[Wed May 29 10:58:17 2013] Detection parameters:
  Position = (395.5, 290.5) = 5 38 20.41 -2 38 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.4 +/- 8.6
  Background counts = 12.1
  Rate = 0.001 +/- 0.0003

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 7.06'
[Wed May 29 10:59:15 2013] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 9.96"
[Wed May 29 10:59:15 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.803
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 9.96"
[Wed May 29 10:59:17 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src79.ximg exists
[Wed May 29 10:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src79.csv
[Wed May 29 10:59:17 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src79_1.ximg exists
[Wed May 29 10:59:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src79.csv
[Wed May 29 10:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:19 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Wed May 29 10:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src79.csv
[Wed May 29 10:59:19 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Wed May 29 10:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src79.csv
[Wed May 29 10:59:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:54 2013] Spatial fit model total counts = 163.315000, observed total counts = 141.000000
[Wed May 29 10:59:54 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:54 2013] Assessing source extent using major
[Wed May 29 10:59:54 2013] Source does appear to be extended
[Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:59:54 2013] Deleting source due to low Poisson probability 0.9