4722.38, 10601.31) [Wed May 29 11:01:57 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_bgd.img exist, delete to re-create [Wed May 29 11:01:57 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_bgd.pi exist, delete to re-create [Wed May 29 11:01:57 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_src_b10.pi.gz [Wed May 29 11:01:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_bgd.pi.gz [Wed May 29 11:01:57 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_bgd.lc exist, delete to re-create [Wed May 29 19:59:40 2013] Updating aperture counts using extracted products [Wed May 29 19:59:40 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 470.00 [Wed May 29 19:59:40 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_bgd.pi.gz = 540.00 [Wed May 29 19:59:40 2013] Got source and background scale factors 445112.000000, 3237182.000000 [Wed May 29 19:59:40 2013] User source parameters: Position = (260.1, 192.1) = 5 38 59.72 -2 45 8.0 Extent = 6.3 (5.6-7.1)", rotation angle = 0 Source aperture counts = 395.8 +/- 22.7 Background aperture counts = 74.2 Rate = 0.01 +/- 0.0006 [Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.00911, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37.arf [Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 19:59:50 2013] Updating source flux to 8.7e-14 [Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete