[Sat Sep 24 02:18:18 2011] Detection parameters:
  Position = (462.4, 371.5) = 10 22 38.37 19 58 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.3 +/- 9.6
  Background counts = 11.6
  Rate = 0.001 +/- 0.0003

[Sat Sep 24 02:18:18 2011] Off-axis axis estimate = 13.01'
[Sat Sep 24 04:15:31 2011] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 04:15:31 2011] Initial guess for spatial extent in simple fitting = 12.94"
[Sat Sep 24 04:15:31 2011] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.995
[Sat Sep 24 04:15:31 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 12.94"
[Sat Sep 24 05:08:57 2011] fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_src33.ximg exists
[Sat Sep 24 05:08:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_src33.csv
[Sat Sep 24 05:08:57 2011] fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat Sep 24 05:08:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_src33.csv
[Sat Sep 24 05:08:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 05:08:57 2011] fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat Sep 24 05:08:57 2011] fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat Sep 24 05:08:57 2011] Fit fullrun_mos1_xmm0101040301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat Sep 24 05:55:49 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.910591 pixels away
[Sat Sep 24 05:55:49 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 05:55:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 05:55:49 2011] Assessing source extent using major
[Sat Sep 24 05:55:49 2011] Source does appear to be extended
[Sat Sep 24 05:55:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 07:42:22 2011] Using EEF radius (= 12.94 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 07:42:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 07:42:22 2011] Initial guess for spatial extent in simple fitting = 12.94"
[Sat Sep 24 07:42:22 2011] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.995
[Sat Sep 24 07:42:22 2011] Giving source the simple spatial ID 30 for pass 1, mean size = 12.94"
[Sat Sep 24 08:20:15 2011] fullrun_mos1_xmm0101040301_pi300-10000_cl_pass1_src30.ximg exists
[Sat Sep 24 08:20:15 2011] fullrun_mos1_xmm0101040301_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Sep 24 08:20:15 2011] Fit fullrun_mos1_xmm0101040301_pi300-10000_cl_pass1_src30 appears to have run properly
[Sat Sep 24 08:20:16 2011] fullrun_mos1_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Sep 24 08:20:16 2011] fullrun_mos1_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Sep 24 08:20:16 2011] Fit fullrun_mos1_xmm0101040301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Sep 24 09:00:34 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 16.755328 pixels away
[Sat Sep 24 09:00:34 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 09:00:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 09:00:34 2011] Assessing source extent using major
[Sat Sep 24 09:00:34 2011] Source does appear to be extended
[Sat Sep 24 09:00:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 10:39:46 2011] XMMSAS src. selection expression = ellipse(40179.192322, 32272.249573, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep 24 10:39:46 2011] Writing source region out to fullrun_mos1_xmm0101040301_pi300-10000_pass1_cl_src10_src.reg
[Sat Sep 24 10:39:46 2011] Extracting stamp from image fullrun_mos1_xmm0101040301_pi300-10000_cl_sm2.00.img.gz, (425, 334) - (500, 409)
[Sat Sep 24 10:39:46 2011] XMMSAS bgd. selection expression = annulus(40179.192322, 32272.249573, 1087.500000, 2175.000000, X, Y)
[Sat Sep 24 10:39:46 2011] Writing fullrun_mos1_xmm0101040301_pi300-10000_pass1_cl_src10.gif
[Sat Sep 24 10:47:01 2011] Mean detx,y = (-1419.01, -16892.30) 
[Sat Sep 24 10:47:02 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Sep 24 10:47:22 2011] Binned source spectrum to 10 counts/bin
[Sat Sep 24 10:47:22 2011] Setting source spectrum file to fullrun_mos1_xmm0101040301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Sep 24 10:47:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0101040301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Sep 24 11:12:35 2011] Not generating rmf since there are only 51 counts
[Sat Sep 24 11:12:35 2011] rmf not generated due to insufficient counts
[Sat Sep 24 11:39:08 2011] Updating aperture counts using extracted products
[Sat Sep 24 11:39:08 2011] Error reading totcts from fullrun_mos1_xmm0101040301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Sep 24 11:39:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 11:39:08 2011] Using photon index=1.80, rate=0.00138, arf fullrun_mos1_xmm0101040301_pi300-10000_pass1_cl_src10.arf
[Sat Sep 24 11:39:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Sep 24 11:39:08 2011] Updating source flux to 5.3e-14
[Sat Sep 24 11:39:11 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting