[Wed May 29 10:58:17 2013] Detection parameters: Position = (121.4, 355.2) = 5 39 39.98 -2 33 16.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 307.8 +/- 21.4 Background counts = 9.1 Rate = 0.007 +/- 0.0005 [Wed May 29 10:58:18 2013] Off-axis axis estimate = 13.48' [Wed May 29 10:59:15 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting [Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 13.17" [Wed May 29 10:59:15 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.984 [Wed May 29 10:59:15 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 13.17" [Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src34.ximg exists [Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src34.csv [Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src34_1.ximg exists [Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src34.csv [Wed May 29 10:59:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src34_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists [Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists [Wed May 29 10:59:18 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly [Wed May 29 10:59:54 2013] Spatial fit model total counts = 365.628000, observed total counts = 352.000000 [Wed May 29 10:59:54 2013] Offset between fit and detection position for source 35 = 0.360212 pixels [Wed May 29 10:59:54 2013] 369.620000 total counts/ 172.511000 bgd. counts: snr = 15.007144 Spatial fit parameters: Offset between fit and detection position for source 35 = 0.360212 pixels Position = (121.5, 355.6) = 5 39 39.95 -2 33 17.0 Extent = 5.9 (5.2-6.7)", rotation angle = 0 Source counts = 197.1 +/- 19.2 Background counts = 172.5 Rate = 0.005 +/- 0.0004 [Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000 [Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 10:59:54 2013] Assessing source extent using major axis lower bound [Wed May 29 10:59:54 2013] Source does appear to be extended [Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 11:00:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 29 11:00:35 2013] Initial guess for spatial extent in simple fitting = 5.86" [Wed May 29 11:00:35 2013] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.659 [Wed May 29 11:00:35 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 5.86" [Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src33.ximg exists [Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src33.csv [Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src33_1.ximg exists [Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src33.csv [Wed May 29 11:00:37 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src33_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists [Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists [Wed May 29 11:00:38 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly [Wed May 29 11:01:10 2013] Warning, spatial fit 33 centroid is now closest to src. 39 [Wed May 29 11:01:10 2013] Vigneting correction estimate = 1.000000 [Wed May 29 11:01:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 11:01:10 2013] Assessing source extent using major axis lower bound [Wed May 29 11:01:10 2013] Source does appear to be extended [Wed May 29 11:01:10 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 19:58:06 2013] XMMSAS src. selection expression = ellipse(10520.441000, 30884.486600, 351.659410, 351.659410, 0.000000, X, Y) [Wed May 29 19:58:06 2013] Not overwriting source region fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_src.reg [Wed May 29 19:58:06 2013] Extracting stamp from image fullrun_mos1_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (101, 335) - (142, 376) [Wed May 29 19:58:06 2013] XMMSAS bgd. selection expression = annulus(10520.441000, 30884.486600, 586.099017, 1172.198034, X, Y) [Wed May 29 19:58:06 2013] Writing fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35.gif [Wed May 29 19:58:08 2013] ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create [Wed May 29 19:58:08 2013] Mean detx,y = (4047.34, -16599.73) [Wed May 29 19:58:08 2013] ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_src.img and ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create [Wed May 29 19:58:08 2013] ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create [Wed May 29 19:58:08 2013] Setting source spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Wed May 29 19:58:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.pi.gz [Wed May 29 19:58:08 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create [Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35.rmf exists, delete to re-create [Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35.arf exists, delete to re-create [Wed May 29 19:59:55 2013] Updating aperture counts using extracted products [Wed May 29 19:59:55 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 222.00 [Wed May 29 19:59:56 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 164.00 [Wed May 29 19:59:56 2013] Got source and background scale factors 397580.000000, 2582810.000000 [Wed May 29 19:59:56 2013] User source parameters: Position = (121.5, 355.6) = 5 39 39.95 -2 33 17.0 Extent = 5.9 (5.2-6.7)", rotation angle = 0 Source aperture counts = 196.8 +/- 15.9 Background aperture counts = 25.2 Rate = 0.005 +/- 0.0004 [Wed May 29 20:00:02 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 20:00:02 2013] Using photon index=1.80, rate=0.00458, arf fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35.arf [Wed May 29 20:00:02 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 20:00:02 2013] Updating source flux to 2.5e-13 [Wed May 29 20:00:38 2013] xmm0101440301/analysis//spectral/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete