[Wed May 29 10:58:21 2013] Detection parameters: Position = (309.4, 234.8) = 5 38 45.40 -2 42 0.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 535.9 +/- 27.1 Background counts = 12.6 Rate = 0.02 +/- 0.0009 [Wed May 29 10:58:22 2013] Off-axis axis estimate = 4.68' [Wed May 29 10:59:19 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting [Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 8.77" [Wed May 29 10:59:19 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987 [Wed May 29 10:59:19 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.77" [Wed May 29 10:59:19 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src17.ximg exists [Wed May 29 10:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src17.csv [Wed May 29 10:59:19 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src17_1.ximg exists [Wed May 29 10:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src17.csv [Wed May 29 10:59:19 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src17.csv [Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src17.csv [Wed May 29 10:59:21 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:00:10 2013] Spatial fit model total counts = 662.565000, observed total counts = 571.000000 [Wed May 29 11:00:10 2013] Poor agreement between spatial fit and data for source 79 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000 [Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 11:00:10 2013] Assessing source extent using major [Wed May 29 11:00:10 2013] Source does appear to be extended [Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 11:00:38 2013] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting [Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 8.77" [Wed May 29 11:00:38 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987 [Wed May 29 11:00:38 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.77" [Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src17.ximg exists [Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src17.csv [Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src17_1.ximg exists [Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src17.csv [Wed May 29 11:00:39 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src17.csv [Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src17.csv [Wed May 29 11:00:40 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:01:24 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 79 at 12.402528 pixels away [Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000 [Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 11:01:24 2013] Assessing source extent using major [Wed May 29 11:01:24 2013] Source does appear to be extended [Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 19:58:17 2013] XMMSAS src. selection expression = ellipse(26869.461426, 20380.648148, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 29 19:58:17 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_src.reg [Wed May 29 19:58:17 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (272, 197) - (347, 272) [Wed May 29 19:58:17 2013] XMMSAS bgd. selection expression = annulus(26869.461426, 20380.648148, 1087.500000, 2175.000000, X, Y) && !ellipse(27176.016418, 22415.984314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24546.641000, 18169.974200, 480.342414, 480.342414, 0.000000, X, Y) && !ellipse(27816.484200, 18871.927400, 465.656054, 465.656054, 0.000000, X, Y) && !ellipse(25536.742920, 21198.329468, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 29 19:58:17 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79.gif [Wed May 29 19:58:21 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_bgd.evt exist, delete to re-create [Wed May 29 19:58:21 2013] Mean detx,y = (391.34, -7185.47) [Wed May 29 19:58:21 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_bgd.img exist, delete to re-create [Wed May 29 19:58:21 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_bgd.pi exist, delete to re-create [Wed May 29 19:58:21 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_src_b10.pi.gz [Wed May 29 19:58:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_bgd.pi.gz [Wed May 29 19:58:21 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_bgd.lc exist, delete to re-create [Wed May 29 19:58:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts [Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79.arf exists, delete to re-create [Wed May 29 20:00:05 2013] Updating aperture counts using extracted products [Wed May 29 20:00:05 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_src_b10.pi.gz = 533.00 [Wed May 29 20:00:05 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_bgd.pi.gz = 451.00 [Wed May 29 20:00:05 2013] Got source and background scale factors 942420.000000, 6632140.000000 [Wed May 29 20:00:05 2013] User source parameters: Position = (309.4, 234.8) = 5 38 45.40 -2 42 0.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 468.9 +/- 24.1 Background aperture counts = 64.1 Rate = 0.01 +/- 0.0006 [Wed May 29 20:00:05 2013] Updating counts from extracted products [Wed May 29 20:00:05 2013] Set source signif. to 468.91/8.01 = 58.57 [Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79.arf [Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 20:00:15 2013] Updating source flux to 2e-13 [Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src79_pl.csv not found, spectral fit skipped or did not complete