[Sat Sep 24 02:18:44 2011] Detection parameters:
  Position = (254.6, 209.8) = 10 23 42.48 19 47 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.7 +/- 10.7
  Background counts = 16.1
  Rate = 0.002 +/- 0.0004

[Sat Sep 24 02:18:44 2011] Off-axis axis estimate = 7.17'
[Sat Sep 24 05:08:58 2011] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 05:08:58 2011] Initial guess for spatial extent in simple fitting = 10.01"
[Sat Sep 24 05:08:58 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.955
[Sat Sep 24 05:08:58 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 10.01"
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src21.ximg exists
[Sat Sep 24 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src21.csv
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src21_1.ximg exists
[Sat Sep 24 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src21.csv
[Sat Sep 24 05:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sat Sep 24 05:55:28 2011] Fit fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sat Sep 24 05:55:55 2011] Source 32 is offset by -6.916538 and 0.319724 pixels which is larger than
2 X fitted extent = 1.435149 x 1.435149, not incorporating fit results
[Sat Sep 24 05:55:55 2011] Spatial fit model total counts = 211.125000, observed total counts = 210.000000
[Sat Sep 24 05:55:55 2011] Offset between fit and detection position for source 32 = 0.175989 pixels
[Sat Sep 24 05:55:55 2011] 207.682700 total counts/ 174.431000 bgd. counts: snr = 2.517689
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.175989 pixels
  Position = (254.7, 209.8) = 10 23 42.43 19 47 3.8
  Extent = 3.6 (2.5-4.8)", rotation angle = 0
  Source counts = 33.3 +/- 14.4
  Background counts = 174.4
  Rate = 0.0009 +/- 0.0004
[Sat Sep 24 05:55:55 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:55:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:55:55 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 05:55:55 2011] Source does appear to be extended
[Sat Sep 24 05:55:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:20:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:20:16 2011] Initial guess for spatial extent in simple fitting = 3.56"
[Sat Sep 24 08:20:16 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.863
[Sat Sep 24 08:20:16 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 3.56"
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src20.ximg exists
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Sep 24 09:00:21 2011] Fit fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src20 appears to have run properly
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Sep 24 09:00:21 2011] Fit fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Sep 24 09:00:38 2011] Spatial fit model total counts = 201.220000, observed total counts = 201.000000
[Sat Sep 24 09:00:38 2011] Offset between fit and detection position for source 32 = 0.047730 pixels
[Sat Sep 24 09:00:38 2011] 197.349000 total counts/ 165.759000 bgd. counts: snr = 2.453641
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.047730 pixels
  Position = (254.8, 209.8) = 10 23 42.42 19 47 3.6
  Extent = 4.2 (2.9-6.3)" x 2.1 (0.9-4.1)", rotation angle = 49 (90-250) degrees
  Source counts = 31.6 +/- 14.0
  Background counts = 165.8
  Rate = 0.0009 +/- 0.0004
[Sat Sep 24 09:00:38 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 09:00:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 09:00:38 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 09:00:38 2011] Source does appear to be extended
[Sat Sep 24 09:00:38 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.70
[Sat Sep 24 11:12:57 2011] XMMSAS src. selection expression = ellipse(22115.587800, 18203.443000, 251.191207, 126.402604, 48.930000, X, Y)
[Sat Sep 24 11:12:57 2011] Writing source region out to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src32_src.reg
[Sat Sep 24 11:12:57 2011] Extracting stamp from image fullrun_mos2_xmm0101040301_pi300-10000_cl_sm2.00.img.gz, (240, 195) - (269, 224)
[Sat Sep 24 11:12:57 2011] XMMSAS bgd. selection expression = annulus(22115.587800, 18203.443000, 418.652012, 837.304024, X, Y) && !ellipse(21862.795685, 17280.837723, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep 24 11:12:57 2011] Writing fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src32.gif
[Sat Sep 24 11:18:27 2011] Mean detx,y = (-5363.28, 3914.54) 
[Sat Sep 24 11:18:28 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 11:18:35 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 11:18:35 2011] Setting source spectrum file to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Sep 24 11:18:35 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat Sep 24 11:37:32 2011] Not generating rmf since there are only 31 counts
[Sat Sep 24 11:37:32 2011] rmf not generated due to insufficient counts
[Sat Sep 24 11:39:09 2011] Updating aperture counts using extracted products
[Sat Sep 24 11:39:09 2011] Error reading totcts from fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Sep 24 11:39:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 11:39:09 2011] Using photon index=1.80, rate=0.000859, arf fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src32.arf
[Sat Sep 24 11:39:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 11:39:09 2011] Updating source flux to 2.1e-14
[Sat Sep 24 11:39:52 2011] Flag b found in src. 32 procflags, skipping spectral fitting
[Sat Sep 24 11:39:52 2011] Source 32 has fewer than 100.000000 counts, skipping spectral fitting