[Fri May 31 21:46:13 2013] Detection parameters:
  Position = (229.4, 289.8) = 10 43 14.05 -64 22 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2405.9 +/- 59.7
  Background counts = 95.5
  Rate = 0.08 +/- 0.002

[Fri May 31 21:46:15 2013] Off-axis axis estimate = 5.04'
[Fri May 31 21:51:13 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:51:13 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Fri May 31 21:51:13 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Fri May 31 21:51:13 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.95"
[Fri May 31 22:57:00 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 31 22:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src2.csv
[Fri May 31 22:57:00 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 31 22:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src2.csv
[Fri May 31 22:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 31 22:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 31 22:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May 31 22:57:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 00:46:16 2013] Spatial fit model total counts = 4030.920000, observed total counts = 1892.000000
[Sat Jun  1 00:46:16 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 00:46:16 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 00:46:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 00:46:16 2013] Assessing source extent using major
[Sat Jun  1 00:46:16 2013] Source does appear to be extended
[Sat Jun  1 00:46:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 00:46:50 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 00:46:50 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sat Jun  1 00:46:50 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Sat Jun  1 00:46:50 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.95"
[Sat Jun  1 02:18:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun  1 02:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src2.csv
[Sat Jun  1 02:18:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun  1 02:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src2.csv
[Sat Jun  1 02:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:18:02 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun  1 02:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  1 02:18:02 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun  1 02:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  1 02:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 04:24:51 2013] Spatial fit model total counts = 2224.870000, observed total counts = 1892.000000
[Sat Jun  1 04:24:51 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 04:24:51 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 04:24:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 04:24:51 2013] Assessing source extent using major
[Sat Jun  1 04:24:51 2013] Source does appear to be extended
[Sat Jun  1 04:24:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:25:22 2013] Counts = 2405.869629, rescaling region sizes by 2.000000
[Sat Jun  1 04:25:22 2013] XMMSAS src. selection expression = ellipse(19911.666428, 25164.754730, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun  1 04:25:22 2013] Writing source region out to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun  1 04:25:22 2013] Extracting stamp from image fullrun_pn_xmm0101440201_pi300-10000_cl_sm2.00.img.gz, (154, 215) - (304, 365)
[Sat Jun  1 04:25:22 2013] XMMSAS bgd. selection expression = annulus(19911.666428, 25164.754730, 4350.000000, 8700.000000, X, Y) && !ellipse(22071.887207, 23568.529877, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24126.549000, 26922.104600, 1391.349640, 1341.655239, 78.603400, X, Y) && !ellipse(14100.305115, 21037.198395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12592.583008, 34338.815521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10952.786469, 33554.811920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21737.379000, 33022.744800, 332.321610, 332.321610, 0.000000, X, Y) && !ellipse(18073.047000, 32663.582000, 1061.376031, 272.502408, 115.868800, X, Y) && !ellipse(16745.202480, 32634.818600, 546.402416, 394.244811, 322.593315, X, Y) && !ellipse(22736.571420, 31792.591000, 644.540019, 415.036812, 40.061000, X, Y) && !ellipse(23028.504883, 29569.822693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26006.662600, 29182.212000, 403.189612, 403.189612, 0.000000, X, Y) && !ellipse(22752.729645, 29160.361420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17033.177917, 28471.075989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.528320, 26200.869400, 386.191171, 386.191171, 0.000000, X, Y) && !ellipse(22958.154572, 25950.314178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20756.255142, 23536.741211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19704.036499, 23501.277985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21751.772980, 18448.507660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18765.180969, 17158.071823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24297.749603, 16857.566315, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:25:22 2013] Writing fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src2.gif
[Sat Jun  1 04:46:11 2013] Mean detx,y = (-1644.71, -4476.43) 
[Sat Jun  1 04:46:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 04:50:50 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 04:50:50 2013] Setting source spectrum file to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  1 04:50:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun  1 05:44:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 05:44:32 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:07:20 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:07:20 2013] Total counts from fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2484.00
[Sat Jun  1 08:07:20 2013] Total counts from fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 21144.00
[Sat Jun  1 08:07:20 2013] Got source and background scale factors 4010096.000000, 135988086.000000
[Sat Jun  1 08:07:20 2013] User source parameters:
  Position = (229.4, 289.8) = 10 43 14.05 -64 22 33.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1860.5 +/- 50.8
  Background aperture counts = 623.5
  Rate = 0.06 +/- 0.002

[Sat Jun  1 08:07:20 2013] Updating counts from extracted products
[Sat Jun  1 08:07:20 2013] Set source signif. to 1860.49/24.97 = 74.51
[Sat Jun  1 08:07:34 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:07:34 2013] Using photon index=1.80, rate=0.0565, arf fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src2.arf
[Sat Jun  1 08:07:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:07:34 2013] Updating source flux to 3.6e-13
[Sat Jun  1 08:08:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:08:26 2013] xmm0101440201/analysis//spectral/fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete