[Wed May 29 10:58:16 2013] Detection parameters:
  Position = (316.8, 372.7) = 5 38 43.26 -2 32 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 11.1
  Background counts = 17.8
  Rate = 0.001 +/- 0.0003

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 5.54'
[Wed May 29 10:59:15 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Wed May 29 10:59:15 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.914
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 9.20"
[Wed May 29 10:59:17 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src71.ximg exists
[Wed May 29 10:59:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src71.csv
[Wed May 29 10:59:17 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src71_1.ximg exists
[Wed May 29 10:59:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src71.csv
[Wed May 29 10:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:19 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Wed May 29 10:59:19 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Wed May 29 10:59:19 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Wed May 29 10:59:54 2013] Source 29 is offset by -3.788113 and -2.882046 pixels which is larger than
2 X fitted extent = 0.944828 x 0.944828, not incorporating fit results
[Wed May 29 10:59:54 2013] Warning, spatial fit 71 centroid is now closest to src. 31
[Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:54 2013] Assessing source extent using major
[Wed May 29 10:59:54 2013] Source does appear to be extended
[Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:35 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:35 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Wed May 29 11:00:35 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.914
[Wed May 29 11:00:35 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 9.20"
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src65.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src65.csv
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src65_1.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src65.csv
[Wed May 29 11:00:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Wed May 29 11:00:38 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Wed May 29 11:01:10 2013] Warning, spatial fit 65 centroid is now closest to src. 31
[Wed May 29 11:01:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:10 2013] Assessing source extent using major
[Wed May 29 11:01:10 2013] Source does appear to be extended
[Wed May 29 11:01:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:07 2013] XMMSAS src. selection expression = ellipse(27510.534180, 32374.362000, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 19:58:07 2013] Not overwriting source region fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_src.reg
[Wed May 29 19:58:07 2013] Extracting stamp from image fullrun_mos1_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (279, 335) - (354, 410)
[Wed May 29 19:58:07 2013] XMMSAS bgd. selection expression = annulus(27510.534180, 32374.362000, 1087.500000, 2175.000000, X, Y) && !ellipse(29723.299316, 33747.426331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24470.775208, 30762.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27200.320000, 31753.452000, 422.590412, 422.590412, 0.000000, X, Y) && !ellipse(27389.668400, 30709.820800, 429.899642, 429.899642, 0.000000, X, Y) && !ellipse(28426.858000, 34465.837400, 452.250413, 452.250413, 0.000000, X, Y) && !ellipse(29843.159385, 32577.673512, 442.130243, 386.436990, 21.670161, X, Y) && !ellipse(30191.203094, 29693.395721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28169.262878, 34399.278503, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 19:58:07 2013] Writing fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29.gif
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Wed May 29 19:58:09 2013] Mean detx,y = (4647.58, 271.11) 
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_src.img and ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Wed May 29 19:58:09 2013] Setting source spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed May 29 19:58:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Wed May 29 19:58:16 2013] Not generating rmf since there are only 52 counts
[Wed May 29 19:58:16 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Wed May 29 20:00:00 2013] Updating aperture counts using extracted products
[Wed May 29 20:00:00 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 636.00
[Wed May 29 20:00:00 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_bgd.pi.gz = 863.00
[Wed May 29 20:00:00 2013] Got source and background scale factors 1331200.000000, 8086464.000000
[Wed May 29 20:00:00 2013] User source parameters:
  Position = (316.8, 372.7) = 5 38 43.26 -2 32 0.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 493.9 +/- 26.2
  Background aperture counts = 142.1
  Rate = 0.01 +/- 0.0006

[Wed May 29 20:00:00 2013] Updating counts from extracted products
[Wed May 29 20:00:00 2013] Set source signif. to 493.93/11.92 = 41.44
[Wed May 29 20:00:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:02 2013] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29.arf
[Wed May 29 20:00:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:02 2013] Updating source flux to 1.7e-13
[Wed May 29 20:00:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 20:00:38 2013] xmm0101440301/analysis//spectral/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete