[Wed May 29 10:58:21 2013] Detection parameters:
  Position = (297.8, 314.8) = 5 38 48.75 -2 36 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 516.1 +/- 30.3
  Background counts = 18.9
  Rate = 0.01 +/- 0.0007

[Wed May 29 10:58:22 2013] Off-axis axis estimate = 1.19'
[Wed May 29 10:59:19 2013] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 7.02"
[Wed May 29 10:59:19 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Wed May 29 10:59:19 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 7.02"
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src22.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src22.csv
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src22.csv
[Wed May 29 10:59:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed May 29 10:59:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:10 2013] Warning, spatial fit 22 centroid is now closest to src. 3
[Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:10 2013] Assessing source extent using major
[Wed May 29 11:00:10 2013] Source does appear to be extended
[Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:38 2013] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 7.02"
[Wed May 29 11:00:38 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Wed May 29 11:00:38 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 7.02"
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src22.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src22.csv
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src22.csv
[Wed May 29 11:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed May 29 11:00:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:24 2013] Source 59 is offset by 7.208444 and 3.403462 pixels which is larger than
2 X fitted extent = 6.456828 x 6.456828, not incorporating fit results
[Wed May 29 11:01:24 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 15.100690 pixels away
[Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:24 2013] Assessing source extent using major
[Wed May 29 11:01:24 2013] Source does appear to be extended
[Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:18 2013] XMMSAS src. selection expression = ellipse(25862.764587, 27338.289154, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:18 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_src.reg
[Wed May 29 19:58:18 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (260, 277) - (335, 352)
[Wed May 29 19:58:18 2013] XMMSAS bgd. selection expression = annulus(25862.764587, 27338.289154, 1087.500000, 2175.000000, X, Y) && !ellipse(27039.168243, 27619.300110, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26313.415985, 28035.359131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28069.068680, 25973.599000, 399.090411, 399.090411, 0.000000, X, Y) && !ellipse(25708.513500, 24783.674800, 416.108812, 416.108812, 0.000000, X, Y) && !ellipse(24993.615000, 27351.379980, 702.796020, 702.796020, 0.000000, X, Y) && !ellipse(28051.029114, 26775.622070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.728000, 25712.200000, 458.271213, 458.271213, 0.000000, X, Y)
[Wed May 29 19:58:18 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59.gif
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_bgd.evt exist, delete to re-create
[Wed May 29 19:58:21 2013] Mean detx,y = (1082.79, -75.75) 
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_bgd.img exist, delete to re-create
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_bgd.pi exist, delete to re-create
[Wed May 29 19:58:21 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Wed May 29 19:58:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_bgd.lc exist, delete to re-create
[Wed May 29 19:58:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59.arf exists, delete to re-create
[Wed May 29 20:00:06 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:06 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 1563.00
[Wed May 29 20:00:06 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_bgd.pi.gz = 258.00
[Wed May 29 20:00:06 2013] Got source and background scale factors 1332720.000000, 2555832.000000
[Wed May 29 20:00:06 2013] User source parameters:
  Position = (297.8, 314.8) = 5 38 48.75 -2 36 15.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1428.5 +/- 40.5
  Background aperture counts = 134.5
  Rate = 0.03 +/- 0.0009

[Wed May 29 20:00:06 2013] Updating counts from extracted products
[Wed May 29 20:00:06 2013] Set source signif. to 1428.47/11.60 = 123.16
[Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.0332, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59.arf
[Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:15 2013] Updating source flux to 4.7e-13
[Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete