[Wed May 29 10:58:21 2013] Detection parameters:
  Position = (294.1, 244.2) = 5 38 49.84 -2 41 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.2 +/- 13.5
  Background counts = 12.2
  Rate = 0.004 +/- 0.0004

[Wed May 29 10:58:22 2013] Off-axis axis estimate = 3.94'
[Wed May 29 10:59:19 2013] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 8.40"
[Wed May 29 10:59:19 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.888
[Wed May 29 10:59:19 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 8.40"
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src47.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src47.csv
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src47_1.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src47.csv
[Wed May 29 10:59:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src47.csv
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src47.csv
[Wed May 29 10:59:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:10 2013] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 13.703403 pixels away
[Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:10 2013] Assessing source extent using major
[Wed May 29 11:00:10 2013] Source does appear to be extended
[Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:38 2013] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 8.40"
[Wed May 29 11:00:38 2013] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.888
[Wed May 29 11:00:38 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 8.40"
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src46.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src46.csv
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src46_1.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src46.csv
[Wed May 29 11:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Wed May 29 11:00:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:24 2013] Spatial fit model total counts = 231.700000, observed total counts = 195.000000
[Wed May 29 11:01:24 2013] Poor agreement between spatial fit and data for source 75
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:24 2013] Assessing source extent using major
[Wed May 29 11:01:24 2013] Source does appear to be extended
[Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:19 2013] XMMSAS src. selection expression = ellipse(25536.742920, 21198.329468, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_src.reg
[Wed May 29 19:58:19 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (257, 207) - (332, 282)
[Wed May 29 19:58:19 2013] XMMSAS bgd. selection expression = annulus(25536.742920, 21198.329468, 1087.500000, 2175.000000, X, Y) && !ellipse(27176.016418, 22415.984314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26869.461426, 20380.648148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27816.484200, 18871.927400, 465.656054, 465.656054, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75.gif
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_bgd.evt exist, delete to re-create
[Wed May 29 19:58:21 2013] Mean detx,y = (1648.67, -6300.31) 
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_bgd.img exist, delete to re-create
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_bgd.pi exist, delete to re-create
[Wed May 29 19:58:21 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Wed May 29 19:58:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_bgd.lc exist, delete to re-create
[Wed May 29 19:58:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75.arf exists, delete to re-create
[Wed May 29 20:00:09 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:09 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_src_b10.pi.gz = 162.00
[Wed May 29 20:00:09 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_bgd.pi.gz = 487.00
[Wed May 29 20:00:09 2013] Got source and background scale factors 1025632.000000, 7519575.000000
[Wed May 29 20:00:09 2013] User source parameters:
  Position = (294.1, 244.2) = 5 38 49.84 -2 41 24.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 95.6 +/- 13.8
  Background aperture counts = 66.4
  Rate = 0.002 +/- 0.0003

[Wed May 29 20:00:09 2013] Updating counts from extracted products
[Wed May 29 20:00:09 2013] Set source signif. to 95.58/8.15 = 11.73
[Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.00222, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75.arf
[Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:15 2013] Updating source flux to 4.1e-14
[Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src75_pl.csv not found, spectral fit skipped or did not complete