[Wed May 29 10:58:19 2013] Detection parameters:
  Position = (342.1, 389.4) = 5 38 35.89 -2 30 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2956.9 +/- 63.5
  Background counts = 15.5
  Rate = 0.1 +/- 0.003

[Wed May 29 10:58:22 2013] Off-axis axis estimate = 7.32'
[Wed May 29 10:59:19 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Wed May 29 10:59:19 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.944
[Wed May 29 10:59:19 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.09"
[Wed May 29 10:59:19 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 29 10:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src3.csv
[Wed May 29 10:59:19 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 29 10:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src3.csv
[Wed May 29 10:59:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed May 29 10:59:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:10 2013] Warning, spatial fit 3 centroid is now closest to src. 31
[Wed May 29 11:00:10 2013] Source 6 is offset by 6.783877 and 0.776853 pixels which is larger than
2 X fitted extent = 1.169729 x 1.169729, not incorporating fit results
[Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:10 2013] Assessing source extent using major
[Wed May 29 11:00:10 2013] Source does appear to be extended
[Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:38 2013] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Wed May 29 11:00:38 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.944
[Wed May 29 11:00:38 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.09"
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src3.csv
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src3.csv
[Wed May 29 11:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 29 11:00:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:24 2013] Spatial fit model total counts = 4161.760000, observed total counts = 2735.000000
[Wed May 29 11:01:24 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 11:01:24 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.741705 pixels away
[Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:24 2013] Assessing source extent using major
[Wed May 29 11:01:24 2013] Source does appear to be extended
[Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:17 2013] Counts = 2956.941650, rescaling region sizes by 2.000000
[Wed May 29 19:58:17 2013] XMMSAS src. selection expression = ellipse(29717.827301, 33830.956207, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May 29 19:58:17 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_src.reg
[Wed May 29 19:58:17 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (267, 314) - (417, 464)
[Wed May 29 19:58:17 2013] XMMSAS bgd. selection expression = annulus(29717.827301, 33830.956207, 4350.000000, 8700.000000, X, Y) && !ellipse(27039.168243, 27619.300110, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26313.415985, 28035.359131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28906.995447, 28916.228077, 458.572989, 386.498577, 17.678714, X, Y) && !ellipse(28069.068680, 25973.599000, 399.090411, 399.090411, 0.000000, X, Y) && !ellipse(24448.148600, 30770.286200, 393.031211, 393.031211, 0.000000, X, Y) && !ellipse(27200.671021, 31763.753052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26064.976929, 38139.065155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28990.771740, 26848.258000, 394.842411, 394.842411, 0.000000, X, Y) && !ellipse(29906.005157, 29264.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38098.275600, 32983.033800, 449.144013, 449.144013, 0.000000, X, Y) && !ellipse(27441.867157, 30674.306915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25708.513500, 24783.674800, 416.108812, 416.108812, 0.000000, X, Y) && !ellipse(30657.112000, 28235.154000, 1374.688040, 1374.688040, 0.000000, X, Y) && !ellipse(29842.401276, 32579.388672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25862.764587, 27338.289154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24993.615000, 27351.379980, 702.796020, 702.796020, 0.000000, X, Y) && !ellipse(28385.760697, 34502.879044, 971.379281, 325.083678, 1.522482, X, Y) && !ellipse(20860.107800, 31831.858000, 517.487215, 517.487215, 0.000000, X, Y) && !ellipse(21648.934800, 34925.410600, 502.723214, 310.871209, 352.427783, X, Y) && !ellipse(30187.427643, 28866.003632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30987.414520, 28493.972961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38578.977039, 34196.291823, 462.231406, 290.705072, 0.000000, X, Y) && !ellipse(31439.368075, 42463.991313, 637.131607, 309.986504, 0.000000, X, Y) && !ellipse(32524.047600, 29448.994200, 443.301613, 443.301613, 0.000000, X, Y) && !ellipse(36279.928680, 28769.928741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28051.029114, 26775.622070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32616.131200, 35829.326800, 434.756013, 434.756013, 0.000000, X, Y) && !ellipse(25530.728000, 25712.200000, 458.271213, 458.271213, 0.000000, X, Y) && !ellipse(37987.691660, 27680.650400, 412.818412, 412.818412, 0.000000, X, Y) && !ellipse(31020.346000, 27530.010000, 2732.528079, 2732.528079, 0.000000, X, Y) && !ellipse(33759.177490, 36173.846985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22125.150046, 30482.569791, 398.497701, 255.869546, 130.707419, X, Y) && !ellipse(34406.984200, 25183.017840, 506.634415, 221.670406, 36.881000, X, Y) && !ellipse(33915.033020, 41512.141815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27969.280762, 36880.299835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31567.490000, 29092.618000, 1407.888041, 1407.888041, 0.000000, X, Y) && !ellipse(33187.016022, 26187.652557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38346.510559, 34690.681244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32861.082400, 28086.728400, 551.874416, 551.874416, 0.000000, X, Y) && !ellipse(25196.277893, 37628.625153, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 19:58:17 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6.gif
[Wed May 29 19:58:20 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed May 29 19:58:20 2013] Mean detx,y = (-2789.76, 6146.06) 
[Wed May 29 19:58:20 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed May 29 19:58:20 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed May 29 19:58:20 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 29 19:58:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May 29 19:58:20 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed May 29 19:58:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Wed May 29 20:00:03 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:03 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 3434.00
[Wed May 29 20:00:03 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 7855.00
[Wed May 29 20:00:03 2013] Got source and background scale factors 4511371.000000, 122838276.000000
[Wed May 29 20:00:03 2013] User source parameters:
  Position = (342.1, 389.4) = 5 38 35.89 -2 30 43.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3145.5 +/- 59.6
  Background aperture counts = 288.5
  Rate = 0.07 +/- 0.001

[Wed May 29 20:00:03 2013] Updating counts from extracted products
[Wed May 29 20:00:03 2013] Set source signif. to 3145.52/16.98 = 185.20
[Wed May 29 20:00:14 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:14 2013] Using photon index=1.80, rate=0.0731, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6.arf
[Wed May 29 20:00:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:14 2013] Updating source flux to 1.4e-12
[Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete