[Fri Aug 24 05:19:45 2012] Detection parameters:
  Position = (305.6, 250.7) = 3 26 4.27 48 48 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10093.1 +/- 121.2
  Background counts = 114.6
  Rate = 0.3 +/- 0.003

[Fri Aug 24 05:19:46 2012] Off-axis axis estimate = 3.50'
[Fri Aug 24 05:23:33 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 05:23:33 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Fri Aug 24 05:23:33 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Fri Aug 24 05:23:33 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.18"
[Fri Aug 24 06:15:14 2012] fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Aug 24 06:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 06:15:14 2012] fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Aug 24 06:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_src3.csv
[Fri Aug 24 06:15:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 06:15:14 2012] fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Aug 24 06:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug 24 06:15:14 2012] fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Aug 24 06:15:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Aug 24 06:15:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 07:43:05 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.179664 pixels away
[Fri Aug 24 07:43:05 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 07:43:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 07:43:05 2012] Assessing source extent using major
[Fri Aug 24 07:43:05 2012] Source does appear to be extended
[Fri Aug 24 07:43:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 07:43:30 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 07:43:30 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Fri Aug 24 07:43:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Fri Aug 24 07:43:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.18"
[Fri Aug 24 08:32:09 2012] fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Aug 24 08:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 08:32:09 2012] fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Aug 24 08:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_src3.csv
[Fri Aug 24 08:32:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 08:32:09 2012] fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Aug 24 08:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 24 08:32:09 2012] fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Aug 24 08:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Aug 24 08:32:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 09:57:46 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.019240 pixels away
[Fri Aug 24 09:57:46 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 09:57:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 09:57:46 2012] Assessing source extent using major
[Fri Aug 24 09:57:46 2012] Source does appear to be extended
[Fri Aug 24 09:57:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 09:58:24 2012] Counts = 10093.088867, rescaling region sizes by 3.000000
[Fri Aug 24 09:58:24 2012] XMMSAS src. selection expression = ellipse(26541.533447, 21761.530212, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Aug 24 09:58:24 2012] Writing source region out to fullrun_pn_xmm0101440101_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 24 09:58:24 2012] Extracting stamp from image fullrun_pn_xmm0101440101_pi300-10000_cl_sm2.00.img.gz, (193, 138) - (418, 363)
[Fri Aug 24 09:58:24 2012] XMMSAS bgd. selection expression = annulus(26541.533447, 21761.530212, 9787.500000, 19575.000000, X, Y) && !ellipse(41239.261400, 26773.576000, 759.540022, 759.540022, 0.000000, X, Y) && !ellipse(39488.948425, 21890.265945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17467.652222, 21080.580246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41509.729600, 28046.305800, 1111.944032, 439.169613, 90.000000, X, Y) && !ellipse(37180.071228, 35625.275452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33573.107727, 33456.389984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39268.142914, 27522.816345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.665600, 24577.327000, 444.383213, 444.383213, 0.000000, X, Y) && !ellipse(37796.173431, 23323.125519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27109.016754, 11011.924591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29199.886841, 11240.643417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24555.637909, 15184.133209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15650.349716, 15333.434799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28749.417800, 12536.283000, 479.043214, 479.043214, 0.000000, X, Y) && !ellipse(21932.017280, 38662.907200, 694.773620, 399.752012, 352.487483, X, Y) && !ellipse(26182.917800, 36156.783000, 479.042414, 479.042414, 0.000000, X, Y) && !ellipse(16370.214447, 34738.397430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.792600, 34666.281000, 402.859212, 402.859212, 0.000000, X, Y) && !ellipse(19815.133545, 8973.748871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33042.731110, 28046.496979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36799.217896, 26516.998322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11055.867317, 24214.896759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34684.306519, 20436.415710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40955.610504, 18511.251312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31804.884766, 14058.103424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21051.117386, 39879.877594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19548.037598, 39344.647583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21148.770400, 32796.885400, 528.244015, 528.244015, 0.000000, X, Y) && !ellipse(32068.995000, 31165.050800, 305.075209, 305.075209, 0.000000, X, Y) && !ellipse(27209.699000, 29166.671200, 435.842413, 435.842413, 0.000000, X, Y) && !ellipse(18651.130511, 28994.314209, 817.332453, 445.402830, 90.000000, X, Y) && !ellipse(13315.490402, 28817.007721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14120.041275, 27983.073639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19236.339813, 26744.199799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40153.619080, 25272.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17412.038800, 25024.385400, 391.084011, 391.084011, 0.000000, X, Y) && !ellipse(31243.275400, 24861.627200, 340.368010, 340.368010, 0.000000, X, Y) && !ellipse(21445.706700, 23247.795280, 317.733609, 317.733609, 0.000000, X, Y) && !ellipse(42058.881200, 22409.699000, 706.072820, 266.379208, 92.751645, X, Y) && !ellipse(13671.702408, 21415.432541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14418.475861, 19675.002426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12252.674210, 17673.367874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19163.426071, 15976.018265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22605.718018, 15303.742279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17193.060000, 14397.164000, 1993.232057, 1993.232057, 0.000000, X, Y) && !ellipse(25170.237366, 7299.823921, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 24 09:58:24 2012] Writing fullrun_pn_xmm0101440101_pi300-10000_pass1_cl_src3.gif
[Fri Aug 24 10:04:29 2012] Mean detx,y = (-3024.44, -2274.38) 
[Fri Aug 24 10:04:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 10:20:00 2012] grppha failed
[Fri Aug 24 10:20:01 2012] Setting source spectrum file to fullrun_pn_xmm0101440101_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 24 10:20:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101440101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 24 11:08:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 24 11:08:56 2012] rmf not generated due to insufficient counts
[Fri Aug 24 11:40:16 2012] Updating aperture counts using extracted products
[Fri Aug 24 11:40:16 2012] Error reading totcts from fullrun_pn_xmm0101440101_pi300-10000_pass1_cl_src3_src.pi.gz
[Fri Aug 24 11:40:19 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 11:40:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 24 11:40:27 2012] xmm0101440101/analysis//spectral/fullrun_pn_xmm0101440101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete