[Wed May 29 10:58:16 2013] Detection parameters:
  Position = (219.1, 385.8) = 5 39 11.60 -2 31 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 246.6 +/- 19.5
  Background counts = 11.5
  Rate = 0.01 +/- 0.0009

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 8.56'
[Wed May 29 10:59:15 2013] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 10.71"
[Wed May 29 10:59:15 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.026
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.71"
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src24.ximg exists
[Wed May 29 10:59:16 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src24.csv
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed May 29 10:59:16 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src24.csv
[Wed May 29 10:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed May 29 10:59:18 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Wed May 29 10:59:54 2013] Spatial fit model total counts = 352.000000, observed total counts = 352.000000
[Wed May 29 10:59:54 2013] Offset between fit and detection position for source 26 = 0.118933 pixels
[Wed May 29 10:59:54 2013] 341.220000 total counts/ 168.950000 bgd. counts: snr = 13.253499
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.118933 pixels
  Position = (219.0, 385.8) = 5 39 11.63 -2 31 5.6
  Extent = 5.7 (4.8-6.6)", rotation angle = 0
  Source counts = 172.3 +/- 18.5
  Background counts = 168.9
  Rate = 0.004 +/- 0.0004
[Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:54 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:59:54 2013] Source does appear to be extended
[Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:35 2013] Initial guess for spatial extent in simple fitting = 5.67"
[Wed May 29 11:00:35 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.229
[Wed May 29 11:00:35 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 5.67"
[Wed May 29 11:00:36 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src23.ximg exists
[Wed May 29 11:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src23.csv
[Wed May 29 11:00:36 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed May 29 11:00:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src23.csv
[Wed May 29 11:00:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed May 29 11:00:37 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Wed May 29 11:01:10 2013] Spatial fit model total counts = 349.999000, observed total counts = 350.000000
[Wed May 29 11:01:10 2013] Offset between fit and detection position for source 26 = 0.016511 pixels
[Wed May 29 11:01:10 2013] 344.055000 total counts/ 168.706000 bgd. counts: snr = 13.500132
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.016511 pixels
  Position = (219.0, 385.7) = 5 39 11.63 -2 31 5.7
  Extent = 5.8 (4.8-6.7)", rotation angle = 0
  Source counts = 175.3 +/- 18.5
  Background counts = 168.7
  Rate = 0.004 +/- 0.0004
[Wed May 29 11:01:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:10 2013] Assessing source extent using major axis lower bound
[Wed May 29 11:01:10 2013] Source does appear to be extended
[Wed May 29 11:01:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:05 2013] XMMSAS src. selection expression = ellipse(19008.039920, 33511.140200, 348.768010, 348.768010, 0.000000, X, Y)
[Wed May 29 19:58:05 2013] Not overwriting source region fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_src.reg
[Wed May 29 19:58:05 2013] Extracting stamp from image fullrun_mos1_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (199, 366) - (239, 406)
[Wed May 29 19:58:05 2013] XMMSAS bgd. selection expression = annulus(19008.039920, 33511.140200, 581.280017, 1162.560033, X, Y) && !ellipse(20862.530655, 31816.800537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17051.544083, 35448.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17977.863080, 32841.352400, 607.286417, 607.286417, 0.000000, X, Y) && !ellipse(20147.519318, 31761.198914, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 19:58:05 2013] Writing fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26.gif
[Wed May 29 19:58:08 2013] ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Wed May 29 19:58:08 2013] Mean detx,y = (6394.13, -8041.36) 
[Wed May 29 19:58:08 2013] ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_src.img and ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Wed May 29 19:58:08 2013] ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Wed May 29 19:58:08 2013] Setting source spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed May 29 19:58:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed May 29 19:58:08 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26.rmf exists, delete to re-create
[Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26.arf exists, delete to re-create
[Wed May 29 19:59:54 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:54 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 210.00
[Wed May 29 19:59:54 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_bgd.pi.gz = 169.00
[Wed May 29 19:59:54 2013] Got source and background scale factors 387200.000000, 2598850.000000
[Wed May 29 19:59:54 2013] User source parameters:
  Position = (219.0, 385.7) = 5 39 11.63 -2 31 5.7
  Extent = 5.8 (4.8-6.7)", rotation angle = 0
  Source aperture counts = 184.8 +/- 15.5
  Background aperture counts = 25.2
  Rate = 0.004 +/- 0.0004

[Wed May 29 20:00:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:02 2013] Using photon index=1.80, rate=0.00407, arf fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26.arf
[Wed May 29 20:00:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:02 2013] Updating source flux to 1.1e-13
[Wed May 29 20:00:38 2013] xmm0101440301/analysis//spectral/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete