[Fri May 31 21:46:13 2013] Detection parameters:
  Position = (254.3, 271.5) = 10 42 57.42 -64 23 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24942.4 +/- 188.7
  Background counts = 97.0
  Rate = 0.6 +/- 0.004

[Fri May 31 21:46:15 2013] Off-axis axis estimate = 3.75'
[Fri May 31 21:51:13 2013] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:51:13 2013] Initial guess for spatial extent in simple fitting = 8.31"
[Fri May 31 21:51:13 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.077
[Fri May 31 21:51:13 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.31"
[Fri May 31 22:57:00 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 31 22:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src1.csv
[Fri May 31 22:57:00 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 31 22:57:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src1.csv
[Fri May 31 22:57:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 31 22:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 31 22:57:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 31 22:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri May 31 22:57:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 00:46:16 2013] Spatial fit model total counts = 27577.000000, observed total counts = 18442.000000
[Sat Jun  1 00:46:16 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 00:46:16 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.483624 pixels away
[Sat Jun  1 00:46:16 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 00:46:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 00:46:16 2013] Assessing source extent using major
[Sat Jun  1 00:46:16 2013] Source does appear to be extended
[Sat Jun  1 00:46:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 00:46:50 2013] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sat Jun  1 00:46:50 2013] Initial guess for spatial extent in simple fitting = 8.31"
[Sat Jun  1 00:46:50 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.077
[Sat Jun  1 00:46:50 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.31"
[Sat Jun  1 02:18:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  1 02:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src1.csv
[Sat Jun  1 02:18:01 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  1 02:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src1.csv
[Sat Jun  1 02:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 02:18:02 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  1 02:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  1 02:18:02 2013] fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  1 02:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  1 02:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  1 04:24:51 2013] Spatial fit model total counts = 27716.000000, observed total counts = 18442.000000
[Sat Jun  1 04:24:51 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  1 04:24:51 2013] Vigneting correction estimate = 1.000000
[Sat Jun  1 04:24:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  1 04:24:51 2013] Assessing source extent using major
[Sat Jun  1 04:24:51 2013] Source does appear to be extended
[Sat Jun  1 04:24:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:25:22 2013] Counts = 24942.390625, rescaling region sizes by 3.000000
[Sat Jun  1 04:25:22 2013] XMMSAS src. selection expression = ellipse(22071.887207, 23568.529877, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Jun  1 04:25:22 2013] Writing source region out to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  1 04:25:22 2013] Extracting stamp from image fullrun_pn_xmm0101440201_pi300-10000_cl_sm2.00.img.gz, (142, 159) - (367, 384)
[Sat Jun  1 04:25:22 2013] XMMSAS bgd. selection expression = annulus(22071.887207, 23568.529877, 9787.500000, 19575.000000, X, Y) && !ellipse(19911.666428, 25164.754730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31418.315155, 18541.999207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24126.549000, 26922.104600, 1391.349640, 1341.655239, 78.603400, X, Y) && !ellipse(8849.072678, 26909.578918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35017.212677, 14914.111420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14100.305115, 21037.198395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37343.607758, 28140.315094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12592.583008, 34338.815521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.596741, 40639.255798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.836426, 37906.617340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.142334, 37232.022186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28798.741119, 36022.353668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10952.786469, 33554.811920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21737.379000, 33022.744800, 332.321610, 332.321610, 0.000000, X, Y) && !ellipse(18073.047000, 32663.582000, 1061.376031, 272.502408, 115.868800, X, Y) && !ellipse(16745.202480, 32634.818600, 546.402416, 394.244811, 322.593315, X, Y) && !ellipse(22736.571420, 31792.591000, 644.540019, 415.036812, 40.061000, X, Y) && !ellipse(23028.504883, 29569.822693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28851.074402, 10656.947174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37597.621000, 29515.330780, 682.256820, 415.451212, 97.420690, X, Y) && !ellipse(26006.662600, 29182.212000, 403.189612, 403.189612, 0.000000, X, Y) && !ellipse(22752.729645, 29160.361420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17033.177917, 28471.075989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20038.524800, 12914.074000, 1407.176040, 259.044807, 34.925125, X, Y) && !ellipse(25978.528320, 26200.869400, 386.191171, 386.191171, 0.000000, X, Y) && !ellipse(22958.154572, 25950.314178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29098.655140, 23660.087600, 467.072013, 467.072013, 0.000000, X, Y) && !ellipse(20756.255142, 23536.741211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19704.036499, 23501.277985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21751.772980, 18448.507660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18765.180969, 17158.071823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24297.749603, 16857.566315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25818.420288, 8857.438675, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:25:22 2013] Writing fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src1.gif
[Sat Jun  1 04:26:07 2013] Mean detx,y = (-3221.75, -2389.60) 
[Sat Jun  1 04:26:27 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 04:45:18 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 04:45:19 2013] Setting source spectrum file to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  1 04:45:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  1 05:42:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 05:42:42 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:07:20 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:07:20 2013] Total counts from fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 21053.00
[Sat Jun  1 08:07:20 2013] Total counts from fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 71003.00
[Sat Jun  1 08:07:20 2013] Got source and background scale factors 8848550.000000, 498450587.000000
[Sat Jun  1 08:07:20 2013] User source parameters:
  Position = (254.3, 271.5) = 10 42 57.42 -64 23 41.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 19792.5 +/- 146.1
  Background aperture counts = 1260.5
  Rate = 0.6 +/- 0.004

[Sat Jun  1 08:07:20 2013] Updating counts from extracted products
[Sat Jun  1 08:07:20 2013] Set source signif. to 19792.55/35.50 = 557.49
[Sat Jun  1 08:07:34 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:07:34 2013] Using photon index=1.80, rate=0.601, arf fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src1.arf
[Sat Jun  1 08:07:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:07:34 2013] Updating source flux to 3.4e-12
[Sat Jun  1 08:08:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:08:26 2013] xmm0101440201/analysis//spectral/fullrun_pn_xmm0101440201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete