[Wed May 29 10:58:22 2013] Detection parameters:
  Position = (463.2, 191.1) = 5 38 0.74 -2 45 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.2 +/- 13.9
  Background counts = 8.8
  Rate = 0.003 +/- 0.0003

[Wed May 29 10:58:22 2013] Off-axis axis estimate = 14.26'
[Wed May 29 10:59:19 2013] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 13.56"
[Wed May 29 10:59:19 2013] source mask rpix=3.1, npix_max = 52, mask sum = 46, frac = 0.879
[Wed May 29 10:59:19 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 13.56"
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src51.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src51.csv
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src51.csv
[Wed May 29 10:59:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed May 29 10:59:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:10 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 89 at 14.416892 pixels away
[Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:10 2013] Assessing source extent using major
[Wed May 29 11:00:10 2013] Source does appear to be extended
[Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:38 2013] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 13.56"
[Wed May 29 11:00:38 2013] source mask rpix=3.1, npix_max = 52, mask sum = 46, frac = 0.879
[Wed May 29 11:00:38 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 13.56"
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src50.ximg exists
[Wed May 29 11:00:39 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src50.csv
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src50_1.ximg exists
[Wed May 29 11:00:39 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src50.csv
[Wed May 29 11:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Wed May 29 11:00:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src50.csv
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Wed May 29 11:00:40 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src50.csv
[Wed May 29 11:00:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:24 2013] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 89 at 17.858331 pixels away
[Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:24 2013] Assessing source extent using major
[Wed May 29 11:01:24 2013] Source does appear to be extended
[Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:19 2013] XMMSAS src. selection expression = ellipse(40251.029449, 16575.793365, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_src.reg
[Wed May 29 19:58:19 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (426, 154) - (501, 229)
[Wed May 29 19:58:19 2013] XMMSAS bgd. selection expression = annulus(40251.029449, 16575.793365, 1087.500000, 2175.000000, X, Y)
[Wed May 29 19:58:19 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89.gif
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_bgd.evt exist, delete to re-create
[Wed May 29 19:58:21 2013] Mean detx,y = (-12815.13, -11265.79) 
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_bgd.img exist, delete to re-create
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_bgd.pi exist, delete to re-create
[Wed May 29 19:58:21 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Wed May 29 19:58:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_bgd.pi.gz
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_bgd.lc exist, delete to re-create
[Wed May 29 19:58:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89.arf exists, delete to re-create
[Wed May 29 20:00:10 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:10 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_src_b10.pi.gz = 174.00
[Wed May 29 20:00:10 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_bgd.pi.gz = 226.00
[Wed May 29 20:00:10 2013] Got source and background scale factors 834264.000000, 4639417.000000
[Wed May 29 20:00:10 2013] User source parameters:
  Position = (463.2, 191.1) = 5 38 0.74 -2 45 13.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 133.4 +/- 14.2
  Background aperture counts = 40.6
  Rate = 0.003 +/- 0.0003

[Wed May 29 20:00:10 2013] Updating counts from extracted products
[Wed May 29 20:00:10 2013] Set source signif. to 133.36/6.37 = 20.92
[Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.0031, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89.arf
[Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:15 2013] Updating source flux to 1.3e-13
[Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src89_pl.csv not found, spectral fit skipped or did not complete