[Wed May 29 10:58:16 2013] Detection parameters:
  Position = (209.0, 420.8) = 5 39 14.53 -2 28 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.6 +/- 17.9
  Background counts = 11.4
  Rate = 0.005 +/- 0.0004

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 10.99'
[Wed May 29 10:59:15 2013] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 11.92"
[Wed May 29 10:59:15 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.857
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 11.92"
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src41.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src41.csv
[Wed May 29 10:59:16 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src41_1.ximg exists
[Wed May 29 10:59:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src41.csv
[Wed May 29 10:59:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Wed May 29 10:59:18 2013] Fit fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Wed May 29 10:59:54 2013] Spatial fit model total counts = 448.491000, observed total counts = 445.000000
[Wed May 29 10:59:54 2013] Offset between fit and detection position for source 17 = 2.155648 pixels
[Wed May 29 10:59:54 2013] Warning, changing simple spatial fit ID from 41 to 30
[Wed May 29 10:59:54 2013] 461.369016 total counts/ 461.369000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.155648 pixels
  Position = (207.4, 419.4) = 5 39 15.01 -2 28 39.3
  Extent = 23.7 (3.0-44.4)", rotation angle = 0
  Source counts = 0.0 +/- 21.5
  Background counts = 461.4
  Rate = 4e-10 +/- 0.0005
  Deleting source due to low Poisson probability