[Sat Sep 24 02:18:43 2011] Detection parameters:
  Position = (300.0, 285.9) = 10 23 28.49 19 52 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 319.5 +/- 24.6
  Background counts = 21.6
  Rate = 0.009 +/- 0.0007

[Sat Sep 24 02:18:44 2011] Off-axis axis estimate = 0.92'
[Sat Sep 24 05:08:58 2011] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 05:08:58 2011] Initial guess for spatial extent in simple fitting = 6.89"
[Sat Sep 24 05:08:58 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.922
[Sat Sep 24 05:08:58 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 6.89"
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src3.ximg exists
[Sat Sep 24 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src3.csv
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Sep 24 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src3.csv
[Sat Sep 24 05:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Sep 24 05:55:28 2011] Fit fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Sep 24 05:55:55 2011] Source 4 is offset by 5.970441 and 5.215488 pixels which is larger than
2 X fitted extent = 4.118552 x 4.118552, not incorporating fit results
[Sat Sep 24 05:55:55 2011] Source 4 is offset by 4.176648 and 9.023189 pixels which is larger than
2 X fitted extent = 1.115168 x 8.344092, not incorporating fit results
[Sat Sep 24 05:55:55 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:55:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:55:55 2011] Assessing source extent using major
[Sat Sep 24 05:55:55 2011] Source does appear to be extended
[Sat Sep 24 05:55:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:20:16 2011] Using EEF radius (= 6.89 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:20:16 2011] Initial guess for spatial extent in simple fitting = 6.89"
[Sat Sep 24 08:20:16 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.922
[Sat Sep 24 08:20:16 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 6.89"
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src3.ximg exists
[Sat Sep 24 09:00:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src3.csv
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Sep 24 09:00:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src3.csv
[Sat Sep 24 09:00:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Sep 24 09:00:21 2011] Fit fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Sep 24 09:00:38 2011] Source 4 is offset by 5.965291 and 5.215488 pixels which is larger than
2 X fitted extent = 4.114910 x 4.114910, not incorporating fit results
[Sat Sep 24 09:00:38 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 09:00:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 09:00:38 2011] Assessing source extent using major
[Sat Sep 24 09:00:38 2011] Source does appear to be extended
[Sat Sep 24 09:00:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 11:12:56 2011] XMMSAS src. selection expression = ellipse(26049.142334, 24823.283447, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 11:12:56 2011] Writing source region out to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src4_src.reg
[Sat Sep 24 11:12:56 2011] Extracting stamp from image fullrun_mos2_xmm0101040301_pi300-10000_cl_sm2.00.img.gz, (262, 248) - (337, 323)
[Sat Sep 24 11:12:56 2011] XMMSAS bgd. selection expression = annulus(26049.142334, 24823.283447, 1087.500000, 2175.000000, X, Y) && !ellipse(25442.168136, 24016.560800, 464.340813, 429.212812, 333.575475, X, Y) && !ellipse(26451.216600, 26413.060600, 432.475630, 432.475630, 0.000000, X, Y) && !ellipse(24965.409821, 23160.542145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23958.271140, 23947.860200, 380.704811, 380.704811, 0.000000, X, Y)
[Sat Sep 24 11:12:56 2011] Writing fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src4.gif
[Sat Sep 24 11:14:03 2011] Mean detx,y = (736.93, -477.61) 
[Sat Sep 24 11:14:04 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 11:14:13 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 11:14:13 2011] Setting source spectrum file to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Sep 24 11:14:13 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Sep 24 11:29:37 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep 24 11:29:37 2011] rmf not generated due to insufficient counts
[Sat Sep 24 11:39:09 2011] Updating aperture counts using extracted products
[Sat Sep 24 11:39:09 2011] Error reading totcts from fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Sep 24 11:39:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 11:39:09 2011] Using photon index=1.80, rate=0.00872, arf fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src4.arf
[Sat Sep 24 11:39:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 11:39:09 2011] Updating source flux to 9.6e-14
[Sat Sep 24 11:39:52 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting