[Wed May 29 10:58:18 2013] Detection parameters:
  Position = (320.1, 217.9) = 5 38 42.29 -2 43 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.4 +/- 15.0
  Background counts = 11.1
  Rate = 0.005 +/- 0.0005

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 6.04'
[Wed May 29 10:59:15 2013] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 9.45"
[Wed May 29 10:59:15 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.260
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 9.45"
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src39.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src39.csv
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src39.csv
[Wed May 29 10:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed May 29 10:59:18 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed May 29 10:59:54 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 12.778300 pixels away
[Wed May 29 10:59:54 2013] Spatial fit model total counts = 238.000000, observed total counts = 238.000000
[Wed May 29 10:59:54 2013] Offset between fit and detection position for source 73 = 0.052384 pixels
[Wed May 29 10:59:54 2013] 232.913700 total counts/ 144.182000 bgd. counts: snr = 7.389640
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.052384 pixels
  Position = (320.1, 217.9) = 5 38 42.28 -2 43 15.8
  Extent = 4.8 (3.8-5.7)", rotation angle = 0
  Source counts = 88.7 +/- 15.3
  Background counts = 144.2
  Rate = 0.002 +/- 0.0004
[Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:54 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:59:54 2013] Source does appear to be extended
[Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:35 2013] Initial guess for spatial extent in simple fitting = 4.75"
[Wed May 29 11:00:35 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.888
[Wed May 29 11:00:35 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 4.75"
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src37.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src37.csv
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src37.csv
[Wed May 29 11:00:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed May 29 11:00:38 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Wed May 29 11:01:10 2013] Spatial fit model total counts = 238.000000, observed total counts = 238.000000
[Wed May 29 11:01:10 2013] Offset between fit and detection position for source 73 = 0.000144 pixels
[Wed May 29 11:01:10 2013] 232.915800 total counts/ 144.148000 bgd. counts: snr = 7.393518
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.000144 pixels
  Position = (320.1, 217.9) = 5 38 42.28 -2 43 15.8
  Extent = 4.8 (3.8-5.7)", rotation angle = 0
  Source counts = 88.8 +/- 15.3
  Background counts = 144.1
  Rate = 0.002 +/- 0.0004
[Wed May 29 11:01:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:10 2013] Assessing source extent using major axis lower bound
[Wed May 29 11:01:10 2013] Source does appear to be extended
[Wed May 29 11:01:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:06 2013] XMMSAS src. selection expression = ellipse(27801.908900, 18908.606000, 285.318008, 285.318008, 0.000000, X, Y)
[Wed May 29 19:58:06 2013] Not overwriting source region fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_src.reg
[Wed May 29 19:58:06 2013] Extracting stamp from image fullrun_mos1_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (304, 202) - (337, 234)
[Wed May 29 19:58:06 2013] XMMSAS bgd. selection expression = annulus(27801.908900, 18908.606000, 475.530014, 951.060027, X, Y) && !ellipse(26834.157501, 20486.613022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30350.362000, 17714.356000, 1661.400048, 441.900813, 338.732000, X, Y)
[Wed May 29 19:58:06 2013] Writing fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73.gif
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_src.evt and ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_bgd.evt exist, delete to re-create
[Wed May 29 19:58:09 2013] Mean detx,y = (-8472.92, 293.64) 
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_src.img and ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_bgd.img exist, delete to re-create
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_bgd.pi exist, delete to re-create
[Wed May 29 19:58:09 2013] Setting source spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed May 29 19:58:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_bgd.lc exist, delete to re-create
[Wed May 29 19:58:16 2013] Not generating rmf since there are only 88 counts
[Wed May 29 19:58:16 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73.arf exists, delete to re-create
[Wed May 29 19:59:56 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:56 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_src_b10.pi.gz = 106.00
[Wed May 29 19:59:56 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_bgd.pi.gz = 132.00
[Wed May 29 19:59:56 2013] Got source and background scale factors 253580.000000, 2079816.000000
[Wed May 29 19:59:56 2013] User source parameters:
  Position = (320.1, 217.9) = 5 38 42.28 -2 43 15.8
  Extent = 4.8 (3.8-5.7)", rotation angle = 0
  Source aperture counts = 89.9 +/- 11.3
  Background aperture counts = 16.1
  Rate = 0.002 +/- 0.0003

[Wed May 29 20:00:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:02 2013] Using photon index=1.80, rate=0.00206, arf fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73.arf
[Wed May 29 20:00:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:02 2013] Updating source flux to 4.9e-14
[Wed May 29 20:00:20 2013] Source 73 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 20:00:38 2013] xmm0101440301/analysis//spectral/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src73_pl.csv not found, spectral fit skipped or did not complete