[Wed Aug  1 10:01:50 2012] Detection parameters:
  Position = (320.1, 305.0) = 0 6 19.42 20 12 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 537086.9 +/- 817.4
  Background counts = 65.4
  Rate = 2e+01 +/- 0.03

[Wed Aug  1 10:01:57 2012] Off-axis axis estimate = 1.64'
[Wed Aug  1 10:07:50 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:07:50 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Aug  1 10:07:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Aug  1 10:07:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Aug  1 14:21:24 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  1 14:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 14:21:24 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  1 14:21:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 14:21:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 14:21:26 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  1 14:21:26 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  1 14:21:26 2012] Fit fullrun_pn_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  1 16:06:38 2012] Spatial fit model total counts = 471058.000000, observed total counts = 496511.000000
[Wed Aug  1 16:06:38 2012] Offset between fit and detection position for source 1 = 0.156931 pixels
[Wed Aug  1 16:06:38 2012] 470770.000000 total counts/ 25600.000000 bgd. counts: snr = 2782.312500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.156931 pixels
  Position = (320.0, 305.1) = 0 6 19.46 20 12 9.7
  Extent = 7.9 (7.9-7.9)", rotation angle = 0
  Source counts = 445170.0 +/- 686.1
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Wed Aug  1 16:06:39 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 16:06:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 16:06:39 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 16:06:39 2012] Source does appear to be extended
[Wed Aug  1 16:06:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 16:06:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 16:06:57 2012] Initial guess for spatial extent in simple fitting = 7.90"
[Wed Aug  1 16:06:57 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.746
[Wed Aug  1 16:06:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.90"
[Wed Aug  1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  1 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  1 18:42:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 18:42:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  1 18:42:09 2012] fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  1 18:42:09 2012] Fit fullrun_pn_xmm0101040101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  1 19:09:49 2012] Spatial fit model total counts = 471058.000000, observed total counts = 496511.000000
[Wed Aug  1 19:09:49 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Wed Aug  1 19:09:49 2012] 470770.000000 total counts/ 25600.000000 bgd. counts: snr = 2782.312500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (320.0, 305.1) = 0 6 19.46 20 12 9.7
  Extent = 7.9 (7.9-7.9)", rotation angle = 0
  Source counts = 445170.0 +/- 686.1
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Wed Aug  1 19:09:49 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 19:09:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 19:09:49 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 19:09:49 2012] Source does appear to be extended
[Wed Aug  1 19:09:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 19:09:59 2012] Counts = 445170.000000, rescaling region sizes by 3.000000
[Wed Aug  1 19:09:59 2012] XMMSAS src. selection expression = ellipse(27789.497300, 26495.293000, 1421.523041, 1421.523041, 0.000000, X, Y)
[Wed Aug  1 19:09:59 2012] Writing source region out to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  1 19:09:59 2012] Extracting stamp from image fullrun_pn_xmm0101040101_pi300-10000_cl_sm2.00.img.gz, (238, 223) - (402, 387)
[Wed Aug  1 19:09:59 2012] XMMSAS bgd. selection expression = annulus(27789.497300, 26495.293000, 7107.615205, 14215.230409, X, Y) && !ellipse(24915.882904, 14205.646057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13893.799591, 29299.402649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20655.573776, 25446.161285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26040.440000, 23409.936000, 1226.936035, 1226.936035, 0.000000, X, Y) && !ellipse(25817.784000, 23067.702000, 1604.328046, 1194.904034, 90.000000, X, Y) && !ellipse(25606.000000, 22622.328000, 2435.256070, 2435.256070, 0.000000, X, Y) && !ellipse(25434.325320, 22208.495387, 1807.000487, 1051.751196, 139.237463, X, Y) && !ellipse(24559.216000, 20844.664000, 1609.160046, 1609.160046, 0.000000, X, Y) && !ellipse(24854.070000, 21370.662000, 905.512026, 905.512026, 0.000000, X, Y) && !ellipse(24068.996000, 19984.122000, 957.144028, 957.144028, 0.000000, X, Y) && !ellipse(36505.322083, 19686.311523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23158.954000, 18305.350000, 1404.048040, 1404.048040, 0.000000, X, Y) && !ellipse(22529.111440, 17221.734881, 1654.416048, 430.634178, 120.485364, X, Y) && !ellipse(32921.202454, 16551.594101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21805.338618, 15943.328022, 2197.176063, 438.224859, 120.429450, X, Y) && !ellipse(21253.086000, 14975.167000, 2197.176063, 453.535213, 120.223300, X, Y) && !ellipse(20821.446732, 14233.150833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31272.840790, 36255.868805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.221619, 35974.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35908.059967, 32593.555908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14407.373856, 31954.657623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25600.046783, 30577.239044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30576.662903, 29685.491699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13426.031219, 28598.214722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.602325, 28325.806061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28275.235718, 27987.470367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36257.690155, 27645.486664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29394.535004, 27371.137177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21874.047699, 25623.912842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.324799, 24299.199249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16228.442520, 22860.114960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30266.576721, 16514.280319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34500.692657, 41006.589722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29619.917786, 33853.829285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23019.371500, 33043.798400, 352.585610, 352.585610, 0.000000, X, Y) && !ellipse(29535.564850, 28466.703156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36874.371155, 22187.886765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13712.273911, 22127.105179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27686.353980, 21783.073200, 423.474412, 423.474412, 0.000000, X, Y)
[Wed Aug  1 19:09:59 2012] Writing fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1.gif
[Wed Aug  1 19:10:50 2012] Mean detx,y = (286.55, 59.12) 
[Wed Aug  1 19:10:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 19:18:32 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 19:18:32 2012] Setting source spectrum file to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 19:18:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  2 00:01:27 2012] Updating aperture counts using extracted products
[Thu Aug  2 00:01:27 2012] Error reading totcts from fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 00:01:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 00:01:28 2012] Using photon index=1.80, rate=14.1, arf fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 00:01:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 00:01:28 2012] Updating source flux to 3.2e-11
[Thu Aug  2 00:04:20 2012] Reading fit data from xmm0101040101/analysis//spectral/fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug  2 00:04:20 2012] Spectral fit parameter nH value = 5.92555e+19
[Thu Aug  2 00:04:20 2012] Spectral fit parameter PhoIndex value = 2.39829
[Thu Aug  2 00:04:20 2012] Failed to get F(0.3-8.0) from xmm0101040101/analysis//spectral/fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 00:04:20 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 00:04:20 2012] Using Nh = 5.9e+19, photon index=2.40, rate=14.1, arf fullrun_pn_xmm0101040101_pi300-10000_pass1_cl_src1.arf
[Thu Aug  2 00:04:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 00:04:20 2012] Updating source flux to 2.4e-11