[Wed May 29 10:58:16 2013] Detection parameters:
  Position = (375.6, 412.2) = 5 38 26.17 -2 29 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.2 +/- 12.3
  Background counts = 9.5
  Rate = 0.004 +/- 0.0005

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 9.97'
[Wed May 29 10:59:15 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Wed May 29 10:59:15 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 11.41"
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src44.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src44.csv
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src44_1.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src44.csv
[Wed May 29 10:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Wed May 29 10:59:18 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Wed May 29 10:59:54 2013] Spatial fit model total counts = 190.999000, observed total counts = 191.000000
[Wed May 29 10:59:54 2013] Offset between fit and detection position for source 18 = 0.614223 pixels
[Wed May 29 10:59:54 2013] 189.228500 total counts/ 123.152000 bgd. counts: snr = 5.954239
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.614223 pixels
  Position = (375.0, 412.2) = 5 38 26.35 -2 29 10.6
  Extent = 5.6 (4.1-7.3)", rotation angle = 0
  Source counts = 66.1 +/- 13.8
  Background counts = 123.2
  Rate = 0.002 +/- 0.0003
[Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:54 2013] Assessing source extent using major axis lower bound
[Wed May 29 10:59:54 2013] Source does appear to be extended
[Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 11:00:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 11:00:35 2013] Initial guess for spatial extent in simple fitting = 5.63"
[Wed May 29 11:00:35 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.243
[Wed May 29 11:00:35 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 5.63"
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src41.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src41.csv
[Wed May 29 11:00:37 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed May 29 11:00:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src41.csv
[Wed May 29 11:00:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed May 29 11:00:38 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed May 29 11:00:38 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed May 29 11:01:10 2013] Spatial fit model total counts = 191.000000, observed total counts = 191.000000
[Wed May 29 11:01:10 2013] Offset between fit and detection position for source 18 = 0.000111 pixels
[Wed May 29 11:01:10 2013] 189.228200 total counts/ 123.134000 bgd. counts: snr = 5.956270
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.000111 pixels
  Position = (375.0, 412.2) = 5 38 26.35 -2 29 10.6
  Extent = 5.6 (4.1-7.3)", rotation angle = 0
  Source counts = 66.1 +/- 13.8
  Background counts = 123.1
  Rate = 0.002 +/- 0.0003
[Wed May 29 11:01:10 2013] Vigneting correction estimate = 1.000000
[Wed May 29 11:01:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 11:01:10 2013] Assessing source extent using major axis lower bound
[Wed May 29 11:01:10 2013] Source does appear to be extended
[Wed May 29 11:01:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 19:58:06 2013] XMMSAS src. selection expression = ellipse(32578.253160, 35813.710200, 337.806010, 337.806010, 0.000000, X, Y)
[Wed May 29 19:58:06 2013] Not overwriting source region fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_src.reg
[Wed May 29 19:58:06 2013] Extracting stamp from image fullrun_mos1_xmm0101440301_pi300-10000_cl_sm2.00.img.gz, (356, 393) - (394, 432)
[Wed May 29 19:58:06 2013] XMMSAS bgd. selection expression = annulus(32578.253160, 35813.710200, 563.010016, 1126.020032, X, Y)
[Wed May 29 19:58:06 2013] Writing fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18.gif
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0101440301/products/events/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Wed May 29 19:58:09 2013] Mean detx,y = (8278.67, 5598.21) 
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_src.img and ../../xmm0101440301/products/images/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0101440301/products/spectra/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Wed May 29 19:58:09 2013] Setting source spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed May 29 19:58:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed May 29 19:58:09 2013] ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0101440301/products/lightcurves/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Wed May 29 19:58:16 2013] Not generating rmf since there are only 66 counts
[Wed May 29 19:58:16 2013] rmf not generated due to insufficient counts
[Wed May 29 19:58:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Wed May 29 19:59:57 2013] Updating aperture counts using extracted products
[Wed May 29 19:59:57 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 87.00
[Wed May 29 19:59:57 2013] Total counts from fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_bgd.pi.gz = 126.00
[Wed May 29 19:59:57 2013] Got source and background scale factors 323996.000000, 2380064.000000
[Wed May 29 19:59:57 2013] User source parameters:
  Position = (375.0, 412.2) = 5 38 26.35 -2 29 10.6
  Extent = 5.6 (4.1-7.3)", rotation angle = 0
  Source aperture counts = 69.8 +/- 10.4
  Background aperture counts = 17.2
  Rate = 0.002 +/- 0.0002

[Wed May 29 20:00:02 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 20:00:02 2013] Using photon index=1.80, rate=0.00154, arf fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18.arf
[Wed May 29 20:00:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 20:00:02 2013] Updating source flux to 4e-14
[Wed May 29 20:00:20 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 20:00:38 2013] xmm0101440301/analysis//spectral/fullrun_mos1_xmm0101440301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete