[Wed May 29 10:58:17 2013] Detection parameters:
  Position = (417.9, 330.0) = 5 38 13.91 -2 35 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.2 +/- 12.0
  Background counts = 11.0
  Rate = 0.003 +/- 0.0004

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 8.96'
[Wed May 29 10:59:15 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Wed May 29 10:59:15 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 10.91"
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src51.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src51.csv
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src51_1.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src51.csv
[Wed May 29 10:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Wed May 29 10:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Wed May 29 10:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Wed May 29 10:59:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:54 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 11.194301 pixels away
[Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:54 2013] Assessing source extent using major
[Wed May 29 10:59:54 2013] Source does appear to be extended
[Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:35 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:35 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Wed May 29 11:00:35 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Wed May 29 11:00:35 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 10.91"
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src48.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src48.csv
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src48_1.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src48.csv
[Wed May 29 11:00:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Wed May 29 11:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src48.csv
[Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Wed May 29 11:00:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src48.csv
[Wed May 29 11:00:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:10 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 11.171245 pixels away
[Wed May 29 11:01:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:10 2013] Assessing source extent using major
[Wed May 29 11:01:10 2013] Source does appear to be extended
[Wed May 29 11:01:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:06 2013] XMMSAS src. selection expression = ellipse(36305.809906, 28661.462830, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:06 2013] Not overwriting source region fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_src.reg
[Wed May 29 19:58:06 2013] Extracting stamp from image fullrun_mos1_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (380, 292) - (455, 367)
[Wed May 29 19:58:06 2013] XMMSAS bgd. selection expression = annulus(36305.809906, 28661.462830, 1087.500000, 2175.000000, X, Y) && !ellipse(37998.927399, 27689.493774, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 19:58:06 2013] Writing fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43.gif
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_src.evt and ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_bgd.evt exist, delete to re-create
[Wed May 29 19:58:09 2013] Mean detx,y = (1026.36, 9086.56) 
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_src.img and ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_bgd.img exist, delete to re-create
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_bgd.pi exist, delete to re-create
[Wed May 29 19:58:09 2013] Setting source spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed May 29 19:58:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_bgd.lc exist, delete to re-create
[Wed May 29 19:58:16 2013] Not generating rmf since there are only 83 counts
[Wed May 29 19:58:16 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43.arf exists, delete to re-create
[Wed May 29 19:59:58 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:58 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 140.00
[Wed May 29 19:59:58 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_bgd.pi.gz = 494.00
[Wed May 29 19:59:58 2013] Got source and background scale factors 1299592.000000, 8936822.000000
[Wed May 29 19:59:58 2013] User source parameters:
  Position = (417.9, 330.0) = 5 38 13.91 -2 35 8.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 68.2 +/- 12.9
  Background aperture counts = 71.8
  Rate = 0.002 +/- 0.0003

[Wed May 29 19:59:58 2013] Updating counts from extracted products
[Wed May 29 19:59:58 2013] Set source signif. to 68.16/8.48 = 8.04
[Wed May 29 20:00:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:02 2013] Using photon index=1.80, rate=0.00158, arf fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43.arf
[Wed May 29 20:00:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:02 2013] Updating source flux to 2.9e-14
[Wed May 29 20:00:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:38 2013] xmm0101440301/analysis//spectral/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete