[Wed May 29 10:58:12 2013] Detection parameters:
  Position = (282.2, 209.2) = 5 38 53.28 -2 43 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 866.1 +/- 36.1
  Background counts = 37.6
  Rate = 0.04 +/- 0.002

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 6.57'
[Wed May 29 10:59:10 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Wed May 29 10:59:10 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.205
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 9.72"
[Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src27.ximg exists
[Wed May 29 10:59:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src27.csv
[Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed May 29 10:59:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src27.csv
[Wed May 29 10:59:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed May 29 10:59:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:43 2013] Warning, spatial fit 27 centroid is now closest to src. 103
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:33 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Wed May 29 11:00:33 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.205
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 9.72"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src27.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src27.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src27.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed May 29 11:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:57 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 11.929538 pixels away
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:47 2013] XMMSAS src. selection expression = ellipse(24505.372894, 18153.881714, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_src.reg
[Wed May 29 11:01:47 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (245, 172) - (320, 247)
[Wed May 29 11:01:47 2013] XMMSAS bgd. selection expression = annulus(24505.372894, 18153.881714, 1087.500000, 2175.000000, X, Y) && !ellipse(26830.323560, 20440.905800, 568.979216, 400.951212, 17.563802, X, Y) && !ellipse(22578.541780, 16666.343000, 505.225615, 505.225615, 0.000000, X, Y) && !ellipse(25566.580139, 21159.775787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27291.234070, 18485.923660, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35.gif
[Wed May 29 11:01:56 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Wed May 29 11:01:56 2013] Mean detx,y = (-2767.83, 9162.51) 
[Wed May 29 11:01:56 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Wed May 29 11:01:56 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Wed May 29 11:01:56 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Wed May 29 11:01:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Wed May 29 11:01:56 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Wed May 29 19:01:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:01:17 2013] rmf not generated due to insufficient counts
[Wed May 29 19:59:39 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:39 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 971.00
[Wed May 29 19:59:39 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 1840.00
[Wed May 29 19:59:39 2013] Got source and background scale factors 1138390.000000, 9186318.000000
[Wed May 29 19:59:39 2013] User source parameters:
  Position = (282.2, 209.2) = 5 38 53.28 -2 43 52.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 743.0 +/- 32.2
  Background aperture counts = 228.0
  Rate = 0.02 +/- 0.0008

[Wed May 29 19:59:39 2013] Updating counts from extracted products
[Wed May 29 19:59:39 2013] Set source signif. to 742.98/15.10 = 49.20
[Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.0182, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35.arf
[Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:50 2013] Updating source flux to 1.4e-13
[Wed May 29 20:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete