[Tue Sep  4 10:43:15 2012] Detection parameters:
  Position = (309.7, 403.0) = 1 23 29.92 -58 39 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 524.8 +/- 29.2
  Background counts = 22.7
  Rate = 0.04 +/- 0.002

[Tue Sep  4 10:43:17 2012] Off-axis axis estimate = 7.63'
[Tue Sep  4 10:46:37 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 10:46:37 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Tue Sep  4 10:46:37 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.105
[Tue Sep  4 10:46:37 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.24"
[Tue Sep  4 13:15:03 2012] fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_src13.ximg exists
[Tue Sep  4 13:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_src13.csv
[Tue Sep  4 13:15:03 2012] fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Sep  4 13:15:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_src13.csv
[Tue Sep  4 13:15:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 13:15:04 2012] fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Sep  4 13:15:04 2012] fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Sep  4 13:15:04 2012] Fit fullrun_pn_xmm0101040201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Sep  4 15:12:27 2012] Spatial fit model total counts = 1689.840000, observed total counts = 1698.000000
[Tue Sep  4 15:12:27 2012] Offset between fit and detection position for source 13 = 1.714084 pixels
[Tue Sep  4 15:12:27 2012] Warning, changing simple spatial fit ID from 13 to 12
[Tue Sep  4 15:12:27 2012] 1345.075000 total counts/ 529.866000 bgd. counts: snr = 35.414893
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.714084 pixels
  Position = (309.7, 404.7) = 1 23 29.95 -58 39 39.3
  Extent = 13.4 (12.3-14.5)", rotation angle = 0
  Source counts = 815.2 +/- 36.7
  Background counts = 529.9
  Rate = 0.03 +/- 0.001
[Tue Sep  4 15:12:27 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 15:12:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 15:12:27 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 15:12:27 2012] Source does appear to be extended
[Tue Sep  4 15:12:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 15:12:27 2012] Source is confused with source 12
[Tue Sep  4 15:12:27 2012] Source is confused with source 14
[Tue Sep  4 15:12:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 15:12:48 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Tue Sep  4 15:12:48 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.950
[Tue Sep  4 15:12:48 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.45"
[Tue Sep  4 17:27:26 2012] fullrun_pn_xmm0101040201_pi300-10000_cl_pass1_src11.ximg exists
[Tue Sep  4 17:27:26 2012] fullrun_pn_xmm0101040201_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Sep  4 17:27:26 2012] Fit fullrun_pn_xmm0101040201_pi300-10000_cl_pass1_src11 appears to have run properly
[Tue Sep  4 17:27:27 2012] fullrun_pn_xmm0101040201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Sep  4 17:27:27 2012] fullrun_pn_xmm0101040201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Sep  4 17:27:27 2012] Fit fullrun_pn_xmm0101040201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Sep  4 18:13:38 2012] Spatial fit model total counts = 1353.630000, observed total counts = 1357.000000
[Tue Sep  4 18:13:38 2012] Offset between fit and detection position for source 13 = 0.708472 pixels
[Tue Sep  4 18:13:38 2012] Warning, changing simple spatial fit ID from 11 to 10
[Tue Sep  4 18:13:38 2012] 844.781000 total counts/ 206.616000 bgd. counts: snr = 44.396732
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.708472 pixels
  Position = (309.9, 405.4) = 1 23 29.81 -58 39 36.4
  Extent = 11.5 (10.3-12.9)", rotation angle = 0
  Source counts = 638.2 +/- 29.1
  Background counts = 206.6
  Rate = 0.02 +/- 0.001
[Tue Sep  4 18:13:38 2012] Spatial fit model total counts = 1686.220000, observed total counts = 1683.000000
[Tue Sep  4 18:13:38 2012] Offset between fit and detection position for source 13 = 0.203960 pixels
[Tue Sep  4 18:13:38 2012] Warning, changing simple spatial fit ID from 10 to 11
[Tue Sep  4 18:13:38 2012] 1602.835000 total counts/ 488.785000 bgd. counts: snr = 50.390161
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.203960 pixels
  Position = (310.0, 405.2) = 1 23 29.77 -58 39 37.2
  Extent = 26.9" x 6.0", rotation angle = 104
  Source counts = 1114.0 +/- 40.0
  Background counts = 488.8
  Rate = 0.04 +/- 0.001
[Tue Sep  4 18:13:38 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 18:13:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 18:13:38 2012] Assessing source extent using major
[Tue Sep  4 18:13:38 2012] Source does appear to be extended
[Tue Sep  4 18:13:38 2012] Computing asymmetry using major and minor axis, asym = 4.50
[Tue Sep  4 18:13:38 2012] Source is asymmetric
[Tue Sep  4 18:13:48 2012] Counts = 1114.050000, rescaling region sizes by 2.000000
[Tue Sep  4 18:13:48 2012] XMMSAS src. selection expression = ellipse(26922.526435, 35205.505526, 3227.016093, 717.291850, 103.519997, X, Y)
[Tue Sep  4 18:13:48 2012] Writing source region out to fullrun_pn_xmm0101040201_pi300-10000_pass1_cl_src13_src.reg
[Tue Sep  4 18:13:48 2012] Extracting stamp from image fullrun_pn_xmm0101040201_pi300-10000_cl_sm2.00.img.gz, (125, 220) - (495, 591)
[Tue Sep  4 18:13:48 2012] XMMSAS bgd. selection expression = annulus(26922.526435, 35205.505526, 10756.720310, 21513.440619, X, Y) && !ellipse(24426.707600, 24721.595800, 1517.199880, 1517.199880, 0.000000, X, Y) && !ellipse(27749.935516, 38571.566772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27620.469034, 38128.248999, 2151.344062, 379.899594, 105.263154, X, Y) && !ellipse(27420.279114, 37272.301636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27319.592438, 36838.573395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35295.236725, 36616.660736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27816.656403, 36479.966553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27115.167200, 36115.100000, 622.308018, 622.308018, 0.000000, X, Y) && !ellipse(26976.284200, 35715.902000, 1244.552036, 1244.552036, 0.000000, X, Y) && !ellipse(26819.194600, 34759.050400, 2151.344062, 462.835213, 103.723000, X, Y) && !ellipse(26605.483600, 33820.988000, 1481.720043, 1481.720043, 0.000000, X, Y) && !ellipse(26321.585510, 32661.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36489.328186, 32071.107208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27569.534000, 32066.066600, 457.093613, 457.093613, 0.000000, X, Y) && !ellipse(26162.947000, 32017.837000, 1432.600041, 445.821613, 105.889400, X, Y) && !ellipse(35410.390656, 31816.330597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26050.782600, 31623.128000, 1225.280035, 1225.280035, 0.000000, X, Y) && !ellipse(25949.967800, 31270.154000, 1165.360034, 1165.360034, 0.000000, X, Y) && !ellipse(25039.254150, 31021.361725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25694.302558, 30085.240233, 1310.304038, 431.545941, 104.342249, X, Y) && !ellipse(25498.499060, 29182.255000, 1641.536047, 460.595213, 104.077000, X, Y) && !ellipse(41399.126722, 29031.290878, 881.059101, 370.675957, 75.250569, X, Y) && !ellipse(14931.760120, 28860.421800, 702.214420, 363.776810, 121.431495, X, Y) && !ellipse(25409.712200, 28800.242000, 1199.432035, 1199.432035, 0.000000, X, Y) && !ellipse(25134.520000, 28004.184000, 1067.296031, 1067.296031, 0.000000, X, Y) && !ellipse(25097.381860, 27560.688000, 1158.392033, 398.692811, 104.730900, X, Y) && !ellipse(20093.307602, 26468.929016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15806.083115, 24315.076324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33132.513580, 23883.681854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19503.284424, 23773.808777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24339.332672, 23230.196838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23160.818268, 23479.485504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17481.573400, 22474.790000, 381.465611, 381.465611, 0.000000, X, Y) && !ellipse(23697.712700, 22429.585200, 397.564811, 397.564811, 0.000000, X, Y) && !ellipse(28477.333893, 19783.328949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11732.782400, 19696.438120, 476.204814, 476.204814, 0.000000, X, Y) && !ellipse(22305.455444, 18757.833176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12035.678665, 18121.595230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22010.376816, 17372.203918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20475.048180, 16795.173400, 607.404817, 346.502410, 9.836063, X, Y) && !ellipse(21919.000000, 15701.618332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38039.065838, 15448.145786, 946.815283, 337.405844, 114.531423, X, Y) && !ellipse(21627.505661, 13947.636948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21149.322937, 40179.168427, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 18:13:48 2012] Writing fullrun_pn_xmm0101040201_pi300-10000_pass1_cl_src13.gif
[Tue Sep  4 18:21:54 2012] Mean detx,y = (79.21, 10677.99) 
[Tue Sep  4 18:22:00 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 18:27:34 2012] grppha failed
[Tue Sep  4 18:27:34 2012] Setting source spectrum file to fullrun_pn_xmm0101040201_pi300-10000_pass1_cl_src13_src.pi.gz
[Tue Sep  4 18:27:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101040201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Sep  4 19:02:29 2012] Updating aperture counts using extracted products
[Tue Sep  4 19:02:29 2012] Error reading totcts from fullrun_pn_xmm0101040201_pi300-10000_pass1_cl_src13_src.pi.gz
[Tue Sep  4 19:02:29 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 19:02:33 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Tue Sep  4 19:02:33 2012] Source 13 has no response, skipping
[Tue Sep  4 19:02:34 2012] xmm0101040201/analysis//spectral/fullrun_pn_xmm0101040201_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete