[Wed May 29 10:58:20 2013] Detection parameters: Position = (437.4, 319.0) = 5 38 8.25 -2 35 56.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 62.6 +/- 10.6 Background counts = 10.4 Rate = 0.003 +/- 0.0004 [Wed May 29 10:58:22 2013] Off-axis axis estimate = 10.18' [Wed May 29 10:59:19 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting [Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 11.52" [Wed May 29 10:59:19 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.059 [Wed May 29 10:59:19 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 11.52" [Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src59.ximg exists [Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src59_1.ximg exists [Wed May 29 10:59:20 2013] Fit fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src59 appears to have run properly [Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src59.ximg exists [Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src59.csv [Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists [Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src59.csv [Wed May 29 10:59:21 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src59_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:00:10 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 17.401789 pixels away [Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000 [Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 11:00:10 2013] Assessing source extent using major [Wed May 29 11:00:10 2013] Source does appear to be extended [Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 11:00:38 2013] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting [Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 11.52" [Wed May 29 11:00:38 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.059 [Wed May 29 11:00:38 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 11.52" [Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src57.ximg exists [Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src57.csv [Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src57_1.ximg exists [Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src57.csv [Wed May 29 11:00:39 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src57_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src57.ximg exists [Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists [Wed May 29 11:00:40 2013] Fit fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly [Wed May 29 11:01:24 2013] Spatial fit model total counts = 151.843000, observed total counts = 146.000000 [Wed May 29 11:01:24 2013] Offset between fit and detection position for source 52 = 0.281396 pixels [Wed May 29 11:01:24 2013] 154.522400 total counts/ 113.287000 bgd. counts: snr = 3.874183 Spatial fit parameters: Offset between fit and detection position for source 52 = 0.281396 pixels Position = (437.2, 318.7) = 5 38 8.30 -2 35 57.2 Extent = 5.2 (3.9-7.4)", rotation angle = 0 Source counts = 41.2 +/- 12.4 Background counts = 113.3 Rate = 0.001 +/- 0.0003 [Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000 [Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 11:01:24 2013] Assessing source extent using major axis lower bound [Wed May 29 11:01:24 2013] Source does appear to be extended [Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 19:58:19 2013] XMMSAS src. selection expression = ellipse(37987.691660, 27680.650400, 309.613809, 309.613809, 0.000000, X, Y) [Wed May 29 19:58:19 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_src.reg [Wed May 29 19:58:19 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (419, 301) - (455, 337) [Wed May 29 19:58:19 2013] XMMSAS bgd. selection expression = annulus(37987.691660, 27680.650400, 516.023015, 1032.046030, X, Y) && !ellipse(36279.928680, 28769.928741, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 29 19:58:19 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52.gif [Wed May 29 19:58:22 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.evt exist, delete to re-create [Wed May 29 19:58:22 2013] Mean detx,y = (-10920.98, -184.56) [Wed May 29 19:58:22 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.img exist, delete to re-create [Wed May 29 19:58:22 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.pi exist, delete to re-create [Wed May 29 19:58:22 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_src_b10.pi.gz [Wed May 29 19:58:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.pi.gz [Wed May 29 19:58:22 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.lc exist, delete to re-create [Wed May 29 19:58:31 2013] Not generating rmf since there are only 41 counts [Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts [Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52.arf exists, delete to re-create [Wed May 29 20:00:11 2013] Updating aperture counts using extracted products [Wed May 29 20:00:11 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 57.00 [Wed May 29 20:00:11 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_bgd.pi.gz = 129.00 [Wed May 29 20:00:11 2013] Got source and background scale factors 304000.000000, 2279868.000000 [Wed May 29 20:00:11 2013] User source parameters: Position = (437.2, 318.7) = 5 38 8.30 -2 35 57.2 Extent = 5.2 (3.9-7.4)", rotation angle = 0 Source aperture counts = 39.8 +/- 8.6 Background aperture counts = 17.2 Rate = 0.0009 +/- 0.0002 [Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.000958, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52.arf [Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 20:00:15 2013] Updating source flux to 2.8e-14 [Wed May 29 20:00:38 2013] Source 52 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete