[Wed May 29 10:58:12 2013] Detection parameters:
  Position = (295.9, 285.3) = 5 38 49.30 -2 38 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2162.6 +/- 57.3
  Background counts = 41.8
  Rate = 0.06 +/- 0.002

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 0.97'
[Wed May 29 10:59:10 2013] Using EEF radius (= 6.91 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 6.91"
[Wed May 29 10:59:10 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.916
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 6.91"
[Wed May 29 10:59:11 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src19.ximg exists
[Wed May 29 10:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src19.csv
[Wed May 29 10:59:11 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed May 29 10:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src19.csv
[Wed May 29 10:59:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed May 29 10:59:13 2013] Fit fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed May 29 10:59:43 2013] Spatial fit model total counts = 2496.120000, observed total counts = 2472.000000
[Wed May 29 10:59:43 2013] Offset between fit and detection position for source 27 = 0.191068 pixels
[Wed May 29 10:59:43 2013] 2515.610000 total counts/ 1008.640000 bgd. counts: snr = 47.450032
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.191068 pixels
  Position = (296.0, 285.4) = 5 38 49.30 -2 38 22.0
  Extent = 5.7 (5.5-5.9)", rotation angle = 0
  Source counts = 1507.0 +/- 50.2
  Background counts = 1008.6
  Rate = 0.04 +/- 0.001
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 5.71"
[Wed May 29 11:00:33 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.914
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 5.71"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src19.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src19.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src19.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed May 29 11:00:35 2013] Fit fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed May 29 11:00:57 2013] Spatial fit model total counts = 2492.540000, observed total counts = 2472.000000
[Wed May 29 11:00:57 2013] Offset between fit and detection position for source 27 = 0.001716 pixels
[Wed May 29 11:00:57 2013] 2512.090000 total counts/ 1005.000000 bgd. counts: snr = 47.539669
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.001716 pixels
  Position = (296.0, 285.4) = 5 38 49.30 -2 38 22.0
  Extent = 5.7 (5.5-5.9)", rotation angle = 0
  Source counts = 1507.1 +/- 50.1
  Background counts = 1005.0
  Rate = 0.04 +/- 0.001
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major axis lower bound
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:47 2013] Counts = 1507.090000, rescaling region sizes by 2.000000
[Wed May 29 11:01:47 2013] XMMSAS src. selection expression = ellipse(25701.001040, 24785.245600, 684.813620, 684.813620, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_src.reg
[Wed May 29 11:01:47 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (257, 246) - (335, 325)
[Wed May 29 11:01:47 2013] XMMSAS bgd. selection expression = annulus(25701.001040, 24785.245600, 2282.712066, 4565.424131, X, Y) && !ellipse(27031.125000, 27626.096200, 1293.880837, 1293.880837, 0.000000, X, Y) && !ellipse(26295.246450, 28017.982386, 1188.443178, 1158.548808, 90.000000, X, Y) && !ellipse(28923.912476, 28989.260712, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30192.437683, 29670.198730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29901.058838, 29249.413757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30599.376678, 28053.893890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25040.690521, 27259.750732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25864.185028, 27343.381500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28991.303600, 26862.312200, 463.593613, 463.593613, 0.000000, X, Y) && !ellipse(28064.376780, 25982.708600, 479.563214, 479.563214, 0.000000, X, Y) && !ellipse(22016.288800, 24101.119800, 453.443213, 453.443213, 0.000000, X, Y) && !ellipse(22288.000328, 23246.477049, 399.804781, 367.681898, 255.023451, X, Y) && !ellipse(27186.849113, 22423.863208, 493.186943, 481.794924, 90.530711, X, Y) && !ellipse(26830.323560, 20440.905800, 568.979216, 400.951212, 17.563802, X, Y) && !ellipse(26094.529000, 26061.659000, 325.439209, 325.439209, 0.000000, X, Y) && !ellipse(25760.519815, 25985.648516, 1062.480031, 1059.359429, 347.016017, X, Y) && !ellipse(25566.580139, 21159.775787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28072.986206, 26743.291779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.674000, 25918.434000, 1120.576032, 1120.576032, 0.000000, X, Y) && !ellipse(24558.757568, 24158.718994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22975.722900, 24204.189026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27160.530400, 23856.262000, 1214.672035, 380.205611, 87.972000, X, Y) && !ellipse(27186.262177, 23430.001068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28496.863060, 22413.084400, 683.904820, 683.904820, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27.gif
[Wed May 29 11:01:55 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Wed May 29 11:01:55 2013] Mean detx,y = (-1314.71, 2586.87) 
[Wed May 29 11:01:55 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Wed May 29 11:01:55 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Wed May 29 11:01:55 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed May 29 11:01:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed May 29 11:01:55 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Wed May 29 19:59:38 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:38 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 2300.00
[Wed May 29 19:59:38 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 6908.00
[Wed May 29 19:59:38 2013] Got source and background scale factors 1470400.000000, 25627317.000000
[Wed May 29 19:59:38 2013] User source parameters:
  Position = (296.0, 285.4) = 5 38 49.30 -2 38 22.0
  Extent = 5.7 (5.5-5.9)", rotation angle = 0
  Source aperture counts = 1903.6 +/- 49.0
  Background aperture counts = 396.4
  Rate = 0.05 +/- 0.001

[Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.0369, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27.arf
[Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:50 2013] Updating source flux to 1.8e-13
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete