[Fri Aug 24 05:20:11 2012] Detection parameters:
  Position = (334.4, 399.2) = 3 25 51.54 48 58 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.3 +/- 17.5
  Background counts = 35.1
  Rate = 0.005 +/- 0.0006

[Fri Aug 24 05:20:11 2012] Off-axis axis estimate = 7.76'
[Fri Aug 24 06:15:15 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 06:15:15 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Fri Aug 24 06:15:15 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.911
[Fri Aug 24 06:15:15 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.31"
[Fri Aug 24 06:54:37 2012] fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug 24 06:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_src11.csv
[Fri Aug 24 06:54:37 2012] fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug 24 06:54:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_src11.csv
[Fri Aug 24 06:54:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 06:54:37 2012] fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug 24 06:54:37 2012] fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug 24 06:54:37 2012] Fit fullrun_mos1_xmm0101440101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Aug 24 07:43:11 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.723783 pixels away
[Fri Aug 24 07:43:11 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 07:43:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 07:43:11 2012] Assessing source extent using major
[Fri Aug 24 07:43:11 2012] Source does appear to be extended
[Fri Aug 24 07:43:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 08:32:10 2012] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 08:32:10 2012] Initial guess for spatial extent in simple fitting = 10.31"
[Fri Aug 24 08:32:10 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.911
[Fri Aug 24 08:32:10 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.31"
[Fri Aug 24 09:11:33 2012] fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_src11.ximg exists
[Fri Aug 24 09:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_src11.csv
[Fri Aug 24 09:11:33 2012] fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Aug 24 09:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_src11.csv
[Fri Aug 24 09:11:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 09:11:34 2012] fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Aug 24 09:11:34 2012] fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Aug 24 09:11:34 2012] Fit fullrun_mos1_xmm0101440101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Aug 24 09:57:56 2012] Spatial fit model total counts = 348.000000, observed total counts = 348.000000
[Fri Aug 24 09:57:56 2012] Offset between fit and detection position for source 16 = 0.357848 pixels
[Fri Aug 24 09:57:56 2012] 347.514000 total counts/ 243.532000 bgd. counts: snr = 6.663159
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.357848 pixels
  Position = (334.1, 399.3) = 3 25 51.69 48 58 54.9
  Extent = 5.7 (4.5-6.9)", rotation angle = 0
  Source counts = 104.0 +/- 18.6
  Background counts = 243.5
  Rate = 0.002 +/- 0.0003
[Fri Aug 24 09:57:56 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 09:57:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 09:57:56 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 09:57:56 2012] Source does appear to be extended
[Fri Aug 24 09:57:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 11:09:03 2012] XMMSAS src. selection expression = ellipse(29016.745640, 34692.958000, 344.636410, 344.636410, 0.000000, X, Y)
[Fri Aug 24 11:09:03 2012] Writing source region out to fullrun_mos1_xmm0101440101_pi300-10000_pass1_cl_src16_src.reg
[Fri Aug 24 11:09:03 2012] Extracting stamp from image fullrun_mos1_xmm0101440101_pi300-10000_cl_sm2.00.img.gz, (314, 380) - (354, 419)
[Fri Aug 24 11:09:03 2012] XMMSAS bgd. selection expression = annulus(29016.745640, 34692.958000, 574.394017, 1148.788033, X, Y)
[Fri Aug 24 11:09:03 2012] Writing fullrun_mos1_xmm0101440101_pi300-10000_pass1_cl_src16.gif
[Fri Aug 24 11:14:46 2012] Mean detx,y = (-10702.68, -1387.12) 
[Fri Aug 24 11:14:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 11:14:55 2012] grppha failed
[Fri Aug 24 11:14:55 2012] Setting source spectrum file to fullrun_mos1_xmm0101440101_pi300-10000_pass1_cl_src16_src.pi.gz
[Fri Aug 24 11:14:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0101440101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Aug 24 11:40:19 2012] Updating aperture counts using extracted products
[Fri Aug 24 11:40:19 2012] Error reading totcts from fullrun_mos1_xmm0101440101_pi300-10000_pass1_cl_src16_src.pi.gz
[Fri Aug 24 11:40:20 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 11:40:24 2012] Source 16 has no response, skipping
[Fri Aug 24 11:40:25 2012] xmm0101440101/analysis//spectral/fullrun_mos1_xmm0101440101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete