[Wed Aug  1 10:01:54 2012] Detection parameters:
  Position = (341.0, 389.7) = 0 6 12.95 20 18 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.0 +/- 16.5
  Background counts = 29.8
  Rate = 0.009 +/- 0.0009

[Wed Aug  1 10:01:57 2012] Off-axis axis estimate = 7.30'
[Wed Aug  1 10:07:50 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:07:50 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Wed Aug  1 10:07:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.914
[Wed Aug  1 10:07:50 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 10.08"
[Wed Aug  1 14:21:25 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src44.ximg exists
[Wed Aug  1 14:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src44.csv
[Wed Aug  1 14:21:25 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src44_1.ximg exists
[Wed Aug  1 14:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src44.csv
[Wed Aug  1 14:21:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 14:21:26 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Wed Aug  1 14:21:26 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Wed Aug  1 14:21:26 2012] Fit fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Wed Aug  1 16:06:38 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 12.866340 pixels away
[Wed Aug  1 16:06:39 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 16:06:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 16:06:39 2012] Assessing source extent using major
[Wed Aug  1 16:06:39 2012] Source does appear to be extended
[Wed Aug  1 16:06:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 16:06:57 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 16:06:57 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Wed Aug  1 16:06:57 2012] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.914
[Wed Aug  1 16:06:57 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 10.08"
[Wed Aug  1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src38.ximg exists
[Wed Aug  1 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src38.csv
[Wed Aug  1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src38_1.ximg exists
[Wed Aug  1 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src38.csv
[Wed Aug  1 18:42:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 18:42:10 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Wed Aug  1 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed Aug  1 18:42:10 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Wed Aug  1 18:42:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Wed Aug  1 18:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 19:09:49 2012] Spatial fit model total counts = 464.111000, observed total counts = 380.000000
[Wed Aug  1 19:09:49 2012] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 19:09:49 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 19:09:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 19:09:49 2012] Assessing source extent using major
[Wed Aug  1 19:09:49 2012] Source does appear to be extended
[Wed Aug  1 19:09:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 19:10:00 2012] XMMSAS src. selection expression = ellipse(29619.917786, 33853.829285, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  1 19:10:00 2012] Writing source region out to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src44_src.reg
[Wed Aug  1 19:10:00 2012] Extracting stamp from image fullrun_pn_xmm0101040101_pi300-10000_cl_sm2.00.img.gz, (304, 352) - (379, 427)
[Wed Aug  1 19:10:00 2012] XMMSAS bgd. selection expression = annulus(29619.917786, 33853.829285, 1087.500000, 2175.000000, X, Y) && !ellipse(31272.840790, 36255.868805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.221619, 35974.103821, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 19:10:00 2012] Writing fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src44.gif
[Wed Aug  1 21:12:34 2012] Mean detx,y = (-1684.35, -7241.27) 
[Wed Aug  1 21:12:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 21:13:02 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 21:13:02 2012] Setting source spectrum file to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Aug  1 21:13:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Wed Aug  1 23:16:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  1 23:16:17 2012] rmf not generated due to insufficient counts
[Thu Aug  2 00:01:28 2012] Updating aperture counts using extracted products
[Thu Aug  2 00:01:28 2012] Error reading totcts from fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Aug  2 00:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 00:01:29 2012] Using photon index=1.80, rate=0.00907, arf fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src44.arf
[Thu Aug  2 00:01:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 00:01:29 2012] Updating source flux to 4.3e-14
[Thu Aug  2 00:02:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting