[Wed Aug 1 10:01:51 2012] Detection parameters: Position = (276.0, 227.9) = 0 6 33.05 20 6 33.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1549.6 +/- 49.3 Background counts = 39.8 Rate = 0.08 +/- 0.002 [Wed Aug 1 10:01:57 2012] Off-axis axis estimate = 5.36' [Wed Aug 1 10:07:50 2012] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 10:07:50 2012] Initial guess for spatial extent in simple fitting = 9.11" [Wed Aug 1 10:07:50 2012] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.337 [Wed Aug 1 10:07:50 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.11" [Wed Aug 1 14:21:25 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src12.ximg exists [Wed Aug 1 14:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src12.csv [Wed Aug 1 14:21:25 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src12_1.ximg exists [Wed Aug 1 14:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src12.csv [Wed Aug 1 14:21:25 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 14:21:26 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists [Wed Aug 1 14:21:26 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists [Wed Aug 1 14:21:26 2012] Fit fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly [Wed Aug 1 16:06:38 2012] Spatial fit model total counts = 4179.220000, observed total counts = 4084.000000 [Wed Aug 1 16:06:38 2012] Offset between fit and detection position for source 12 = 2.625644 pixels [Wed Aug 1 16:06:38 2012] Warning, changing simple spatial fit ID from 12 to 10 [Wed Aug 1 16:06:38 2012] 4577.580000 total counts/ 2432.600000 bgd. counts: snr = 43.489849 Spatial fit parameters: Offset between fit and detection position for source 12 = 2.625644 pixels Position = (277.2, 230.3) = 0 6 32.67 20 6 44.1 Extent = 12.0 (12.0-12.0)", rotation angle = 0 Source counts = 2145.0 +/- 67.7 Background counts = 2432.6 Rate = 0.07 +/- 0.002 [Wed Aug 1 16:06:39 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 16:06:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 16:06:39 2012] Assessing source extent using major axis lower bound [Wed Aug 1 16:06:39 2012] Source does appear to be extended [Wed Aug 1 16:06:39 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 16:06:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 1 16:06:57 2012] Initial guess for spatial extent in simple fitting = 11.96" [Wed Aug 1 16:06:57 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.994 [Wed Aug 1 16:06:57 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 11.96" [Wed Aug 1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src12.ximg exists [Wed Aug 1 18:42:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src12.csv [Wed Aug 1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src12_1.ximg exists [Wed Aug 1 18:42:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src12.csv [Wed Aug 1 18:42:09 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 18:42:10 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Wed Aug 1 18:42:10 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Wed Aug 1 18:42:10 2012] Fit fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly [Wed Aug 1 19:09:49 2012] Warning, spatial fit 12 centroid is now closest to src. 10 [Wed Aug 1 19:09:49 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 19:09:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 19:09:49 2012] Assessing source extent using major axis lower bound [Wed Aug 1 19:09:49 2012] Source does appear to be extended [Wed Aug 1 19:09:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 19:09:49 2012] Source is confused with source 10 [Wed Aug 1 19:09:59 2012] Counts = 2144.980000, rescaling region sizes by 2.000000 [Wed Aug 1 19:09:59 2012] XMMSAS src. selection expression = ellipse(24068.996000, 19984.122000, 1435.716041, 1435.716041, 0.000000, X, Y) [Wed Aug 1 19:09:59 2012] Writing source region out to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src12_src.reg [Wed Aug 1 19:09:59 2012] Extracting stamp from image fullrun_pn_xmm0101040101_pi300-10000_cl_sm2.00.img.gz, (195, 148) - (360, 313) [Wed Aug 1 19:09:59 2012] XMMSAS bgd. selection expression = annulus(24068.996000, 19984.122000, 4785.720138, 9571.440275, X, Y) && !ellipse(27789.497300, 26495.293000, 1895.364055, 1895.364055, 0.000000, X, Y) && !ellipse(24915.882904, 14205.646057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13893.799591, 29299.402649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20655.573776, 25446.161285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.440000, 23409.936000, 1226.936035, 1226.936035, 0.000000, X, Y) && !ellipse(25817.784000, 23067.702000, 1604.328046, 1194.904034, 90.000000, X, Y) && !ellipse(25606.000000, 22622.328000, 2435.256070, 2435.256070, 0.000000, X, Y) && !ellipse(25434.325320, 22208.495387, 1807.000487, 1051.751196, 139.237463, X, Y) && !ellipse(24559.216000, 20844.664000, 1609.160046, 1609.160046, 0.000000, X, Y) && !ellipse(24854.070000, 21370.662000, 905.512026, 905.512026, 0.000000, X, Y) && !ellipse(23158.954000, 18305.350000, 1404.048040, 1404.048040, 0.000000, X, Y) && !ellipse(22529.111440, 17221.734881, 1654.416048, 430.634178, 120.485364, X, Y) && !ellipse(32921.202454, 16551.594101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21805.338618, 15943.328022, 2197.176063, 438.224859, 120.429450, X, Y) && !ellipse(21253.086000, 14975.167000, 2197.176063, 453.535213, 120.223300, X, Y) && !ellipse(20821.446732, 14233.150833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30576.662903, 29685.491699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.602325, 28325.806061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28275.235718, 27987.470367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.535004, 27371.137177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21874.047699, 25623.912842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.324799, 24299.199249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16228.442520, 22860.114960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30266.576721, 16514.280319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29535.564850, 28466.703156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13712.273911, 22127.105179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27686.353980, 21783.073200, 423.474412, 423.474412, 0.000000, X, Y) [Wed Aug 1 19:09:59 2012] Writing fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src12.gif [Wed Aug 1 20:16:18 2012] Mean detx,y = (277.09, 7548.50) [Wed Aug 1 20:16:24 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 1 20:20:26 2012] Binned source spectrum to 10 counts/bin [Wed Aug 1 20:20:26 2012] Setting source spectrum file to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src12_src_b10.pi.gz [Wed Aug 1 20:20:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src12_bgd.pi.gz [Thu Aug 2 00:01:27 2012] Updating aperture counts using extracted products [Thu Aug 2 00:01:27 2012] Error reading totcts from fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src12_src_b10.pi.gz [Thu Aug 2 00:01:28 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 2 00:01:28 2012] Using photon index=1.80, rate=0.0678, arf fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src12.arf [Thu Aug 2 00:01:28 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 2 00:01:28 2012] Updating source flux to 2.2e-13 [Thu Aug 2 00:02:21 2012] Flag c found in src. 12 procflags, skipping spectral fitting