[Mon Sep 26 10:12:23 2011] Detection parameters: Position = (259.2, 345.0) = 13 49 30.43 -30 13 36.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 887.4 +/- 39.9 Background counts = 39.1 Rate = 0.1 +/- 0.006 [Mon Sep 26 10:12:24 2011] Off-axis axis estimate = 4.41' [Mon Sep 26 10:15:20 2011] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting [Mon Sep 26 10:15:20 2011] Initial guess for spatial extent in simple fitting = 8.63" [Mon Sep 26 10:15:20 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.012 [Mon Sep 26 10:15:20 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 8.63" [Mon Sep 26 13:14:19 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src15.ximg exists [Mon Sep 26 13:14:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src15.csv [Mon Sep 26 13:14:19 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src15_1.ximg exists [Mon Sep 26 13:14:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src15.csv [Mon Sep 26 13:14:19 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 26 13:14:19 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Mon Sep 26 13:14:19 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Mon Sep 26 13:14:19 2011] Fit fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Mon Sep 26 14:16:56 2011] Source 15 is offset by 3.235712 and -5.537737 pixels which is larger than 2 X fitted extent = 5.344184 x 5.344184, not incorporating fit results [Mon Sep 26 14:16:56 2011] Vigneting correction estimate = 1.000000 [Mon Sep 26 14:16:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 26 14:16:56 2011] Assessing source extent using major [Mon Sep 26 14:16:56 2011] Source does appear to be extended [Mon Sep 26 14:16:56 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Sep 26 14:16:56 2011] Source is confused with source 14 [Mon Sep 26 14:17:06 2011] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting [Mon Sep 26 14:17:06 2011] Initial guess for spatial extent in simple fitting = 8.63" [Mon Sep 26 14:17:06 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.012 [Mon Sep 26 14:17:06 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 8.63" [Mon Sep 26 16:20:55 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src14.ximg exists [Mon Sep 26 16:20:55 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src14_1.ximg exists [Mon Sep 26 16:20:55 2011] Fit fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src14 appears to have run properly [Mon Sep 26 16:20:55 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists [Mon Sep 26 16:20:55 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists [Mon Sep 26 16:20:55 2011] Fit fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly [Mon Sep 26 17:44:03 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 31.968907 pixels away [Mon Sep 26 17:44:03 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 19.251432 pixels away [Mon Sep 26 17:44:03 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 30.533236 pixels away [Mon Sep 26 17:44:03 2011] Spatial fit model total counts = 3044.670000, observed total counts = 3040.000000 [Mon Sep 26 17:44:03 2011] Offset between fit and detection position for source 15 = 0.742043 pixels [Mon Sep 26 17:44:03 2011] 3033.721000 total counts/ 828.501000 bgd. counts: snr = 76.613518 Spatial fit parameters: Offset between fit and detection position for source 15 = 0.742043 pixels Position = (258.7, 345.5) = 13 49 30.61 -30 13 33.0 Extent = 37.8 (37.5-75.6)" x 5.5 (5.2-5.9)", rotation angle = 63 (63-64) degrees Source counts = 2205.2 +/- 55.1 Background counts = 828.5 Rate = 0.2 +/- 0.005 [Mon Sep 26 17:44:03 2011] Vigneting correction estimate = 1.000000 [Mon Sep 26 17:44:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 26 17:44:03 2011] Assessing source extent using major axis lower bound [Mon Sep 26 17:44:03 2011] Source does appear to be extended [Mon Sep 26 17:44:03 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.39 [Mon Sep 26 17:44:03 2011] Source is asymmetric [Mon Sep 26 17:44:11 2011] Counts = 2205.220000, rescaling region sizes by 2.000000 [Mon Sep 26 17:44:11 2011] XMMSAS src. selection expression = ellipse(22456.416800, 30005.710600, 4535.664131, 665.004019, 63.485500, X, Y) [Mon Sep 26 17:44:11 2011] Writing source region out to fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src15_src.reg [Mon Sep 26 17:44:11 2011] Extracting stamp from image fullrun_pn_xmm0101040401_pi300-10000_cl_sm2.00.img.gz, (0, 85) - (519, 595) [Mon Sep 26 17:44:11 2011] XMMSAS bgd. selection expression = annulus(22456.416800, 30005.710600, 15118.880435, 30237.760870, X, Y) && !ellipse(34189.725000, 10518.548800, 472.842414, 472.842414, 0.000000, X, Y) && !ellipse(25336.522200, 23989.659200, 2048.676059, 2048.676059, 0.000000, X, Y) && !ellipse(20055.249620, 35021.205000, 1749.888050, 449.959213, 63.452000, X, Y) && !ellipse(20273.705572, 34557.341976, 1578.464045, 401.932671, 63.182033, X, Y) && !ellipse(20361.795596, 34380.943541, 3023.776087, 483.101996, 64.162529, X, Y) && !ellipse(20728.870127, 33634.946645, 1980.400057, 447.777165, 64.078429, X, Y) && !ellipse(21108.844482, 32819.152970, 3023.776087, 466.113853, 63.980310, X, Y) && !ellipse(20962.722000, 33184.426000, 1511.888044, 1511.888044, 0.000000, X, Y) && !ellipse(21791.293800, 31385.744600, 1483.288043, 430.574412, 62.968500, X, Y) && !ellipse(32960.332275, 9513.909935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21584.232800, 31821.068600, 1514.288044, 419.169612, 64.015000, X, Y) && !ellipse(22029.607751, 30888.529126, 3023.776087, 444.524728, 63.939856, X, Y) && !ellipse(22282.654101, 30360.639237, 3023.776087, 438.280251, 64.156388, X, Y) && !ellipse(22823.056000, 29148.370000, 1288.880037, 1288.880037, 0.000000, X, Y) && !ellipse(23175.976000, 28578.314000, 2018.824058, 2018.824058, 0.000000, X, Y) && !ellipse(23423.593425, 27983.301112, 1084.784031, 690.249809, 90.000000, X, Y) && !ellipse(28971.887200, 27122.798400, 621.776018, 621.776018, 0.000000, X, Y) && !ellipse(23896.598161, 27011.931246, 1084.784031, 656.347825, 90.000000, X, Y) && !ellipse(20108.322800, 26593.564800, 443.426413, 443.426413, 0.000000, X, Y) && !ellipse(24060.806000, 26627.808400, 1416.736041, 414.997612, 66.469400, X, Y) && !ellipse(28914.544920, 24982.188000, 657.190419, 616.621618, 19.698926, X, Y) && !ellipse(29062.197021, 24225.378815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.734253, 23531.986053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27449.192000, 22713.832000, 1229.384035, 1229.384035, 0.000000, X, Y) && !ellipse(26129.133057, 22768.165985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.050800, 21847.604000, 1277.400037, 1277.400037, 0.000000, X, Y) && !ellipse(25896.104378, 21302.897895, 1635.824047, 402.849468, 86.688759, X, Y) && !ellipse(28613.943115, 18560.062698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19387.727600, 36408.691600, 1635.824047, 446.812013, 64.289700, X, Y) [Mon Sep 26 17:44:11 2011] Writing fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src15.gif [Mon Sep 26 18:44:51 2011] Mean detx,y = (369.58, 6589.57) [Mon Sep 26 18:44:54 2011] Setting backscal keywords in source and bgd. spectrum [Mon Sep 26 18:50:48 2011] Binned source spectrum to 10 counts/bin [Mon Sep 26 18:50:48 2011] Setting source spectrum file to fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Mon Sep 26 18:50:48 2011] Setting bgd. spectrum file to fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src15_bgd.pi.gz [Tue Sep 27 03:39:44 2011] Updating aperture counts using extracted products [Tue Sep 27 03:39:44 2011] Error reading totcts from fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Tue Sep 27 03:39:45 2011] Calculating source flux in energy range 0.30-8.00 [Tue Sep 27 03:39:45 2011] Using photon index=1.80, rate=0.211, arf fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src15.arf [Tue Sep 27 03:39:45 2011] Assuming count rate is from the 0.30-10.00 bandpass [Tue Sep 27 03:39:45 2011] Updating source flux to 6.4e-13 [Tue Sep 27 03:41:15 2011] Flag b found in src. 15 procflags, skipping spectral fitting [Tue Sep 27 03:41:15 2011] Flag c found in src. 15 procflags, skipping spectral fitting