[Wed May 29 10:58:21 2013] Detection parameters:
  Position = (412.1, 232.9) = 5 38 15.59 -2 42 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 10.0
  Background counts = 10.5
  Rate = 0.002 +/- 0.0004

[Wed May 29 10:58:22 2013] Off-axis axis estimate = 9.51'
[Wed May 29 10:59:19 2013] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 11.18"
[Wed May 29 10:59:19 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Wed May 29 10:59:19 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 11.18"
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src61.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src61.csv
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src61_1.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src61.csv
[Wed May 29 10:59:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61.csv
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61.csv
[Wed May 29 10:59:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:10 2013] Spatial fit model total counts = 158.956000, observed total counts = 143.000000
[Wed May 29 11:00:10 2013] Poor agreement between spatial fit and data for source 77
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:10 2013] Assessing source extent using major
[Wed May 29 11:00:10 2013] Source does appear to be extended
[Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:38 2013] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 11.18"
[Wed May 29 11:00:38 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Wed May 29 11:00:38 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 11.18"
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src59.ximg exists
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed May 29 11:00:39 2013] Fit fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src59 appears to have run properly
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed May 29 11:00:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:24 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 11.730895 pixels away
[Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:24 2013] Assessing source extent using major
[Wed May 29 11:01:24 2013] Source does appear to be extended
[Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:19 2013] XMMSAS src. selection expression = ellipse(35800.040100, 20209.960297, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_src.reg
[Wed May 29 19:58:19 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (375, 195) - (450, 270)
[Wed May 29 19:58:19 2013] XMMSAS bgd. selection expression = annulus(35800.040100, 20209.960297, 1087.500000, 2175.000000, X, Y)
[Wed May 29 19:58:19 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77.gif
[Wed May 29 19:58:22 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_bgd.evt exist, delete to re-create
[Wed May 29 19:58:22 2013] Mean detx,y = (-8551.05, -7621.80) 
[Wed May 29 19:58:22 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_bgd.img exist, delete to re-create
[Wed May 29 19:58:22 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_bgd.pi exist, delete to re-create
[Wed May 29 19:58:22 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Wed May 29 19:58:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Wed May 29 19:58:22 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_bgd.lc exist, delete to re-create
[Wed May 29 19:58:31 2013] Not generating rmf since there are only 53 counts
[Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77.arf exists, delete to re-create
[Wed May 29 20:00:11 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:11 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_src_b10.pi.gz = 105.00
[Wed May 29 20:00:11 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_bgd.pi.gz = 606.00
[Wed May 29 20:00:11 2013] Got source and background scale factors 1345076.000000, 10491361.000000
[Wed May 29 20:00:11 2013] User source parameters:
  Position = (412.1, 232.9) = 5 38 15.59 -2 42 11.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.3 +/- 11.3
  Background aperture counts = 77.7
  Rate = 0.0006 +/- 0.0003

[Wed May 29 20:00:11 2013] Updating counts from extracted products
[Wed May 29 20:00:11 2013] Set source signif. to 27.31/8.81 = 3.10
[Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.000634, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77.arf
[Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:15 2013] Updating source flux to 1.5e-14
[Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src77_pl.csv not found, spectral fit skipped or did not complete