[Wed May 29 10:58:12 2013] Detection parameters:
  Position = (121.3, 356.0) = 5 39 39.99 -2 33 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 685.6 +/- 32.8
  Background counts = 29.9
  Rate = 0.02 +/- 0.0008

[Wed May 29 10:58:15 2013] Off-axis axis estimate = 13.50'
[Wed May 29 10:59:10 2013] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 10:59:10 2013] Initial guess for spatial extent in simple fitting = 13.18"
[Wed May 29 10:59:10 2013] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.124
[Wed May 29 10:59:10 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 13.18"
[Wed May 29 10:59:11 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src13.ximg exists
[Wed May 29 10:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src13.csv
[Wed May 29 10:59:11 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed May 29 10:59:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src13.csv
[Wed May 29 10:59:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed May 29 10:59:13 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed May 29 10:59:13 2013] Fit fullrun_pn_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed May 29 10:59:43 2013] Spatial fit model total counts = 984.408000, observed total counts = 985.000000
[Wed May 29 10:59:43 2013] Offset between fit and detection position for source 16 = 0.203596 pixels
[Wed May 29 10:59:43 2013] 991.231000 total counts/ 530.866000 bgd. counts: snr = 19.980661
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.203596 pixels
  Position = (121.5, 356.1) = 5 39 39.93 -2 33 14.8
  Extent = 7.3 (6.6-8.1)", rotation angle = 0
  Source counts = 460.4 +/- 31.5
  Background counts = 530.9
  Rate = 0.01 +/- 0.0008
[Wed May 29 10:59:43 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:43 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:59:43 2013] Source does appear to be extended
[Wed May 29 10:59:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:33 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Wed May 29 11:00:33 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed May 29 11:00:33 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 7.27"
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 29 11:00:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src13.csv
[Wed May 29 11:00:34 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 29 11:00:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src13.csv
[Wed May 29 11:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 29 11:00:35 2013] fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 29 11:00:35 2013] Fit fullrun_pn_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed May 29 11:00:57 2013] Warning, spatial fit 13 centroid is now closest to src. 55
[Wed May 29 11:00:57 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:57 2013] Assessing source extent using major axis lower bound
[Wed May 29 11:00:57 2013] Source does appear to be extended
[Wed May 29 11:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:01:47 2013] XMMSAS src. selection expression = ellipse(10524.693400, 30928.753000, 436.335013, 436.335013, 0.000000, X, Y)
[Wed May 29 11:01:47 2013] Not overwriting source region fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_src.reg
[Wed May 29 11:01:47 2013] Extracting stamp from image fullrun_pn_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (96, 331) - (147, 381)
[Wed May 29 11:01:47 2013] XMMSAS bgd. selection expression = annulus(10524.693400, 30928.753000, 727.225021, 1454.450042, X, Y)
[Wed May 29 11:01:47 2013] Writing fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16.gif
[Wed May 29 11:01:52 2013] ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0101440301/products/events/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Wed May 29 11:01:52 2013] Mean detx,y = (-16264.20, -4073.55) 
[Wed May 29 11:01:52 2013] ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_src.img and ../../xmm0101440301/products/images/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Wed May 29 11:01:52 2013] ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Wed May 29 11:01:52 2013] Setting source spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 29 11:01:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed May 29 11:01:52 2013] ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Wed May 29 19:59:35 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:35 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 587.00
[Wed May 29 19:59:35 2013] Total counts from fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_bgd.pi.gz = 831.00
[Wed May 29 19:59:35 2013] Got source and background scale factors 608000.000000, 4987200.000000
[Wed May 29 19:59:35 2013] User source parameters:
  Position = (121.5, 356.1) = 5 39 39.93 -2 33 14.8
  Extent = 7.3 (6.6-8.1)", rotation angle = 0
  Source aperture counts = 485.7 +/- 25.2
  Background aperture counts = 101.3
  Rate = 0.01 +/- 0.0006

[Wed May 29 19:59:49 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 19:59:49 2013] Using photon index=1.80, rate=0.0113, arf fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16.arf
[Wed May 29 19:59:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 19:59:49 2013] Updating source flux to 1.7e-13
[Wed May 29 20:01:10 2013] xmm0101440301/analysis//spectral/fullrun_pn_xmm0101440301_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete