[Wed Aug 1 10:01:51 2012] Detection parameters: Position = (280.1, 235.0) = 0 6 31.77 20 7 4.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1377.8 +/- 47.3 Background counts = 41.8 Rate = 0.06 +/- 0.002 [Wed Aug 1 10:01:57 2012] Off-axis axis estimate = 4.79' [Wed Aug 1 10:07:50 2012] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 10:07:50 2012] Initial guess for spatial extent in simple fitting = 8.82" [Wed Aug 1 10:07:50 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978 [Wed Aug 1 10:07:50 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.82" [Wed Aug 1 14:21:24 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src10.ximg exists [Wed Aug 1 14:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src10.csv [Wed Aug 1 14:21:24 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src10_1.ximg exists [Wed Aug 1 14:21:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src10.csv [Wed Aug 1 14:21:25 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 14:21:26 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Wed Aug 1 14:21:26 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Wed Aug 1 14:21:26 2012] Fit fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Wed Aug 1 16:06:38 2012] Warning, spatial fit 10 centroid is now closest to src. 12 [Wed Aug 1 16:06:38 2012] Spatial fit model total counts = 4125.680000, observed total counts = 4121.000000 [Wed Aug 1 16:06:38 2012] Offset between fit and detection position for source 10 = 2.787031 pixels [Wed Aug 1 16:06:38 2012] Warning, changing simple spatial fit ID from 10 to 11 [Wed Aug 1 16:06:38 2012] 4488.810000 total counts/ 2416.330000 bgd. counts: snr = 42.161128 Spatial fit parameters: Offset between fit and detection position for source 10 = 2.787031 pixels Position = (281.2, 237.5) = 0 6 31.43 20 7 15.7 Extent = 11.0 (11.0-11.0)", rotation angle = 0 Source counts = 2072.5 +/- 67.0 Background counts = 2416.3 Rate = 0.07 +/- 0.002 [Wed Aug 1 16:06:39 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 16:06:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 16:06:39 2012] Assessing source extent using major axis lower bound [Wed Aug 1 16:06:39 2012] Source does appear to be extended [Wed Aug 1 16:06:39 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 16:06:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 1 16:06:57 2012] Initial guess for spatial extent in simple fitting = 11.02" [Wed Aug 1 16:06:57 2012] source mask rpix=2.5, npix_max = 36, mask sum = 42, frac = 1.141 [Wed Aug 1 16:06:57 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 11.02" [Wed Aug 1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src10.ximg exists [Wed Aug 1 18:42:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src10.csv [Wed Aug 1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src10_1.ximg exists [Wed Aug 1 18:42:09 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src10.csv [Wed Aug 1 18:42:09 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 18:42:10 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Wed Aug 1 18:42:10 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src10.csv [Wed Aug 1 18:42:10 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Wed Aug 1 18:42:10 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src10.csv [Wed Aug 1 18:42:10 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 19:09:49 2012] Warning, spatial fit 10 centroid is now closest to src. 11 [Wed Aug 1 19:09:49 2012] Spatial fit model total counts = 4146.900000, observed total counts = 4203.000000 [Wed Aug 1 19:09:49 2012] Offset between fit and detection position for source 10 = 3.082666 pixels [Wed Aug 1 19:09:49 2012] Warning, changing simple spatial fit ID from 10 to 11 [Wed Aug 1 19:09:49 2012] 4712.661000 total counts/ 459.721000 bgd. counts: snr = 198.354512 Spatial fit parameters: Offset between fit and detection position for source 10 = 3.082666 pixels Position = (282.8, 240.2) = 0 6 30.93 20 7 27.2 Extent = 20.1 (19.8-20.3)", rotation angle = 0 Source counts = 4252.9 +/- 68.6 Background counts = 459.7 Rate = 0.1 +/- 0.002 [Wed Aug 1 19:09:49 2012] Source 10 is offset by 0.694184 and -2.350299 pixels which is larger than 2 X fitted extent = 1.445931 x 1.445931, not incorporating fit results [Wed Aug 1 19:09:49 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 19:09:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 19:09:49 2012] Assessing source extent using major axis lower bound [Wed Aug 1 19:09:49 2012] Source does appear to be extended [Wed Aug 1 19:09:49 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 19:09:49 2012] Source is confused with source 11 [Wed Aug 1 19:09:49 2012] Source is confused with source 12 [Wed Aug 1 19:09:59 2012] Counts = 4252.940000, rescaling region sizes by 2.000000 [Wed Aug 1 19:09:59 2012] XMMSAS src. selection expression = ellipse(24559.216000, 20844.664000, 2413.740069, 2413.740069, 0.000000, X, Y) [Wed Aug 1 19:09:59 2012] Writing source region out to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src10_src.reg [Wed Aug 1 19:09:59 2012] Extracting stamp from image fullrun_pn_xmm0101040101_pi300-10000_cl_sm2.00.img.gz, (144, 101) - (422, 379) [Wed Aug 1 19:09:59 2012] XMMSAS bgd. selection expression = annulus(24559.216000, 20844.664000, 8045.800232, 16091.600463, X, Y) && !ellipse(27789.497300, 26495.293000, 1895.364055, 1895.364055, 0.000000, X, Y) && !ellipse(24915.882904, 14205.646057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13893.799591, 29299.402649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20655.573776, 25446.161285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.440000, 23409.936000, 1226.936035, 1226.936035, 0.000000, X, Y) && !ellipse(25817.784000, 23067.702000, 1604.328046, 1194.904034, 90.000000, X, Y) && !ellipse(25606.000000, 22622.328000, 2435.256070, 2435.256070, 0.000000, X, Y) && !ellipse(25434.325320, 22208.495387, 1807.000487, 1051.751196, 139.237463, X, Y) && !ellipse(24854.070000, 21370.662000, 905.512026, 905.512026, 0.000000, X, Y) && !ellipse(24068.996000, 19984.122000, 957.144028, 957.144028, 0.000000, X, Y) && !ellipse(36505.322083, 19686.311523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23158.954000, 18305.350000, 1404.048040, 1404.048040, 0.000000, X, Y) && !ellipse(22529.111440, 17221.734881, 1654.416048, 430.634178, 120.485364, X, Y) && !ellipse(32921.202454, 16551.594101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21805.338618, 15943.328022, 2197.176063, 438.224859, 120.429450, X, Y) && !ellipse(21253.086000, 14975.167000, 2197.176063, 453.535213, 120.223300, X, Y) && !ellipse(20821.446732, 14233.150833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31272.840790, 36255.868805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.221619, 35974.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35908.059967, 32593.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14407.373856, 31954.657623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25600.046783, 30577.239044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30576.662903, 29685.491699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13426.031219, 28598.214722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.602325, 28325.806061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28275.235718, 27987.470367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36257.690155, 27645.486664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.535004, 27371.137177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21874.047699, 25623.912842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.324799, 24299.199249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16228.442520, 22860.114960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12193.834778, 21170.422455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10513.136848, 20727.700302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30266.576721, 16514.280319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29619.917786, 33853.829285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23019.371500, 33043.798400, 352.585610, 352.585610, 0.000000, X, Y) && !ellipse(29535.564850, 28466.703156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36874.371155, 22187.886765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13712.273911, 22127.105179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27686.353980, 21783.073200, 423.474412, 423.474412, 0.000000, X, Y) [Wed Aug 1 19:09:59 2012] Writing fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src10.gif [Wed Aug 1 20:02:39 2012] Mean detx,y = (302.73, 6490.19) [Wed Aug 1 20:02:47 2012] Setting backscal keywords in source and bgd. spectrum [Wed Aug 1 20:11:51 2012] Binned source spectrum to 10 counts/bin [Wed Aug 1 20:11:52 2012] Setting source spectrum file to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Wed Aug 1 20:11:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src10_bgd.pi.gz [Thu Aug 2 00:01:27 2012] Updating aperture counts using extracted products [Thu Aug 2 00:01:27 2012] Error reading totcts from fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Thu Aug 2 00:01:28 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 2 00:01:28 2012] Using photon index=1.80, rate=0.134, arf fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src10.arf [Thu Aug 2 00:01:28 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 2 00:01:28 2012] Updating source flux to 3.8e-13 [Thu Aug 2 00:02:21 2012] Flag b found in src. 10 procflags, skipping spectral fitting [Thu Aug 2 00:02:21 2012] Flag c found in src. 10 procflags, skipping spectral fitting