[Wed May 29 10:58:20 2013] Detection parameters:
  Position = (356.7, 328.1) = 5 38 31.66 -2 35 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.6 +/- 16.6
  Background counts = 16.8
  Rate = 0.004 +/- 0.0005

[Wed May 29 10:58:22 2013] Off-axis axis estimate = 4.74'
[Wed May 29 10:59:19 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Wed May 29 10:59:19 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Wed May 29 10:59:19 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 8.80"
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src44.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src44.csv
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src44_1.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src44.csv
[Wed May 29 10:59:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Wed May 29 10:59:21 2013] Fit fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Wed May 29 11:00:10 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 13.551828 pixels away
[Wed May 29 11:00:10 2013] Source 47 is offset by 4.351293 and 5.169092 pixels which is larger than
2 X fitted extent = 1.811899 x 1.811899, not incorporating fit results
[Wed May 29 11:00:10 2013] Source 47 is offset by 4.083454 and 5.346977 pixels which is larger than
2 X fitted extent = 1.990662 x 1.990662, not incorporating fit results
[Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:10 2013] Assessing source extent using major
[Wed May 29 11:00:10 2013] Source does appear to be extended
[Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:10 2013] Source is confused with source 51
[Wed May 29 11:00:38 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Wed May 29 11:00:38 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.982
[Wed May 29 11:00:38 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 8.80"
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src43.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src43.csv
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src43_1.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src43.csv
[Wed May 29 11:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Wed May 29 11:00:40 2013] Fit fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Wed May 29 11:01:24 2013] Warning, spatial fit 43 centroid is now closest to src. 46
[Wed May 29 11:01:24 2013] Source 47 is offset by 4.085592 and 5.346977 pixels which is larger than
2 X fitted extent = 1.985044 x 1.985044, not incorporating fit results
[Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:24 2013] Assessing source extent using major
[Wed May 29 11:01:24 2013] Source does appear to be extended
[Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:18 2013] XMMSAS src. selection expression = ellipse(30987.414520, 28493.972961, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:18 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_src.reg
[Wed May 29 19:58:18 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (319, 291) - (394, 366)
[Wed May 29 19:58:19 2013] XMMSAS bgd. selection expression = annulus(30987.414520, 28493.972961, 1087.500000, 2175.000000, X, Y) && !ellipse(27039.168243, 27619.300110, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28906.995447, 28916.228077, 458.572989, 386.498577, 17.678714, X, Y) && !ellipse(28990.771740, 26848.258000, 394.842411, 394.842411, 0.000000, X, Y) && !ellipse(29906.005157, 29264.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30657.112000, 28235.154000, 1374.688040, 1374.688040, 0.000000, X, Y) && !ellipse(30187.427643, 28866.003632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32524.047600, 29448.994200, 443.301613, 443.301613, 0.000000, X, Y) && !ellipse(28051.029114, 26775.622070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31020.346000, 27530.010000, 2732.528079, 2732.528079, 0.000000, X, Y) && !ellipse(31567.490000, 29092.618000, 1407.888041, 1407.888041, 0.000000, X, Y) && !ellipse(33187.016022, 26187.652557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32861.082400, 28086.728400, 551.874416, 551.874416, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47.gif
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create
[Wed May 29 19:58:21 2013] Mean detx,y = (-3741.80, 624.59) 
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create
[Wed May 29 19:58:21 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Wed May 29 19:58:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create
[Wed May 29 19:58:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47.arf exists, delete to re-create
[Wed May 29 20:00:09 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:09 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 635.00
[Wed May 29 20:00:09 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_bgd.pi.gz = 59.00
[Wed May 29 20:00:09 2013] Got source and background scale factors 1256920.000000, 570476.000000
[Wed May 29 20:00:09 2013] User source parameters:
  Position = (356.7, 328.1) = 5 38 31.66 -2 35 15.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 505.0 +/- 26.2
  Background aperture counts = 130.0
  Rate = 0.01 +/- 0.0006

[Wed May 29 20:00:09 2013] Updating counts from extracted products
[Wed May 29 20:00:09 2013] Set source signif. to 505.01/11.40 = 44.29
[Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.0117, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47.arf
[Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:15 2013] Updating source flux to 1.9e-13
[Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete