[Wed May 29 10:58:21 2013] Detection parameters:
  Position = (323.0, 308.3) = 5 38 41.45 -2 36 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.7 +/- 17.8
  Background counts = 20.4
  Rate = 0.003 +/- 0.0004

[Wed May 29 10:58:22 2013] Off-axis axis estimate = 1.92'
[Wed May 29 10:59:19 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Wed May 29 10:59:19 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Wed May 29 10:59:19 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 7.39"
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src53.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src53.csv
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src53.csv
[Wed May 29 10:59:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src53.csv
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src53.csv
[Wed May 29 10:59:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:10 2013] Source 58 is offset by 5.289783 and -3.983447 pixels which is larger than
2 X fitted extent = 0.836662 x 0.836662, not incorporating fit results
[Wed May 29 11:00:10 2013] Warning, spatial fit 53 centroid is now closest to src. 1
[Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:10 2013] Assessing source extent using major
[Wed May 29 11:00:10 2013] Source does appear to be extended
[Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:38 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Wed May 29 11:00:38 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828
[Wed May 29 11:00:38 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 7.39"
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src52.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src52.csv
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src52_1.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src52.csv
[Wed May 29 11:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src52.csv
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src52.csv
[Wed May 29 11:00:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:24 2013] Source 58 is offset by 5.289783 and -3.983447 pixels which is larger than
2 X fitted extent = 0.836662 x 0.836662, not incorporating fit results
[Wed May 29 11:01:24 2013] Warning, spatial fit 52 centroid is now closest to src. 1
[Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:24 2013] Assessing source extent using major
[Wed May 29 11:01:24 2013] Source does appear to be extended
[Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:19 2013] XMMSAS src. selection expression = ellipse(28051.029114, 26775.622070, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_src.reg
[Wed May 29 19:58:19 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (285, 271) - (360, 346)
[Wed May 29 19:58:19 2013] XMMSAS bgd. selection expression = annulus(28051.029114, 26775.622070, 1087.500000, 2175.000000, X, Y) && !ellipse(27039.168243, 27619.300110, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26313.415985, 28035.359131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28906.995447, 28916.228077, 458.572989, 386.498577, 17.678714, X, Y) && !ellipse(28069.068680, 25973.599000, 399.090411, 399.090411, 0.000000, X, Y) && !ellipse(28990.771740, 26848.258000, 394.842411, 394.842411, 0.000000, X, Y) && !ellipse(29906.005157, 29264.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25708.513500, 24783.674800, 416.108812, 416.108812, 0.000000, X, Y) && !ellipse(30657.112000, 28235.154000, 1374.688040, 1374.688040, 0.000000, X, Y) && !ellipse(25862.764587, 27338.289154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30187.427643, 28866.003632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30987.414520, 28493.972961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.728000, 25712.200000, 458.271213, 458.271213, 0.000000, X, Y) && !ellipse(31020.346000, 27530.010000, 2732.528079, 2732.528079, 0.000000, X, Y) && !ellipse(31567.490000, 29092.618000, 1407.888041, 1407.888041, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58.gif
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_bgd.evt exist, delete to re-create
[Wed May 29 19:58:22 2013] Mean detx,y = (-981.58, -1009.84) 
[Wed May 29 19:58:22 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_bgd.img exist, delete to re-create
[Wed May 29 19:58:22 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_bgd.pi exist, delete to re-create
[Wed May 29 19:58:22 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Wed May 29 19:58:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Wed May 29 19:58:22 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_bgd.lc exist, delete to re-create
[Wed May 29 19:58:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58.arf exists, delete to re-create
[Wed May 29 20:00:10 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:10 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 866.00
[Wed May 29 20:00:10 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_bgd.pi.gz = 194.00
[Wed May 29 20:00:10 2013] Got source and background scale factors 1121884.000000, 1382028.000000
[Wed May 29 20:00:10 2013] User source parameters:
  Position = (323.0, 308.3) = 5 38 41.45 -2 36 45.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 708.5 +/- 30.4
  Background aperture counts = 157.5
  Rate = 0.02 +/- 0.0007

[Wed May 29 20:00:10 2013] Updating counts from extracted products
[Wed May 29 20:00:10 2013] Set source signif. to 708.52/12.55 = 56.46
[Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.0165, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58.arf
[Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:15 2013] Updating source flux to 2.1e-13
[Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete