[Wed Aug  1 10:03:16 2012] Detection parameters:
  Position = (255.3, 200.2) = 0 6 39.44 20 4 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.6 +/- 12.9
  Background counts = 7.6
  Rate = 0.003 +/- 0.0004

[Wed Aug  1 10:03:18 2012] Off-axis axis estimate = 7.78'
[Wed Aug  1 14:59:06 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 14:59:06 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Wed Aug  1 14:59:06 2012] source mask rpix=2.4, npix_max = 32, mask sum = 23, frac = 0.697
[Wed Aug  1 14:59:06 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.32"
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Aug  1 16:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src14.csv
[Wed Aug  1 16:06:20 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Aug  1 16:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src14.csv
[Wed Aug  1 16:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 16:06:21 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Aug  1 16:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Aug  1 16:06:21 2012] fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Aug  1 16:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed Aug  1 16:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0101040101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 16:06:49 2012] Source 9 is offset by 6.809251 and 5.764390 pixels which is larger than
2 X fitted extent = 0.814929 x 0.814929, not incorporating fit results
[Wed Aug  1 16:06:49 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 16:06:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 16:06:49 2012] Assessing source extent using major
[Wed Aug  1 16:06:49 2012] Source does appear to be extended
[Wed Aug  1 16:06:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 16:06:49 2012] Deleting source due to low Poisson probability 1.0