[Wed May 29 10:58:20 2013] Detection parameters:
  Position = (417.6, 331.2) = 5 38 14.00 -2 35 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.8 +/- 10.9
  Background counts = 10.5
  Rate = 0.003 +/- 0.0005

[Wed May 29 10:58:22 2013] Off-axis axis estimate = 8.96'
[Wed May 29 10:59:19 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:19 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Wed May 29 10:59:19 2013] source mask rpix=2.5, npix_max = 36, mask sum = 24, frac = 0.663
[Wed May 29 10:59:19 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 10.91"
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src52.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src52.csv
[Wed May 29 10:59:20 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src52_1.ximg exists
[Wed May 29 10:59:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src52.csv
[Wed May 29 10:59:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src52.csv
[Wed May 29 10:59:21 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Wed May 29 10:59:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src52.csv
[Wed May 29 10:59:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:10 2013] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 13.348519 pixels away
[Wed May 29 11:00:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:00:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:00:10 2013] Assessing source extent using major
[Wed May 29 11:00:10 2013] Source does appear to be extended
[Wed May 29 11:00:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:38 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:38 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Wed May 29 11:00:38 2013] source mask rpix=2.5, npix_max = 36, mask sum = 24, frac = 0.663
[Wed May 29 11:00:38 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 10.91"
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src51.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src51.csv
[Wed May 29 11:00:39 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src51_1.ximg exists
[Wed May 29 11:00:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src51.csv
[Wed May 29 11:00:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src51.csv
[Wed May 29 11:00:40 2013] fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Wed May 29 11:00:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src51.csv
[Wed May 29 11:00:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:24 2013] Spatial fit model total counts = 195.088000, observed total counts = 162.000000
[Wed May 29 11:01:24 2013] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 11:01:24 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:24 2013] Assessing source extent using major
[Wed May 29 11:01:24 2013] Source does appear to be extended
[Wed May 29 11:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:19 2013] XMMSAS src. selection expression = ellipse(36279.928680, 28769.928741, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Not overwriting source region fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_src.reg
[Wed May 29 19:58:19 2013] Extracting stamp from image fullrun_mos2_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (380, 294) - (455, 369)
[Wed May 29 19:58:19 2013] XMMSAS bgd. selection expression = annulus(36279.928680, 28769.928741, 1087.500000, 2175.000000, X, Y) && !ellipse(37987.691660, 27680.650400, 412.818412, 412.818412, 0.000000, X, Y)
[Wed May 29 19:58:19 2013] Writing fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45.gif
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0101440301/products/events/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Wed May 29 19:58:21 2013] Mean detx,y = (-9266.32, 923.13) 
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_src.img and ../../xmm0101440301/products/images/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Wed May 29 19:58:21 2013] Setting source spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Wed May 29 19:58:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Wed May 29 19:58:21 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Wed May 29 19:58:31 2013] Not generating rmf since there are only 73 counts
[Wed May 29 19:58:31 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:31 2013] fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45.arf exists, delete to re-create
[Wed May 29 20:00:10 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:10 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 142.00
[Wed May 29 20:00:10 2013] Total counts from fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_bgd.pi.gz = 623.00
[Wed May 29 20:00:10 2013] Got source and background scale factors 1127168.000000, 10170328.000000
[Wed May 29 20:00:10 2013] User source parameters:
  Position = (417.6, 331.2) = 5 38 14.00 -2 35 9.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 73.0 +/- 12.9
  Background aperture counts = 69.0
  Rate = 0.002 +/- 0.0003

[Wed May 29 20:00:10 2013] Updating counts from extracted products
[Wed May 29 20:00:10 2013] Set source signif. to 72.95/8.31 = 8.78
[Wed May 29 20:00:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:15 2013] Using photon index=1.80, rate=0.0017, arf fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45.arf
[Wed May 29 20:00:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:15 2013] Updating source flux to 3.7e-14
[Wed May 29 20:00:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:54 2013] xmm0101440301/analysis//spectral/fullrun_mos2_xmm0101440301_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete