[Mon Sep 26 10:12:23 2011] Detection parameters:
  Position = (394.7, 121.6) = 13 48 44.87 -30 29 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1310.0 +/- 40.7
  Background counts = 22.8
  Rate = 0.1 +/- 0.004

[Mon Sep 26 10:12:24 2011] Off-axis axis estimate = 14.60'
[Mon Sep 26 10:15:20 2011] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 10:15:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 10:15:20 2011] Initial guess for spatial extent in simple fitting = 13.73"
[Mon Sep 26 10:15:20 2011] source mask rpix=3.2, npix_max = 53, mask sum = 40, frac = 0.748
[Mon Sep 26 10:15:20 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 13.73"
[Mon Sep 26 13:14:18 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep 26 13:14:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 13:14:18 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep 26 13:14:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 13:14:18 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 13:14:19 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 13:14:19 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 13:14:19 2011] Fit fullrun_pn_xmm0101040401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 14:16:56 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.980963 pixels away
[Mon Sep 26 14:16:56 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.341800 pixels away
[Mon Sep 26 14:16:56 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 14:16:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 14:16:56 2011] Assessing source extent using major
[Mon Sep 26 14:16:56 2011] Source does appear to be extended
[Mon Sep 26 14:16:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 14:17:06 2011] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 14:17:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 14:17:06 2011] Initial guess for spatial extent in simple fitting = 13.73"
[Mon Sep 26 14:17:06 2011] source mask rpix=3.2, npix_max = 53, mask sum = 40, frac = 0.748
[Mon Sep 26 14:17:06 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 13.73"
[Mon Sep 26 16:20:55 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Sep 26 16:20:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src1.csv
[Mon Sep 26 16:20:55 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Sep 26 16:20:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src1.csv
[Mon Sep 26 16:20:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 16:20:55 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 16:20:55 2011] fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 16:20:55 2011] Fit fullrun_pn_xmm0101040401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 17:44:03 2011] Spatial fit model total counts = 1582.240000, observed total counts = 1569.000000
[Mon Sep 26 17:44:03 2011] Offset between fit and detection position for source 1 = 1.177797 pixels
[Mon Sep 26 17:44:03 2011] 1566.840000 total counts/ 505.620000 bgd. counts: snr = 47.194708
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.177797 pixels
  Position = (393.5, 121.5) = 13 48 45.26 -30 29 47.2
  Extent = 5.9 (5.6-6.2)", rotation angle = 0
  Source counts = 1061.2 +/- 39.6
  Background counts = 505.6
  Rate = 0.1 +/- 0.004
[Mon Sep 26 17:44:03 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 17:44:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 17:44:03 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 17:44:03 2011] Source does appear to be extended
[Mon Sep 26 17:44:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 17:44:11 2011] Counts = 1061.220000, rescaling region sizes by 2.000000
[Mon Sep 26 17:44:11 2011] XMMSAS src. selection expression = ellipse(34189.725000, 10518.548800, 709.263620, 709.263620, 0.000000, X, Y)
[Mon Sep 26 17:44:11 2011] Writing source region out to fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1_src.reg
[Mon Sep 26 17:44:11 2011] Extracting stamp from image fullrun_pn_xmm0101040401_pi300-10000_cl_sm2.00.img.gz, (353, 81) - (434, 162)
[Mon Sep 26 17:44:11 2011] XMMSAS bgd. selection expression = annulus(34189.725000, 10518.548800, 2364.212068, 4728.424136, X, Y) && !ellipse(32960.332275, 9513.909935, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Sep 26 17:44:11 2011] Writing fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1.gif
[Mon Sep 26 17:44:19 2011] Mean detx,y = (-1814.65, -15984.12) 
[Mon Sep 26 17:44:20 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 17:44:55 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 17:44:55 2011] Setting source spectrum file to fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 17:44:55 2011] Setting bgd. spectrum file to fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Sep 27 03:39:44 2011] Updating aperture counts using extracted products
[Tue Sep 27 03:39:44 2011] Error reading totcts from fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Sep 27 03:39:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 03:39:44 2011] Using photon index=1.80, rate=0.102, arf fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1.arf
[Tue Sep 27 03:39:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 03:39:44 2011] Updating source flux to 2.3e-12
[Tue Sep 27 03:45:01 2011] Reading fit data from xmm0101040401/analysis//spectral/fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Sep 27 03:45:01 2011] Spectral fit parameter nH value = 8.26734e+19
[Tue Sep 27 03:45:01 2011] Spectral fit parameter PhoIndex value = 2.38612
[Tue Sep 27 03:45:01 2011] Failed to get F(0.3-8.0) from xmm0101040401/analysis//spectral/fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Sep 27 03:45:01 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 03:45:01 2011] Using Nh = 8.3e+19, photon index=2.39, rate=0.102, arf fullrun_pn_xmm0101040401_pi300-10000_pass1_cl_src1.arf
[Tue Sep 27 03:45:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 03:45:01 2011] Updating source flux to 1.7e-12