[Sat Dec 24 02:41:15 2011] Detection parameters:
  Position = (316.7, 311.1) = 19 21 14.24 -58 40 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211965.5 +/- 518.9
  Background counts = 116.5
  Rate = 4 +/- 0.01

[Sat Dec 24 02:41:17 2011] Off-axis axis estimate = 1.61'
[Sat Dec 24 02:45:43 2011] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 02:45:43 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Dec 24 02:45:43 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Sat Dec 24 02:45:43 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.23"
[Sat Dec 24 04:00:14 2011] fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_src3.ximg exists
[Sat Dec 24 04:00:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_src3.csv
[Sat Dec 24 04:00:14 2011] fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Dec 24 04:00:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_src3.csv
[Sat Dec 24 04:00:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 04:00:14 2011] fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Dec 24 04:00:14 2011] fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Dec 24 04:00:14 2011] Fit fullrun_mos1_xmm0101040501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Dec 24 09:07:20 2011] Spatial fit model total counts = 146463.000000, observed total counts = 149517.000000
[Sat Dec 24 09:07:20 2011] Offset between fit and detection position for source 3 = 0.249557 pixels
[Sat Dec 24 09:07:20 2011] 146562.000000 total counts/ 25600.000000 bgd. counts: snr = 756.012500
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.249557 pixels
  Position = (316.5, 311.2) = 19 21 14.35 -58 40 12.7
  Extent = 7.5 (7.4-7.5)", rotation angle = 0
  Source counts = 120962.0 +/- 382.8
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Sat Dec 24 09:07:20 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 09:07:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 09:07:20 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 09:07:20 2011] Source does appear to be extended
[Sat Dec 24 09:07:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 09:07:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 24 09:07:37 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Sat Dec 24 09:07:37 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.019
[Sat Dec 24 09:07:37 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.46"
[Sat Dec 24 09:33:29 2011] fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_src3.ximg exists
[Sat Dec 24 09:33:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_src3.csv
[Sat Dec 24 09:33:29 2011] fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Dec 24 09:33:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_src3.csv
[Sat Dec 24 09:33:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 09:33:29 2011] fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Dec 24 09:33:29 2011] fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Dec 24 09:33:30 2011] Fit fullrun_mos1_xmm0101040501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Dec 24 13:23:49 2011] Spatial fit model total counts = 146463.000000, observed total counts = 149517.000000
[Sat Dec 24 13:23:49 2011] Offset between fit and detection position for source 3 = 0.000000 pixels
[Sat Dec 24 13:23:49 2011] 146562.000000 total counts/ 25600.000000 bgd. counts: snr = 756.012500
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000000 pixels
  Position = (316.5, 311.2) = 19 21 14.35 -58 40 12.7
  Extent = 7.5 (7.4-7.5)", rotation angle = 0
  Source counts = 120962.0 +/- 382.8
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Sat Dec 24 13:23:49 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 13:23:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 13:23:49 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 13:23:49 2011] Source does appear to be extended
[Sat Dec 24 13:23:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 13:24:01 2011] Counts = 120962.000000, rescaling region sizes by 3.000000
[Sat Dec 24 13:24:01 2011] XMMSAS src. selection expression = ellipse(27487.176000, 27030.004200, 1342.659639, 1342.659639, 0.000000, X, Y)
[Sat Dec 24 13:24:01 2011] Writing source region out to fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3_src.reg
[Sat Dec 24 13:24:01 2011] Extracting stamp from image fullrun_mos1_xmm0101040501_pi300-10000_cl_sm2.00.img.gz, (239, 234) - (394, 388)
[Sat Dec 24 13:24:01 2011] XMMSAS bgd. selection expression = annulus(27487.176000, 27030.004200, 6713.298193, 13426.596386, X, Y) && !ellipse(20974.450760, 21007.184616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17973.452560, 21115.570877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24172.156097, 27601.360077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35021.091675, 27353.311310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25064.802800, 26891.718600, 373.974411, 373.974411, 0.000000, X, Y)
[Sat Dec 24 13:24:01 2011] Writing fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3.gif
[Sat Dec 24 13:26:43 2011] Mean detx,y = (149.15, -229.57) 
[Sat Dec 24 13:26:48 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 13:37:37 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 13:37:37 2011] Setting source spectrum file to fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 24 13:37:37 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Dec 24 15:47:37 2011] Updating aperture counts using extracted products
[Sat Dec 24 15:47:37 2011] Error reading totcts from fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Dec 24 15:47:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 15:47:37 2011] Using photon index=1.80, rate=3.15, arf fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3.arf
[Sat Dec 24 15:47:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 15:47:37 2011] Updating source flux to 2.8e-11
[Sat Dec 24 15:48:30 2011] Reading fit data from xmm0101040501/analysis//spectral/fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3_pl.csv
[Sat Dec 24 15:48:30 2011] Spectral fit parameter nH value = 2.16654e+20
[Sat Dec 24 15:48:30 2011] Spectral fit parameter PhoIndex value = 1.88637
[Sat Dec 24 15:48:30 2011] Failed to get F(0.3-8.0) from xmm0101040501/analysis//spectral/fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Dec 24 15:48:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 15:48:30 2011] Using Nh = 2.2e+20, photon index=1.89, rate=3.15, arf fullrun_mos1_xmm0101040501_pi300-10000_pass1_cl_src3.arf
[Sat Dec 24 15:48:30 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 15:48:30 2011] Updating source flux to 2.8e-11