[Wed May 29 10:58:20 2013] Detection parameters: Position = (365.2, 317.3) = 5 38 29.19 -2 36 3.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 386.1 +/- 24.6 Background counts = 17.1 Rate = 0.01 +/- 0.0007 [Wed May 29 10:58:22 2013] Off-axis axis estimate = 5.03' [Wed May 29 10:59:19 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting [Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 8.94" [Wed May 29 10:59:19 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.957 [Wed May 29 10:59:19 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 8.94" [Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src23.ximg exists [Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src23.csv [Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src23_1.ximg exists [Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src23.csv [Wed May 29 10:59:20 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Wed May 29 10:59:21 2013] Fit fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly [Wed May 29 11:00:10 2013] Spatial fit model total counts = 968.315000, observed total counts = 951.000000 [Wed May 29 11:00:10 2013] Offset between fit and detection position for source 53 = 5.453007 pixels [Wed May 29 11:00:10 2013] Warning, changing simple spatial fit ID from 23 to 19 [Wed May 29 11:00:10 2013] 1006.640025 total counts/ 1006.640000 bgd. counts: snr = 0.000001 Spatial fit parameters: Offset between fit and detection position for source 53 = 5.453007 pixels Position = (359.9, 316.1) = 5 38 30.74 -2 36 8.6 Extent = 17.2 (17.1-34.3)", rotation angle = 0 Source counts = 0.0 +/- 31.7 Background counts = 1006.6 Rate = 6e-10 +/- 0.0007 Deleting source due to low Poisson probability