[Fri May 31 21:46:15 2013] Detection parameters: Position = (262.1, 335.7) = 10 42 52.11 -64 19 14.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 207.8 +/- 21.9 Background counts = 97.9 Rate = 0.006 +/- 0.0006 [Fri May 31 21:46:15 2013] Off-axis axis estimate = 3.78' [Fri May 31 21:51:13 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting [Fri May 31 21:51:13 2013] Initial guess for spatial extent in simple fitting = 8.32" [Fri May 31 21:51:13 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860 [Fri May 31 21:51:13 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 8.32" [Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src23.ximg exists [Fri May 31 22:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src23.csv [Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src23_1.ximg exists [Fri May 31 22:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src23.csv [Fri May 31 22:57:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Fri May 31 22:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src23.csv [Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Fri May 31 22:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src23.csv [Fri May 31 22:57:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 00:46:16 2013] Warning, spatial fit 23 centroid is now closest to src. 19 [Sat Jun 1 00:46:16 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 00:46:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 00:46:16 2013] Assessing source extent using major [Sat Jun 1 00:46:16 2013] Source does appear to be extended [Sat Jun 1 00:46:16 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 00:46:16 2013] Source is confused with source 19 [Sat Jun 1 00:46:50 2013] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 00:46:50 2013] Initial guess for spatial extent in simple fitting = 8.32" [Sat Jun 1 00:46:50 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.860 [Sat Jun 1 00:46:50 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 8.32" [Sat Jun 1 02:18:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src23.ximg exists [Sat Jun 1 02:18:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src23.csv [Sat Jun 1 02:18:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src23_1.ximg exists [Sat Jun 1 02:18:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src23.csv [Sat Jun 1 02:18:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 02:18:02 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Sat Jun 1 02:18:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src23.csv [Sat Jun 1 02:18:02 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Sat Jun 1 02:18:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src23.csv [Sat Jun 1 02:18:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 04:24:51 2013] Spatial fit model total counts = -162.648000, observed total counts = 528.000000 [Sat Jun 1 04:24:51 2013] Poor agreement between spatial fit and data for source 23 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 1 04:24:51 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 04:24:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 04:24:51 2013] Assessing source extent using major [Sat Jun 1 04:24:51 2013] Source does appear to be extended [Sat Jun 1 04:24:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 04:25:22 2013] XMMSAS src. selection expression = ellipse(22752.729645, 29160.361420, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 04:25:22 2013] Writing source region out to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src23_src.reg [Sat Jun 1 04:25:22 2013] Extracting stamp from image fullrun_pn_xmm0101440201_pi300-10000_cl_sm2.00.img.gz, (225, 298) - (300, 373) [Sat Jun 1 04:25:22 2013] XMMSAS bgd. selection expression = annulus(22752.729645, 29160.361420, 1087.500000, 2175.000000, X, Y) && !ellipse(24126.549000, 26922.104600, 1391.349640, 1341.655239, 78.603400, X, Y) && !ellipse(22736.571420, 31792.591000, 644.540019, 415.036812, 40.061000, X, Y) && !ellipse(23028.504883, 29569.822693, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 1 04:25:22 2013] Writing fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src23.gif [Sat Jun 1 05:28:39 2013] Mean detx,y = (2310.62, -1666.87) [Sat Jun 1 05:28:48 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 05:29:40 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 05:29:41 2013] Setting source spectrum file to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Sat Jun 1 05:29:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src23_bgd.pi.gz [Sat Jun 1 06:15:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 1 06:15:56 2013] rmf not generated due to insufficient counts [Sat Jun 1 08:07:29 2013] Updating aperture counts using extracted products [Sat Jun 1 08:07:29 2013] Total counts from fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 443.00 [Sat Jun 1 08:07:29 2013] Total counts from fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1458.00 [Sat Jun 1 08:07:29 2013] Got source and background scale factors 1184452.000000, 7808654.000000 [Sat Jun 1 08:07:29 2013] User source parameters: Position = (262.1, 335.7) = 10 42 52.11 -64 19 14.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 221.8 +/- 22.1 Background aperture counts = 221.2 Rate = 0.007 +/- 0.0007 [Sat Jun 1 08:07:29 2013] Updating counts from extracted products [Sat Jun 1 08:07:29 2013] Set source signif. to 221.84/14.87 = 14.92 [Sat Jun 1 08:07:36 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 08:07:36 2013] Using photon index=1.80, rate=0.00673, arf fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src23.arf [Sat Jun 1 08:07:36 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 08:07:36 2013] Updating source flux to 3.4e-14 [Sat Jun 1 08:08:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 08:08:26 2013] xmm0101440201/analysis//spectral/fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete