[Tue Sep  4 10:43:44 2012] Detection parameters:
  Position = (272.7, 258.8) = 1 23 50.65 -58 50 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 424.5 +/- 25.6
  Background counts = 4.0
  Rate = 0.02 +/- 0.001

[Tue Sep  4 10:43:44 2012] Off-axis axis estimate = 3.42'
[Tue Sep  4 13:15:05 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Tue Sep  4 13:15:05 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Tue Sep  4 13:15:05 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.800
[Tue Sep  4 13:15:05 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.14"
[Tue Sep  4 13:47:26 2012] fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_src2.ximg exists
[Tue Sep  4 13:47:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_src2.csv
[Tue Sep  4 13:47:26 2012] fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Sep  4 13:47:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_src2.csv
[Tue Sep  4 13:47:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 13:47:26 2012] fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Sep  4 13:47:26 2012] fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Sep  4 13:47:26 2012] Fit fullrun_mos1_xmm0101040201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Sep  4 15:12:32 2012] Spatial fit model total counts = 660.254000, observed total counts = 639.000000
[Tue Sep  4 15:12:32 2012] Offset between fit and detection position for source 1 = 0.466721 pixels
[Tue Sep  4 15:12:32 2012] 680.904000 total counts/ 394.264000 bgd. counts: snr = 14.435879
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.466721 pixels
  Position = (272.7, 258.4) = 1 23 50.67 -58 50 15.9
  Extent = 4.5 (4.0-5.1)", rotation angle = 0
  Source counts = 286.6 +/- 26.1
  Background counts = 394.3
  Rate = 0.01 +/- 0.0009
[Tue Sep  4 15:12:32 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 15:12:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 15:12:32 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 15:12:32 2012] Source does appear to be extended
[Tue Sep  4 15:12:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 17:27:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep  4 17:27:28 2012] Initial guess for spatial extent in simple fitting = 4.50"
[Tue Sep  4 17:27:28 2012] source mask rpix=1.0, npix_max = 9, mask sum = 6, frac = 0.638
[Tue Sep  4 17:27:28 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.50"
[Tue Sep  4 17:34:32 2012] fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_src2.ximg exists
[Tue Sep  4 17:34:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_src2.csv
[Tue Sep  4 17:34:32 2012] fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Sep  4 17:34:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_src2.csv
[Tue Sep  4 17:34:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 17:34:32 2012] fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep  4 17:34:32 2012] fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep  4 17:34:32 2012] Fit fullrun_mos1_xmm0101040201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep  4 18:13:39 2012] Spatial fit model total counts = 611.048000, observed total counts = 598.000000
[Tue Sep  4 18:13:39 2012] Offset between fit and detection position for source 1 = 0.004307 pixels
[Tue Sep  4 18:13:39 2012] 630.064000 total counts/ 341.085000 bgd. counts: snr = 15.647140
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004307 pixels
  Position = (272.7, 258.4) = 1 23 50.66 -58 50 15.9
  Extent = 4.5 (4.0-5.1)", rotation angle = 0
  Source counts = 289.0 +/- 25.1
  Background counts = 341.1
  Rate = 0.01 +/- 0.0009
[Tue Sep  4 18:13:39 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 18:13:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 18:13:39 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 18:13:39 2012] Source does appear to be extended
[Tue Sep  4 18:13:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 18:56:51 2012] XMMSAS src. selection expression = ellipse(23673.146400, 22431.113200, 271.845008, 271.845008, 0.000000, X, Y)
[Tue Sep  4 18:56:51 2012] Writing source region out to fullrun_mos1_xmm0101040201_pi300-10000_pass1_cl_src1_src.reg
[Tue Sep  4 18:56:51 2012] Extracting stamp from image fullrun_mos1_xmm0101040201_pi300-10000_cl_sm2.00.img.gz, (257, 243) - (288, 274)
[Tue Sep  4 18:56:51 2012] XMMSAS bgd. selection expression = annulus(23673.146400, 22431.113200, 453.075013, 906.150026, X, Y)
[Tue Sep  4 18:56:51 2012] Writing fullrun_mos1_xmm0101040201_pi300-10000_pass1_cl_src1.gif
[Tue Sep  4 18:59:23 2012] Mean detx,y = (2498.12, -6.30) 
[Tue Sep  4 18:59:24 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 18:59:28 2012] grppha failed
[Tue Sep  4 18:59:28 2012] Setting source spectrum file to fullrun_mos1_xmm0101040201_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Sep  4 18:59:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0101040201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Sep  4 19:02:29 2012] Updating aperture counts using extracted products
[Tue Sep  4 19:02:29 2012] Error reading totcts from fullrun_mos1_xmm0101040201_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Sep  4 19:02:29 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 19:02:31 2012] Source 1 has no response, skipping
[Tue Sep  4 19:02:32 2012] xmm0101040201/analysis//spectral/fullrun_mos1_xmm0101040201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete