[Wed May 29 10:58:16 2013] Detection parameters:
  Position = (290.7, 432.1) = 5 38 50.81 -2 27 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.4 +/- 9.3
  Background counts = 11.8
  Rate = 0.002 +/- 0.0004

[Wed May 29 10:58:18 2013] Off-axis axis estimate = 9.70'
[Wed May 29 10:59:15 2013] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Wed May 29 10:59:15 2013] Initial guess for spatial extent in simple fitting = 11.28"
[Wed May 29 10:59:15 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Wed May 29 10:59:15 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 11.28"
[Wed May 29 10:59:17 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src69.ximg exists
[Wed May 29 10:59:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src69.csv
[Wed May 29 10:59:17 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src69_1.ximg exists
[Wed May 29 10:59:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src69.csv
[Wed May 29 10:59:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Wed May 29 10:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src69.csv
[Wed May 29 10:59:18 2013] fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Wed May 29 10:59:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src69.csv
[Wed May 29 10:59:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440301_pi300-10000_cl_pass0_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 10:59:54 2013] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.273636 pixels away
[Wed May 29 10:59:54 2013] Vigneting correction estimate = 1.000000
[Wed May 29 10:59:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 10:59:54 2013] Assessing source extent using major
[Wed May 29 10:59:54 2013] Source does appear to be extended
[Wed May 29 10:59:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 10:59:54 2013] Deleting source due to low Poisson probability 0.9