[Wed May 29 10:58:16 2013] Detection parameters:
  Position = (240.4, 366.3) = 5 39 5.44 -2 32 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 288.1 +/- 20.5
  Background counts = 12.0
  Rate = 0.01 +/- 0.0008

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 6.47'
[Wed May 29 10:59:15 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 9.67"
[Wed May 29 10:59:15 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.844
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.67"
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src25.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src25.csv
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src25.csv
[Wed May 29 10:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed May 29 10:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed May 29 10:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May 29 10:59:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:54 2013] Warning, spatial fit 25 centroid is now closest to src. 33
[Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:54 2013] Assessing source extent using major
[Wed May 29 10:59:54 2013] Source does appear to be extended
[Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:35 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:35 2013] Initial guess for spatial extent in simple fitting = 9.67"
[Wed May 29 11:00:35 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.844
[Wed May 29 11:00:35 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 9.67"
[Wed May 29 11:00:36 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src24.ximg exists
[Wed May 29 11:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src24.csv
[Wed May 29 11:00:36 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed May 29 11:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src24.csv
[Wed May 29 11:00:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed May 29 11:00:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:01:10 2013] Spatial fit model total counts = 491.384000, observed total counts = 352.000000
[Wed May 29 11:01:10 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 11:01:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:10 2013] Assessing source extent using major
[Wed May 29 11:01:10 2013] Source does appear to be extended
[Wed May 29 11:01:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:05 2013] XMMSAS src. selection expression = ellipse(20862.530655, 31816.800537, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:05 2013] Not overwriting source region fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_src.reg
[Wed May 29 19:58:05 2013] Extracting stamp from image fullrun_mos1_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (203, 329) - (278, 404)
[Wed May 29 19:58:05 2013] XMMSAS bgd. selection expression = annulus(20862.530655, 31816.800537, 1087.500000, 2175.000000, X, Y) && !ellipse(19008.039920, 33511.140200, 465.024013, 465.024013, 0.000000, X, Y) && !ellipse(20147.519318, 31761.198914, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 19:58:05 2013] Writing fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32.gif
[Wed May 29 19:58:08 2013] ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_src.evt and ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_bgd.evt exist, delete to re-create
[Wed May 29 19:58:08 2013] Mean detx,y = (4648.65, -6198.74) 
[Wed May 29 19:58:08 2013] ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_src.img and ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_bgd.img exist, delete to re-create
[Wed May 29 19:58:08 2013] ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_bgd.pi exist, delete to re-create
[Wed May 29 19:58:08 2013] Setting source spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed May 29 19:58:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed May 29 19:58:08 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_bgd.lc exist, delete to re-create
[Wed May 29 19:58:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 19:58:16 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32.arf exists, delete to re-create
[Wed May 29 19:59:54 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:54 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 336.00
[Wed May 29 19:59:54 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_bgd.pi.gz = 576.00
[Wed May 29 19:59:54 2013] Got source and background scale factors 1063930.000000, 8994118.000000
[Wed May 29 19:59:54 2013] User source parameters:
  Position = (240.4, 366.3) = 5 39 5.44 -2 32 29.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 267.9 +/- 19.4
  Background aperture counts = 68.1
  Rate = 0.006 +/- 0.0004

[Wed May 29 19:59:54 2013] Updating counts from extracted products
[Wed May 29 19:59:54 2013] Set source signif. to 267.86/8.25 = 32.45
[Wed May 29 20:00:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:02 2013] Using photon index=1.80, rate=0.00622, arf fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32.arf
[Wed May 29 20:00:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:02 2013] Updating source flux to 1.3e-13
[Wed May 29 20:00:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:38 2013] xmm0101440301/analysis//spectral/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete