[Wed May 29 10:58:12 2013] Detection parameters:
  Position = (218.8, 317.3) = 5 39 11.71 -2 36 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 984.2 +/- 37.1
  Background counts = 34.3
  Rate = 0.05 +/- 0.002

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 5.94'
[Wed May 29 10:59:10 2013] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 9.40"
[Wed May 29 10:59:10 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.883
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 9.40"
[Wed May 29 10:59:11 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src14.ximg exists
[Wed May 29 10:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src14.csv
[Wed May 29 10:59:11 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed May 29 10:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src14.csv
[Wed May 29 10:59:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed May 29 10:59:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed May 29 10:59:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May 29 10:59:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:43 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.902942 pixels away
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:33 2013] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 9.40"
[Wed May 29 11:00:33 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.883
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 9.40"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src14.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src14.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src14.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May 29 11:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May 29 11:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:57 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.902942 pixels away
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:47 2013] XMMSAS src. selection expression = ellipse(18983.123032, 27554.724487, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_src.reg
[Wed May 29 11:01:47 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (181, 280) - (256, 355)
[Wed May 29 11:01:47 2013] XMMSAS bgd. selection expression = annulus(18983.123032, 27554.724487, 1087.500000, 2175.000000, X, Y) && !ellipse(20360.477890, 30463.139160, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22.gif
[Wed May 29 11:01:54 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Wed May 29 11:01:54 2013] Mean detx,y = (-7971.91, -420.84) 
[Wed May 29 11:01:54 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Wed May 29 11:01:54 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Wed May 29 11:01:54 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed May 29 11:01:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed May 29 11:01:54 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Wed May 29 17:32:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 17:32:45 2013] rmf not generated due to insufficient counts
[Wed May 29 19:59:36 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:37 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 1056.00
[Wed May 29 19:59:37 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1795.00
[Wed May 29 19:59:37 2013] Got source and background scale factors 1100950.000000, 9808380.000000
[Wed May 29 19:59:37 2013] User source parameters:
  Position = (218.8, 317.3) = 5 39 11.71 -2 36 1.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 854.5 +/- 33.5
  Background aperture counts = 201.5
  Rate = 0.02 +/- 0.0008

[Wed May 29 19:59:37 2013] Updating counts from extracted products
[Wed May 29 19:59:37 2013] Set source signif. to 854.52/14.19 = 60.20
[Wed May 29 19:59:50 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:50 2013] Using photon index=1.80, rate=0.0209, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22.arf
[Wed May 29 19:59:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:50 2013] Updating source flux to 1.8e-13
[Wed May 29 20:00:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete