[Wed May 29 10:58:12 2013] Detection parameters:
  Position = (286.1, 170.1) = 5 38 52.16 -2 46 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 829.9 +/- 34.0
  Background counts = 32.5
  Rate = 0.02 +/- 0.0008

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 9.35'
[Wed May 29 10:59:10 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Wed May 29 10:59:10 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 11.10"
[Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src25.ximg exists
[Wed May 29 10:59:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src25.csv
[Wed May 29 10:59:12 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed May 29 10:59:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src25.csv
[Wed May 29 10:59:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May 29 10:59:14 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed May 29 10:59:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May 29 10:59:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:43 2013] Source 33 is offset by -7.234447 and 6.447796 pixels which is larger than
2 X fitted extent = 0.917274 x 0.917274, not incorporating fit results
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:33 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Wed May 29 11:00:33 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.966
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.10"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src25.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src25.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src25.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src25.csv
[Wed May 29 11:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:57 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 16.161577 pixels away
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:47 2013] XMMSAS src. selection expression = ellipse(24842.527100, 14751.034210, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_src.reg
[Wed May 29 11:01:47 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (249, 133) - (324, 208)
[Wed May 29 11:01:47 2013] XMMSAS bgd. selection expression = annulus(24842.527100, 14751.034210, 1087.500000, 2175.000000, X, Y) && !ellipse(22578.541780, 16666.343000, 505.225615, 505.225615, 0.000000, X, Y) && !ellipse(27551.073822, 14036.484848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22677.491425, 14150.726776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27468.917400, 15280.391600, 702.256020, 702.256020, 0.000000, X, Y) && !ellipse(27482.135986, 13513.606033, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33.gif
[Wed May 29 11:01:56 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Wed May 29 11:01:56 2013] Mean detx,y = (-2569.18, 12593.99) 
[Wed May 29 11:01:56 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Wed May 29 11:01:56 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Wed May 29 11:01:56 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed May 29 11:01:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed May 29 11:01:56 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Wed May 29 19:00:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:00:42 2013] rmf not generated due to insufficient counts
[Wed May 29 19:59:39 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:39 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 889.00
[Wed May 29 19:59:39 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_bgd.pi.gz = 1450.00
[Wed May 29 19:59:39 2013] Got source and background scale factors 997443.000000, 7685574.000000
[Wed May 29 19:59:39 2013] User source parameters:
  Position = (286.1, 170.1) = 5 38 52.16 -2 46 43.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 700.8 +/- 30.8
  Background aperture counts = 188.2
  Rate = 0.02 +/- 0.0008

[Wed May 29 19:59:39 2013] Updating counts from extracted products
[Wed May 29 19:59:39 2013] Set source signif. to 700.82/13.72 = 51.09
[Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.0172, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33.arf
[Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:50 2013] Updating source flux to 3e-13
[Wed May 29 20:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete