[Sat Sep 24 02:18:44 2011] Detection parameters:
  Position = (287.5, 266.8) = 10 23 32.33 19 51 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.9 +/- 12.5
  Background counts = 20.1
  Rate = 0.002 +/- 0.0004

[Sat Sep 24 02:18:44 2011] Off-axis axis estimate = 2.43'
[Sat Sep 24 05:08:58 2011] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 05:08:58 2011] Initial guess for spatial extent in simple fitting = 7.64"
[Sat Sep 24 05:08:58 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785
[Sat Sep 24 05:08:58 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 7.64"
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src23.ximg exists
[Sat Sep 24 05:55:28 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src23.csv
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Sep 24 05:55:28 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src23.csv
[Sat Sep 24 05:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Sep 24 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Sep 24 05:55:28 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Sep 24 05:55:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Sep 24 05:55:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:55:55 2011] Warning, spatial fit 23 centroid is now closest to src. 4
[Sat Sep 24 05:55:55 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:55:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:55:55 2011] Assessing source extent using major
[Sat Sep 24 05:55:55 2011] Source does appear to be extended
[Sat Sep 24 05:55:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:20:16 2011] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:20:16 2011] Initial guess for spatial extent in simple fitting = 7.64"
[Sat Sep 24 08:20:16 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785
[Sat Sep 24 08:20:16 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 7.64"
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src22.ximg exists
[Sat Sep 24 09:00:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src22.csv
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Sep 24 09:00:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src22.csv
[Sat Sep 24 09:00:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Sep 24 09:00:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat Sep 24 09:00:21 2011] fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Sep 24 09:00:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat Sep 24 09:00:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 09:00:38 2011] Source 24 is offset by -5.474462 and -8.257286 pixels which is larger than
2 X fitted extent = 2.439582 x 2.392501, not incorporating fit results
[Sat Sep 24 09:00:38 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 09:00:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 09:00:38 2011] Assessing source extent using major
[Sat Sep 24 09:00:38 2011] Source does appear to be extended
[Sat Sep 24 09:00:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 11:12:57 2011] XMMSAS src. selection expression = ellipse(24965.409821, 23160.542145, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 11:12:57 2011] Writing source region out to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src24_src.reg
[Sat Sep 24 11:12:57 2011] Extracting stamp from image fullrun_mos2_xmm0101040301_pi300-10000_cl_sm2.00.img.gz, (250, 229) - (325, 304)
[Sat Sep 24 11:12:57 2011] XMMSAS bgd. selection expression = annulus(24965.409821, 23160.542145, 1087.500000, 2175.000000, X, Y) && !ellipse(25442.168136, 24016.560800, 464.340813, 429.212812, 333.575475, X, Y) && !ellipse(26049.142334, 24823.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26118.438599, 21689.009415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23958.271140, 23947.860200, 380.704811, 380.704811, 0.000000, X, Y)
[Sat Sep 24 11:12:57 2011] Writing fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src24.gif
[Sat Sep 24 11:19:05 2011] Mean detx,y = (-579.75, 387.17) 
[Sat Sep 24 11:19:06 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 11:19:14 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 11:19:14 2011] Setting source spectrum file to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Sep 24 11:19:14 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Sep 24 11:37:39 2011] Not generating rmf since there are only 60 counts
[Sat Sep 24 11:37:39 2011] rmf not generated due to insufficient counts
[Sat Sep 24 11:39:09 2011] Updating aperture counts using extracted products
[Sat Sep 24 11:39:09 2011] Error reading totcts from fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Sep 24 11:39:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 11:39:09 2011] Using photon index=1.80, rate=0.00195, arf fullrun_mos2_xmm0101040301_pi300-10000_pass1_cl_src24.arf
[Sat Sep 24 11:39:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 11:39:09 2011] Updating source flux to 1.9e-14
[Sat Sep 24 11:39:52 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting