[Fri May 31 21:46:14 2013] Detection parameters: Position = (293.9, 467.7) = 10 42 30.80 -64 9 30.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 102.1 +/- 14.1 Background counts = 75.3 Rate = 0.002 +/- 0.0003 [Fri May 31 21:46:15 2013] Off-axis axis estimate = 12.27' [Fri May 31 21:51:13 2013] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting [Fri May 31 21:51:13 2013] Initial guess for spatial extent in simple fitting = 12.57" [Fri May 31 21:51:13 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.914 [Fri May 31 21:51:13 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 12.57" [Fri May 31 22:57:00 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src10.ximg exists [Fri May 31 22:57:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src10.csv [Fri May 31 22:57:00 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src10_1.ximg exists [Fri May 31 22:57:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src10.csv [Fri May 31 22:57:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Fri May 31 22:57:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src10.csv [Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Fri May 31 22:57:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src10.csv [Fri May 31 22:57:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 00:46:16 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.051096 pixels away [Sat Jun 1 00:46:16 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 00:46:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 00:46:16 2013] Assessing source extent using major [Sat Jun 1 00:46:16 2013] Source does appear to be extended [Sat Jun 1 00:46:16 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 00:46:50 2013] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting [Sat Jun 1 00:46:50 2013] Initial guess for spatial extent in simple fitting = 12.57" [Sat Jun 1 00:46:50 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.914 [Sat Jun 1 00:46:50 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 12.57" [Sat Jun 1 02:18:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src10.ximg exists [Sat Jun 1 02:18:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src10_1.ximg exists [Sat Jun 1 02:18:01 2013] Fit fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src10 appears to have run properly [Sat Jun 1 02:18:02 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Sat Jun 1 02:18:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src10.csv [Sat Jun 1 02:18:02 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Sat Jun 1 02:18:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src10.csv [Sat Jun 1 02:18:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 1 04:24:51 2013] Source 10 is offset by -1.930474 and -4.637703 pixels which is larger than 2 X fitted extent = 1.444331 x 5.775081, not incorporating fit results [Sat Jun 1 04:24:51 2013] Vigneting correction estimate = 1.000000 [Sat Jun 1 04:24:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 1 04:24:51 2013] Assessing source extent using major [Sat Jun 1 04:24:51 2013] Source does appear to be extended [Sat Jun 1 04:24:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 04:25:22 2013] XMMSAS src. selection expression = ellipse(25519.596741, 40639.255798, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 04:25:22 2013] Writing source region out to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src10_src.reg [Sat Jun 1 04:25:22 2013] Extracting stamp from image fullrun_pn_xmm0101440201_pi300-10000_cl_sm2.00.img.gz, (256, 430) - (331, 505) [Sat Jun 1 04:25:22 2013] XMMSAS bgd. selection expression = annulus(25519.596741, 40639.255798, 1087.500000, 2175.000000, X, Y) [Sat Jun 1 04:25:22 2013] Writing fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src10.gif [Sat Jun 1 05:12:39 2013] Mean detx,y = (13585.48, 1285.68) [Sat Jun 1 05:12:45 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 1 05:13:11 2013] Binned source spectrum to 10 counts/bin [Sat Jun 1 05:13:11 2013] Setting source spectrum file to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Sat Jun 1 05:13:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src10_bgd.pi.gz [Sat Jun 1 05:54:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 1 05:54:02 2013] rmf not generated due to insufficient counts [Sat Jun 1 08:07:24 2013] Updating aperture counts using extracted products [Sat Jun 1 08:07:24 2013] Total counts from fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 232.00 [Sat Jun 1 08:07:24 2013] Total counts from fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 893.00 [Sat Jun 1 08:07:24 2013] Got source and background scale factors 895578.000000, 5972421.000000 [Sat Jun 1 08:07:24 2013] User source parameters: Position = (293.9, 467.7) = 10 42 30.80 -64 9 30.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 98.1 +/- 16.3 Background aperture counts = 133.9 Rate = 0.003 +/- 0.0005 [Sat Jun 1 08:07:24 2013] Updating counts from extracted products [Sat Jun 1 08:07:24 2013] Set source signif. to 98.09/11.57 = 8.48 [Sat Jun 1 08:07:35 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 08:07:35 2013] Using photon index=1.80, rate=0.00298, arf fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src10.arf [Sat Jun 1 08:07:35 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 08:07:35 2013] Updating source flux to 3.9e-14 [Sat Jun 1 08:08:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 08:08:26 2013] xmm0101440201/analysis//spectral/fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete