[Wed May 29 10:58:12 2013] Detection parameters:
  Position = (288.4, 313.9) = 5 38 51.50 -2 36 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 691.3 +/- 34.4
  Background counts = 47.6
  Rate = 0.02 +/- 0.001

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 1.34'
[Wed May 29 10:59:10 2013] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 7.10"
[Wed May 29 10:59:10 2013] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.660
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.10"
[Wed May 29 10:59:11 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 29 10:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src15.csv
[Wed May 29 10:59:11 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 29 10:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src15.csv
[Wed May 29 10:59:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 29 10:59:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 29 10:59:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 29 10:59:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:43 2013] Spatial fit model total counts = 2368.270000, observed total counts = 1770.000000
[Wed May 29 10:59:43 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:33 2013] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 7.10"
[Wed May 29 11:00:33 2013] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.660
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 7.10"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src15.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src15.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src15.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed May 29 11:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:57 2013] Spatial fit model total counts = 2364.800000, observed total counts = 1770.000000
[Wed May 29 11:00:57 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:47 2013] XMMSAS src. selection expression = ellipse(25040.690521, 27259.750732, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_src.reg
[Wed May 29 11:01:47 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (251, 276) - (326, 351)
[Wed May 29 11:01:47 2013] XMMSAS bgd. selection expression = annulus(25040.690521, 27259.750732, 1087.500000, 2175.000000, X, Y) && !ellipse(27031.125000, 27626.096200, 1293.880837, 1293.880837, 0.000000, X, Y) && !ellipse(26295.246450, 28017.982386, 1188.443178, 1158.548808, 90.000000, X, Y) && !ellipse(28923.912476, 28989.260712, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25864.185028, 27343.381500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25701.001040, 24785.245600, 456.542413, 456.542413, 0.000000, X, Y) && !ellipse(26094.529000, 26061.659000, 325.439209, 325.439209, 0.000000, X, Y) && !ellipse(25760.519815, 25985.648516, 1062.480031, 1059.359429, 347.016017, X, Y) && !ellipse(28072.986206, 26743.291779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.674000, 25918.434000, 1120.576032, 1120.576032, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23.gif
[Wed May 29 11:01:54 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Wed May 29 11:01:54 2013] Mean detx,y = (-1790.66, 43.11) 
[Wed May 29 11:01:54 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Wed May 29 11:01:54 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Wed May 29 11:01:54 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed May 29 11:01:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed May 29 11:01:54 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Wed May 29 17:33:13 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 17:33:13 2013] rmf not generated due to insufficient counts
[Wed May 29 19:59:37 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:37 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 1499.00
[Wed May 29 19:59:37 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_bgd.pi.gz = 983.00
[Wed May 29 19:59:37 2013] Got source and background scale factors 1027504.000000, 4113145.000000
[Wed May 29 19:59:37 2013] User source parameters:
  Position = (288.4, 313.9) = 5 38 51.50 -2 36 19.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1253.4 +/- 39.7
  Background aperture counts = 245.6
  Rate = 0.03 +/- 0.001

[Wed May 29 19:59:37 2013] Updating counts from extracted products
[Wed May 29 19:59:37 2013] Set source signif. to 1253.44/15.67 = 79.99
[Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.0307, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23.arf
[Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:50 2013] Updating source flux to 2.1e-13
[Wed May 29 20:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete